[Fri Jun  1 16:45:40 2012] Detection parameters:
  Position = (293.2, 275.8) = 12 56 11.24 -5 47 20.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36952.6 +/- 227.2
  Background counts = 21.8
  Rate = 1 +/- 0.009

[Fri Jun  1 16:45:40 2012] Off-axis axis estimate = 1.68'
[Fri Jun  1 18:13:49 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 18:13:49 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Fri Jun  1 18:13:49 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Fri Jun  1 18:13:49 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Fri Jun  1 18:28:04 2012] fullrun_mos1_xmm0556030101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun  1 18:28:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556030101_pi300-10000_cl_pass0_src1.csv
[Fri Jun  1 18:28:04 2012] fullrun_mos1_xmm0556030101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun  1 18:28:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556030101_pi300-10000_cl_pass0_src1.csv
[Fri Jun  1 18:28:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556030101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556030101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 18:28:04 2012] fullrun_mos1_xmm0556030101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun  1 18:28:04 2012] fullrun_mos1_xmm0556030101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun  1 18:28:04 2012] Fit fullrun_mos1_xmm0556030101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun  1 19:15:00 2012] Spatial fit model total counts = 31900.100000, observed total counts = 31905.000000
[Fri Jun  1 19:15:00 2012] Offset between fit and detection position for source 1 = 0.150072 pixels
[Fri Jun  1 19:15:00 2012] 31902.310000 total counts/ 6730.910000 bgd. counts: snr = 306.810684
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.150072 pixels
  Position = (293.2, 275.7) = 12 56 11.23 -5 47 21.1
  Extent = 5.5 (5.5-5.6)", rotation angle = 0
  Source counts = 25171.4 +/- 178.6
  Background counts = 6730.9
  Rate = 1 +/- 0.007
[Fri Jun  1 19:15:00 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 19:15:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 19:15:00 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 19:15:00 2012] Source does appear to be extended
[Fri Jun  1 19:15:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 21:17:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 21:17:07 2012] Initial guess for spatial extent in simple fitting = 5.54"
[Fri Jun  1 21:17:07 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.954
[Fri Jun  1 21:17:07 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.54"
[Fri Jun  1 21:24:00 2012] fullrun_mos1_xmm0556030101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun  1 21:24:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556030101_pi300-10000_cl_pass1_src1.csv
[Fri Jun  1 21:24:00 2012] fullrun_mos1_xmm0556030101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun  1 21:24:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556030101_pi300-10000_cl_pass1_src1.csv
[Fri Jun  1 21:24:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556030101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556030101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 21:24:00 2012] fullrun_mos1_xmm0556030101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun  1 21:24:00 2012] fullrun_mos1_xmm0556030101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun  1 21:24:00 2012] Fit fullrun_mos1_xmm0556030101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun  1 21:59:13 2012] Spatial fit model total counts = 31959.000000, observed total counts = 31959.000000
[Fri Jun  1 21:59:13 2012] Offset between fit and detection position for source 1 = 0.011295 pixels
[Fri Jun  1 21:59:13 2012] 32072.020000 total counts/ 6855.720000 bgd. counts: snr = 304.547351
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.011295 pixels
  Position = (293.2, 275.7) = 12 56 11.23 -5 47 21.2
  Extent = 5.6 (5.5-5.6)", rotation angle = 0
  Source counts = 25216.3 +/- 179.1
  Background counts = 6855.7
  Rate = 1 +/- 0.007
[Fri Jun  1 21:59:13 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 21:59:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 21:59:13 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 21:59:13 2012] Source does appear to be extended
[Fri Jun  1 21:59:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 00:17:07 2012] Counts = 25216.300000, rescaling region sizes by 3.000000
[Sat Jun  2 00:17:07 2012] XMMSAS src. selection expression = ellipse(25463.053000, 23933.580800, 999.367229, 999.367229, 0.000000, X, Y)
[Sat Jun  2 00:17:07 2012] Writing source region out to fullrun_mos1_xmm0556030101_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun  2 00:17:07 2012] Extracting stamp from image fullrun_mos1_xmm0556030101_pi300-10000_cl_sm2.00.img.gz, (236, 218) - (351, 333)
[Sat Jun  2 00:17:07 2012] XMMSAS bgd. selection expression = annulus(25463.053000, 23933.580800, 4996.836144, 9993.672288, X, Y) && !ellipse(21942.656311, 25877.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35871.144440, 34557.969604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25929.436000, 22416.804000, 839.336024, 839.336024, 0.000000, X, Y)
[Sat Jun  2 00:17:07 2012] Writing fullrun_mos1_xmm0556030101_pi300-10000_pass1_cl_src1.gif
[Sat Jun  2 00:17:12 2012] Mean detx,y = (248.63, -186.24) 
[Sat Jun  2 00:17:13 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  2 00:19:48 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  2 00:19:48 2012] Setting source spectrum file to fullrun_mos1_xmm0556030101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  2 00:19:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0556030101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun  2 00:44:30 2012] Updating aperture counts using extracted products
[Sat Jun  2 00:44:30 2012] Error reading totcts from fullrun_mos1_xmm0556030101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  2 00:44:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 00:44:30 2012] Using photon index=1.80, rate=0.959, arf fullrun_mos1_xmm0556030101_pi300-10000_pass1_cl_src1.arf
[Sat Jun  2 00:44:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 00:44:30 2012] Updating source flux to 8.6e-12
[Sat Jun  2 00:44:52 2012] Reading fit data from xmm0556030101/analysis//spectral/fullrun_mos1_xmm0556030101_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jun  2 00:44:52 2012] Spectral fit parameter nH value = 2.86598e+20
[Sat Jun  2 00:44:52 2012] Spectral fit parameter PhoIndex value = 1.79304
[Sat Jun  2 00:44:52 2012] Failed to get F(0.3-8.0) from xmm0556030101/analysis//spectral/fullrun_mos1_xmm0556030101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jun  2 00:44:52 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 00:44:52 2012] Using Nh = 2.9e+20, photon index=1.79, rate=0.959, arf fullrun_mos1_xmm0556030101_pi300-10000_pass1_cl_src1.arf
[Sat Jun  2 00:44:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 00:44:52 2012] Updating source flux to 8.9e-12