[Mon Feb 20 10:42:01 2012] Detection parameters:
  Position = (483.8, 313.8) = 15 8 35.79 7 32 51.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.5 +/- 12.9
  Background counts = 21.5
  Rate = 0.002 +/- 0.0003

[Mon Feb 20 10:42:01 2012] Off-axis axis estimate = 13.49'
[Mon Feb 20 16:38:42 2012] Using EEF radius (= 13.17 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 16:38:42 2012] Initial guess for spatial extent in simple fitting = 13.17"
[Mon Feb 20 16:38:42 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.984
[Mon Feb 20 16:38:42 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 13.17"
[Mon Feb 20 18:32:47 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_src31.ximg exists
[Mon Feb 20 18:32:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_src31.csv
[Mon Feb 20 18:32:47 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_src31_1.ximg exists
[Mon Feb 20 18:32:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_src31.csv
[Mon Feb 20 18:32:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 18:32:47 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Mon Feb 20 18:32:47 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Mon Feb 20 18:32:47 2012] Fit fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Mon Feb 20 18:33:28 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 12.177787 pixels away
[Mon Feb 20 18:33:29 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 18:33:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 18:33:29 2012] Assessing source extent using major
[Mon Feb 20 18:33:29 2012] Source does appear to be extended
[Mon Feb 20 18:33:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 00:13:33 2012] Using EEF radius (= 13.17 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 00:13:33 2012] Initial guess for spatial extent in simple fitting = 13.17"
[Tue Feb 21 00:13:33 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.984
[Tue Feb 21 00:13:33 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 13.17"
[Tue Feb 21 01:48:30 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_src28.ximg exists
[Tue Feb 21 01:48:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_src28.csv
[Tue Feb 21 01:48:30 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue Feb 21 01:48:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_src28.csv
[Tue Feb 21 01:48:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 01:48:31 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue Feb 21 01:48:31 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue Feb 21 01:48:31 2012] Fit fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Tue Feb 21 01:49:07 2012] Spatial fit model total counts = 334.995000, observed total counts = 335.000000
[Tue Feb 21 01:49:07 2012] Offset between fit and detection position for source 31 = 0.445872 pixels
[Tue Feb 21 01:49:07 2012] 335.340900 total counts/ 288.275000 bgd. counts: snr = 2.772062
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.445872 pixels
  Position = (483.6, 313.4) = 15 8 35.86 7 32 49.5
  Extent = 5.5 (3.4-8.6)", rotation angle = 0
  Source counts = 47.1 +/- 18.3
  Background counts = 288.3
  Rate = 0.001 +/- 0.0004
[Tue Feb 21 01:49:07 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 01:49:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 01:49:07 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 01:49:07 2012] Source does appear to be extended
[Tue Feb 21 01:49:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 06:12:14 2012] XMMSAS src. selection expression = ellipse(42022.916800, 27219.693800, 332.445610, 332.445610, 0.000000, X, Y)
[Tue Feb 21 06:12:14 2012] Writing source region out to fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src31_src.reg
[Tue Feb 21 06:12:14 2012] Extracting stamp from image fullrun_mos2_xmm0556020101_pi300-10000_cl_sm2.00.img.gz, (464, 294) - (503, 333)
[Tue Feb 21 06:12:14 2012] XMMSAS bgd. selection expression = annulus(42022.916800, 27219.693800, 554.076016, 1108.152032, X, Y)
[Tue Feb 21 06:12:14 2012] Writing fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src31.gif
[Tue Feb 21 06:22:23 2012] Mean detx,y = (-14446.28, -5688.37) 
[Tue Feb 21 06:22:24 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 06:22:32 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 06:22:32 2012] Setting source spectrum file to fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Tue Feb 21 06:22:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Tue Feb 21 07:02:02 2012] Not generating rmf since there are only 47 counts
[Tue Feb 21 07:02:02 2012] rmf not generated due to insufficient counts
[Tue Feb 21 07:37:39 2012] Updating aperture counts using extracted products
[Tue Feb 21 07:37:39 2012] Error reading totcts from fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Tue Feb 21 07:37:40 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 07:37:40 2012] Using photon index=1.80, rate=0.00103, arf fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src31.arf
[Tue Feb 21 07:37:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 07:37:40 2012] Updating source flux to 2.9e-14
[Tue Feb 21 07:38:49 2012] Source 31 has fewer than 100.000000 counts, skipping spectral fitting