[Mon Feb 20 10:42:00 2012] Detection parameters:
  Position = (368.4, 398.2) = 15 9 9.55 7 39 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.3 +/- 12.9
  Background counts = 41.4
  Rate = 0.002 +/- 0.0005

[Mon Feb 20 10:42:01 2012] Off-axis axis estimate = 8.83'
[Mon Feb 20 16:38:42 2012] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 16:38:42 2012] Initial guess for spatial extent in simple fitting = 10.85"
[Mon Feb 20 16:38:42 2012] source mask rpix=2.5, npix_max = 35, mask sum = 35, frac = 0.977
[Mon Feb 20 16:38:42 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 10.85"
[Mon Feb 20 18:32:46 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_src14.ximg exists
[Mon Feb 20 18:32:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_src14.csv
[Mon Feb 20 18:32:46 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_src14_1.ximg exists
[Mon Feb 20 18:32:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_src14.csv
[Mon Feb 20 18:32:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 18:32:47 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Mon Feb 20 18:32:47 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Mon Feb 20 18:32:47 2012] Fit fullrun_mos2_xmm0556020101_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Mon Feb 20 18:33:28 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 11.255016 pixels away
[Mon Feb 20 18:33:29 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 18:33:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 18:33:29 2012] Assessing source extent using major
[Mon Feb 20 18:33:29 2012] Source does appear to be extended
[Mon Feb 20 18:33:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 00:13:33 2012] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 00:13:33 2012] Initial guess for spatial extent in simple fitting = 10.85"
[Tue Feb 21 00:13:33 2012] source mask rpix=2.5, npix_max = 35, mask sum = 35, frac = 0.977
[Tue Feb 21 00:13:33 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 10.85"
[Tue Feb 21 01:48:30 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_src13.ximg exists
[Tue Feb 21 01:48:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_src13.csv
[Tue Feb 21 01:48:30 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Feb 21 01:48:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_src13.csv
[Tue Feb 21 01:48:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 01:48:31 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Feb 21 01:48:31 2012] fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Feb 21 01:48:31 2012] Fit fullrun_mos2_xmm0556020101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Tue Feb 21 01:49:07 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 19.114228 pixels away
[Tue Feb 21 01:49:07 2012] Spatial fit model total counts = 443.371000, observed total counts = 442.000000
[Tue Feb 21 01:49:07 2012] Offset between fit and detection position for source 10 = 0.175318 pixels
[Tue Feb 21 01:49:07 2012] 456.574100 total counts/ 415.721000 bgd. counts: snr = 2.003660
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.175318 pixels
  Position = (368.3, 398.3) = 15 9 9.58 7 38 59.1
  Extent = 4.2 (2.7-6.4)", rotation angle = 0
  Source counts = 40.9 +/- 21.4
  Background counts = 415.7
  Rate = 0.0009 +/- 0.0005
[Tue Feb 21 01:49:07 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 01:49:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 01:49:07 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 01:49:07 2012] Source does appear to be extended
[Tue Feb 21 01:49:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 06:12:14 2012] XMMSAS src. selection expression = ellipse(31993.152800, 34607.756200, 252.854407, 252.854407, 0.000000, X, Y)
[Tue Feb 21 06:12:14 2012] Writing source region out to fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src10_src.reg
[Tue Feb 21 06:12:14 2012] Extracting stamp from image fullrun_mos2_xmm0556020101_pi300-10000_cl_sm2.00.img.gz, (354, 384) - (383, 413)
[Tue Feb 21 06:12:14 2012] XMMSAS bgd. selection expression = annulus(31993.152800, 34607.756200, 421.424012, 842.848024, X, Y) && !ellipse(33323.123444, 34393.102905, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 21 06:12:14 2012] Writing fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src10.gif
[Tue Feb 21 06:16:10 2012] Mean detx,y = (-7407.70, 4574.79) 
[Tue Feb 21 06:16:13 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 06:16:26 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 06:16:26 2012] Setting source spectrum file to fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Feb 21 06:16:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Feb 21 07:00:39 2012] Not generating rmf since there are only 40 counts
[Tue Feb 21 07:00:39 2012] rmf not generated due to insufficient counts
[Tue Feb 21 07:37:38 2012] Updating aperture counts using extracted products
[Tue Feb 21 07:37:38 2012] Error reading totcts from fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Feb 21 07:37:39 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 07:37:39 2012] Using photon index=1.80, rate=0.00089, arf fullrun_mos2_xmm0556020101_pi300-10000_pass1_cl_src10.arf
[Tue Feb 21 07:37:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 07:37:39 2012] Updating source flux to 2.3e-14
[Tue Feb 21 07:38:49 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting