[Mon Feb 20 10:40:37 2012] Detection parameters:
  Position = (347.8, 378.2) = 15 9 15.57 7 37 31.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.4 +/- 24.2
  Background counts = 208.7
  Rate = 0.004 +/- 0.0008

[Mon Feb 20 10:40:39 2012] Off-axis axis estimate = 6.80'
[Mon Feb 20 10:46:08 2012] Using EEF radius (= 9.83 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 10:46:08 2012] Initial guess for spatial extent in simple fitting = 9.83"
[Mon Feb 20 10:46:08 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.182
[Mon Feb 20 10:46:08 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 9.83"
[Mon Feb 20 14:37:16 2012] fullrun_pn_xmm0556020101_pi300-10000_cl_pass0_src19.ximg exists
[Mon Feb 20 14:37:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556020101_pi300-10000_cl_pass0_src19.csv
[Mon Feb 20 14:37:16 2012] fullrun_pn_xmm0556020101_pi300-10000_cl_pass0_src19_1.ximg exists
[Mon Feb 20 14:37:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556020101_pi300-10000_cl_pass0_src19.csv
[Mon Feb 20 14:37:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556020101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556020101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 14:37:18 2012] fullrun_pn_xmm0556020101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Mon Feb 20 14:37:18 2012] fullrun_pn_xmm0556020101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Mon Feb 20 14:37:18 2012] Fit fullrun_pn_xmm0556020101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Mon Feb 20 18:33:06 2012] Warning, spatial fit 19 centroid is now closest to src. 25
[Mon Feb 20 18:33:06 2012] Spatial fit model total counts = 1988.660000, observed total counts = 1986.000000
[Mon Feb 20 18:33:06 2012] Offset between fit and detection position for source 21 = 5.779534 pixels
[Mon Feb 20 18:33:06 2012] Warning, changing simple spatial fit ID from 19 to 31
[Mon Feb 20 18:33:06 2012] 1959.081300 total counts/ 1859.150000 bgd. counts: snr = 2.317631
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 5.779534 pixels
  Position = (352.1, 374.2) = 15 9 14.33 7 37 14.2
  Extent = 13.8 (5.1-19.3)", rotation angle = 0
  Source counts = 99.9 +/- 44.3
  Background counts = 1859.2
  Rate = 0.003 +/- 0.001
[Mon Feb 20 18:33:06 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 18:33:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 18:33:06 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 18:33:06 2012] Source does appear to be extended
[Mon Feb 20 18:33:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 18:33:06 2012] Source is confused with source 22
[Mon Feb 20 18:33:06 2012] Source is confused with source 28
[Mon Feb 20 18:33:06 2012] Source is confused with source 30
[Mon Feb 20 18:33:06 2012] Source is confused with source 32
[Mon Feb 20 18:33:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 18:33:52 2012] Initial guess for spatial extent in simple fitting = 13.77"
[Mon Feb 20 18:33:52 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.041
[Mon Feb 20 18:33:52 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 13.77"
[Mon Feb 20 22:42:21 2012] fullrun_pn_xmm0556020101_pi300-10000_cl_pass1_src18.ximg exists
[Mon Feb 20 22:42:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556020101_pi300-10000_cl_pass1_src18.csv
[Mon Feb 20 22:42:21 2012] fullrun_pn_xmm0556020101_pi300-10000_cl_pass1_src18_1.ximg exists
[Mon Feb 20 22:42:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556020101_pi300-10000_cl_pass1_src18.csv
[Mon Feb 20 22:42:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556020101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556020101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 22:42:22 2012] fullrun_pn_xmm0556020101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Mon Feb 20 22:42:22 2012] fullrun_pn_xmm0556020101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Mon Feb 20 22:42:22 2012] Fit fullrun_pn_xmm0556020101_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Tue Feb 21 01:48:49 2012] Warning, spatial fit 18 centroid is now closest to src. 32
[Tue Feb 21 01:48:50 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 01:48:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 01:48:50 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 01:48:50 2012] Source does appear to be extended
[Tue Feb 21 01:48:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 01:49:29 2012] XMMSAS src. selection expression = ellipse(30581.510000, 32510.000000, 826.494024, 826.494024, 0.000000, X, Y)
[Tue Feb 21 01:49:29 2012] Writing source region out to fullrun_pn_xmm0556020101_pi300-10000_pass1_cl_src21_src.reg
[Tue Feb 21 01:49:29 2012] Extracting stamp from image fullrun_pn_xmm0556020101_pi300-10000_cl_sm2.00.img.gz, (305, 327) - (400, 422)
[Tue Feb 21 01:49:29 2012] XMMSAS bgd. selection expression = annulus(30581.510000, 32510.000000, 1377.490040, 2754.980079, X, Y) && !ellipse(33139.687469, 34342.328125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34064.096985, 35881.939789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32296.479370, 35128.307068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32119.409200, 34629.718000, 1775.696051, 1775.696051, 0.000000, X, Y) && !ellipse(27725.862000, 34420.880000, 1583.688046, 1583.688046, 0.000000, X, Y) && !ellipse(30611.629639, 33560.899902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30061.920000, 33333.890000, 1626.736047, 1626.736047, 0.000000, X, Y) && !ellipse(28776.201400, 33779.890000, 491.440814, 491.440814, 0.000000, X, Y) && !ellipse(28767.396000, 33302.458000, 3070.272088, 3070.272088, 0.000000, X, Y) && !ellipse(29223.580000, 33531.320000, 3119.488090, 3119.488090, 0.000000, X, Y) && !ellipse(29403.802000, 32332.690000, 1535.136044, 1535.136044, 0.000000, X, Y) && !ellipse(31181.295380, 32488.233551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31992.958000, 32544.858000, 1625.264047, 1625.264047, 0.000000, X, Y) && !ellipse(30752.270000, 32450.979200, 817.584024, 817.584024, 0.000000, X, Y) && !ellipse(30065.570000, 32804.478000, 2203.984063, 2203.984063, 0.000000, X, Y) && !ellipse(29946.797460, 30565.665800, 544.147216, 544.147216, 0.000000, X, Y)
[Tue Feb 21 01:49:29 2012] Writing fullrun_pn_xmm0556020101_pi300-10000_pass1_cl_src21.gif
[Tue Feb 21 02:07:20 2012] Mean detx,y = (5520.95, -3176.63) 
[Tue Feb 21 02:07:25 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 02:07:54 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 02:07:54 2012] Setting source spectrum file to fullrun_pn_xmm0556020101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Feb 21 02:07:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556020101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Tue Feb 21 03:31:36 2012] Not generating rmf since there are only 99 counts
[Tue Feb 21 03:31:36 2012] rmf not generated due to insufficient counts
[Tue Feb 21 07:37:33 2012] Updating aperture counts using extracted products
[Tue Feb 21 07:37:33 2012] Error reading totcts from fullrun_pn_xmm0556020101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Feb 21 07:37:35 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 07:37:35 2012] Using photon index=1.80, rate=0.00262, arf fullrun_pn_xmm0556020101_pi300-10000_pass1_cl_src21.arf
[Tue Feb 21 07:37:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 07:37:35 2012] Updating source flux to 8e-15
[Tue Feb 21 07:39:56 2012] Flag c found in src. 21 procflags, skipping spectral fitting
[Tue Feb 21 07:39:56 2012] Source 21 has fewer than 100.000000 counts, skipping spectral fitting