[Mon Feb 20 10:42:01 2012] Detection parameters:
  Position = (350.2, 185.6) = 15 9 14.89 7 23 35.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.5 +/- 13.2
  Background counts = 22.5
  Rate = 0.002 +/- 0.0003

[Mon Feb 20 10:42:01 2012] Off-axis axis estimate = 9.00'
[Mon Feb 20 16:38:42 2012] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 16:38:42 2012] Initial guess for spatial extent in simple fitting = 10.93"
[Mon Feb 20 16:38:42 2012] source mask rpix=2.5, npix_max = 36, mask sum = 27, frac = 0.744
[Mon Feb 20 16:38:42 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 10.93"
[Mon Feb 20 18:32:46 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_src17.ximg exists
[Mon Feb 20 18:32:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_src17.csv
[Mon Feb 20 18:32:46 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Feb 20 18:32:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_src17.csv
[Mon Feb 20 18:32:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 18:32:47 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Feb 20 18:32:47 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Feb 20 18:32:47 2012] Fit fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Mon Feb 20 18:33:28 2012] Source 33 is offset by -2.449104 and 8.480072 pixels which is larger than
2 X fitted extent = 1.433255 x 1.433255, not incorporating fit results
[Mon Feb 20 18:33:29 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 18:33:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 18:33:29 2012] Assessing source extent using major
[Mon Feb 20 18:33:29 2012] Source does appear to be extended
[Mon Feb 20 18:33:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 00:13:33 2012] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 00:13:33 2012] Initial guess for spatial extent in simple fitting = 10.93"
[Tue Feb 21 00:13:33 2012] source mask rpix=2.5, npix_max = 36, mask sum = 27, frac = 0.744
[Tue Feb 21 00:13:33 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 10.93"
[Tue Feb 21 01:48:30 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_src16.ximg exists
[Tue Feb 21 01:48:30 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue Feb 21 01:48:30 2012] Fit fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_src16 appears to have run properly
[Tue Feb 21 01:48:31 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue Feb 21 01:48:31 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue Feb 21 01:48:31 2012] Fit fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Tue Feb 21 01:49:07 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 12.499847 pixels away
[Tue Feb 21 01:49:07 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 01:49:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 01:49:07 2012] Assessing source extent using major
[Tue Feb 21 01:49:07 2012] Source does appear to be extended
[Tue Feb 21 01:49:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 06:12:14 2012] XMMSAS src. selection expression = ellipse(30415.499969, 16102.712280, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Feb 21 06:12:14 2012] Writing source region out to fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src33_src.reg
[Tue Feb 21 06:12:14 2012] Extracting stamp from image fullrun_mos2_xmm0556020101_pi300-10000_cl_sm2.00.img.gz, (313, 148) - (388, 223)
[Tue Feb 21 06:12:14 2012] XMMSAS bgd. selection expression = annulus(30415.499969, 16102.712280, 1087.500000, 2175.000000, X, Y)
[Tue Feb 21 06:12:14 2012] Writing fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src33.gif
[Tue Feb 21 06:17:08 2012] Mean detx,y = (235.08, -12355.12) 
[Tue Feb 21 06:17:10 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 06:17:30 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 06:17:30 2012] Setting source spectrum file to fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue Feb 21 06:17:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Tue Feb 21 07:00:54 2012] Not generating rmf since there are only 99 counts
[Tue Feb 21 07:00:54 2012] rmf not generated due to insufficient counts
[Tue Feb 21 07:37:39 2012] Updating aperture counts using extracted products
[Tue Feb 21 07:37:39 2012] Error reading totcts from fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue Feb 21 07:37:40 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 07:37:40 2012] Using photon index=1.80, rate=0.00217, arf fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src33.arf
[Tue Feb 21 07:37:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 07:37:40 2012] Updating source flux to 4.3e-14
[Tue Feb 21 07:38:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting