[Mon Feb 20 10:42:00 2012] Detection parameters:
  Position = (285.3, 286.9) = 15 9 33.86 7 30 55.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1699.3 +/- 51.7
  Background counts = 52.1
  Rate = 0.04 +/- 0.001

[Mon Feb 20 10:42:01 2012] Off-axis axis estimate = 1.27'
[Mon Feb 20 16:38:42 2012] Using EEF radius (= 7.06 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 16:38:42 2012] Initial guess for spatial extent in simple fitting = 7.06"
[Mon Feb 20 16:38:42 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.887
[Mon Feb 20 16:38:42 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.06"
[Mon Feb 20 18:32:46 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Feb 20 18:32:46 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Feb 20 18:32:46 2012] Fit fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_src1 appears to have run properly
[Mon Feb 20 18:32:47 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Feb 20 18:32:47 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Feb 20 18:32:47 2012] Fit fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Feb 20 18:33:28 2012] Spatial fit model total counts = 1948.000000, observed total counts = 1948.000000
[Mon Feb 20 18:33:28 2012] Offset between fit and detection position for source 2 = 0.041352 pixels
[Mon Feb 20 18:33:28 2012] 1955.167000 total counts/ 854.547000 bgd. counts: snr = 37.650385
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.041352 pixels
  Position = (285.3, 286.9) = 15 9 33.85 7 30 54.4
  Extent = 4.9 (4.6-5.2)", rotation angle = 0
  Source counts = 1100.6 +/- 44.2
  Background counts = 854.5
  Rate = 0.02 +/- 0.001
[Mon Feb 20 18:33:28 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 18:33:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 18:33:28 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 18:33:28 2012] Source does appear to be extended
[Mon Feb 20 18:33:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 00:13:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 00:13:33 2012] Initial guess for spatial extent in simple fitting = 4.91"
[Tue Feb 21 00:13:33 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.132
[Tue Feb 21 00:13:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.91"
[Tue Feb 21 01:48:30 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Feb 21 01:48:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_src1.csv
[Tue Feb 21 01:48:30 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Feb 21 01:48:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_src1.csv
[Tue Feb 21 01:48:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 01:48:31 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Feb 21 01:48:31 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Feb 21 01:48:31 2012] Fit fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Feb 21 01:49:07 2012] Spatial fit model total counts = 1948.000000, observed total counts = 1948.000000
[Tue Feb 21 01:49:07 2012] Offset between fit and detection position for source 2 = 0.000000 pixels
[Tue Feb 21 01:49:07 2012] 1955.167000 total counts/ 854.547000 bgd. counts: snr = 37.650385
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000000 pixels
  Position = (285.3, 286.9) = 15 9 33.85 7 30 54.4
  Extent = 4.9 (4.6-5.2)", rotation angle = 0
  Source counts = 1100.6 +/- 44.2
  Background counts = 854.5
  Rate = 0.02 +/- 0.001
[Tue Feb 21 01:49:07 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 01:49:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 01:49:07 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 01:49:07 2012] Source does appear to be extended
[Tue Feb 21 01:49:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 06:12:14 2012] Counts = 1100.620000, rescaling region sizes by 2.000000
[Tue Feb 21 06:12:14 2012] XMMSAS src. selection expression = ellipse(24775.734600, 24912.948400, 588.922817, 588.922817, 0.000000, X, Y)
[Tue Feb 21 06:12:14 2012] Writing source region out to fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src2_src.reg
[Tue Feb 21 06:12:14 2012] Extracting stamp from image fullrun_mos2_xmm0556020101_pi300-10000_cl_sm2.00.img.gz, (251, 253) - (319, 321)
[Tue Feb 21 06:12:14 2012] XMMSAS bgd. selection expression = annulus(24775.734600, 24912.948400, 1963.076056, 3926.152113, X, Y) && !ellipse(26453.458344, 27902.250307, 606.726360, 462.037295, 132.297968, X, Y) && !ellipse(27052.005310, 28391.780884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26595.326996, 28733.735382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25502.790405, 27701.799835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26910.709961, 27366.950195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24801.469727, 27605.533783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23383.648400, 23031.182600, 271.524808, 271.524808, 0.000000, X, Y) && !ellipse(25589.989532, 28387.538147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23713.250214, 29328.193787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25779.205505, 27286.308990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25047.148000, 29947.098000, 2434.272070, 2434.272070, 0.000000, X, Y) && !ellipse(26371.797424, 27102.580963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29467.378387, 23284.375366, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 21 06:12:14 2012] Writing fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src2.gif
[Tue Feb 21 06:12:18 2012] Mean detx,y = (2593.72, -2197.29) 
[Tue Feb 21 06:12:19 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 06:12:32 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 06:12:32 2012] Setting source spectrum file to fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Feb 21 06:12:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Feb 21 07:37:38 2012] Updating aperture counts using extracted products
[Tue Feb 21 07:37:38 2012] Error reading totcts from fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Feb 21 07:37:39 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 07:37:39 2012] Using photon index=1.80, rate=0.024, arf fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src2.arf
[Tue Feb 21 07:37:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 07:37:39 2012] Updating source flux to 2.4e-13
[Tue Feb 21 07:39:56 2012] Reading fit data from xmm0556020101/analysis//spectral/fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src2_pl.csv
[Tue Feb 21 07:39:56 2012] Spectral fit parameter nH value = 4.24057e+20
[Tue Feb 21 07:39:56 2012] Spectral fit parameter PhoIndex value = 2.17111
[Tue Feb 21 07:39:56 2012] Failed to get F(0.3-8.0) from xmm0556020101/analysis//spectral/fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Feb 21 07:39:56 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 07:39:56 2012] Using Nh = 4.2e+20, photon index=2.17, rate=0.024, arf fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src2.arf
[Tue Feb 21 07:39:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 07:39:56 2012] Updating source flux to 2.1e-13