[Fri Jun  1 16:46:02 2012] Detection parameters:
  Position = (279.7, 283.8) = 12 56 15.17 -5 46 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.5 +/- 12.2
  Background counts = 17.2
  Rate = 0.002 +/- 0.0005

[Fri Jun  1 16:46:02 2012] Off-axis axis estimate = 1.72'
[Fri Jun  1 18:28:04 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 18:28:04 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Jun  1 18:28:04 2012] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.739
[Fri Jun  1 18:28:04 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 7.29"
[Fri Jun  1 19:14:48 2012] fullrun_mos2_xmm0556030101_pi300-10000_cl_pass0_src18.ximg exists
[Fri Jun  1 19:14:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556030101_pi300-10000_cl_pass0_src18.csv
[Fri Jun  1 19:14:48 2012] fullrun_mos2_xmm0556030101_pi300-10000_cl_pass0_src18_1.ximg exists
[Fri Jun  1 19:14:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556030101_pi300-10000_cl_pass0_src18.csv
[Fri Jun  1 19:14:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556030101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556030101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 19:14:48 2012] fullrun_mos2_xmm0556030101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Fri Jun  1 19:14:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556030101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Fri Jun  1 19:14:48 2012] fullrun_mos2_xmm0556030101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Fri Jun  1 19:14:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556030101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Fri Jun  1 19:14:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556030101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556030101_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 19:15:03 2012] Source 14 is offset by 7.386935 and -5.492636 pixels which is larger than
2 X fitted extent = 3.979669 x 3.979669, not incorporating fit results
[Fri Jun  1 19:15:03 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 19:15:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 19:15:03 2012] Assessing source extent using major
[Fri Jun  1 19:15:03 2012] Source does appear to be extended
[Fri Jun  1 19:15:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 19:15:03 2012] Deleting source due to low Poisson probability 0.9