[Mon Feb 20 10:41:18 2012] Detection parameters:
  Position = (218.3, 358.3) = 15 9 53.45 7 36 7.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.4 +/- 12.0
  Background counts = 34.3
  Rate = 0.002 +/- 0.0004

[Mon Feb 20 10:41:19 2012] Off-axis axis estimate = 7.25'
[Mon Feb 20 14:37:20 2012] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 14:37:20 2012] Initial guess for spatial extent in simple fitting = 10.05"
[Mon Feb 20 14:37:20 2012] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.791
[Mon Feb 20 14:37:20 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 10.05"
[Mon Feb 20 16:38:40 2012] fullrun_mos1_xmm0556020101_pi300-10000_cl_pass0_src25.ximg exists
[Mon Feb 20 16:38:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556020101_pi300-10000_cl_pass0_src25.csv
[Mon Feb 20 16:38:40 2012] fullrun_mos1_xmm0556020101_pi300-10000_cl_pass0_src25_1.ximg exists
[Mon Feb 20 16:38:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556020101_pi300-10000_cl_pass0_src25.csv
[Mon Feb 20 16:38:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556020101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556020101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 16:38:41 2012] fullrun_mos1_xmm0556020101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Mon Feb 20 16:38:41 2012] fullrun_mos1_xmm0556020101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Mon Feb 20 16:38:41 2012] Fit fullrun_mos1_xmm0556020101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Mon Feb 20 18:33:16 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 13.511859 pixels away
[Mon Feb 20 18:33:16 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 18:33:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 18:33:16 2012] Assessing source extent using major
[Mon Feb 20 18:33:16 2012] Source does appear to be extended
[Mon Feb 20 18:33:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 22:42:23 2012] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 22:42:23 2012] Initial guess for spatial extent in simple fitting = 10.05"
[Mon Feb 20 22:42:23 2012] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.791
[Mon Feb 20 22:42:23 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 10.05"
[Tue Feb 21 00:13:33 2012] fullrun_mos1_xmm0556020101_pi300-10000_cl_pass1_src23.ximg exists
[Tue Feb 21 00:13:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556020101_pi300-10000_cl_pass1_src23.csv
[Tue Feb 21 00:13:33 2012] fullrun_mos1_xmm0556020101_pi300-10000_cl_pass1_src23_1.ximg exists
[Tue Feb 21 00:13:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556020101_pi300-10000_cl_pass1_src23.csv
[Tue Feb 21 00:13:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556020101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556020101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 00:13:33 2012] fullrun_mos1_xmm0556020101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Tue Feb 21 00:13:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556020101_pi300-10000_cl_pass1_tfrozen_src23.csv
[Tue Feb 21 00:13:33 2012] fullrun_mos1_xmm0556020101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Tue Feb 21 00:13:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556020101_pi300-10000_cl_pass1_tfrozen_src23.csv
[Tue Feb 21 00:13:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556020101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556020101_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 01:48:59 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 91.822085 pixels away
[Tue Feb 21 01:48:59 2012] Spatial fit model total counts = 278.008000, observed total counts = 321.000000
[Tue Feb 21 01:48:59 2012] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Feb 21 01:48:59 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 01:48:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 01:48:59 2012] Assessing source extent using major
[Tue Feb 21 01:48:59 2012] Source does appear to be extended
[Tue Feb 21 01:48:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 05:04:40 2012] XMMSAS src. selection expression = ellipse(18946.942947, 31126.577881, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Feb 21 05:04:40 2012] Writing source region out to fullrun_mos1_xmm0556020101_pi300-10000_pass1_cl_src31_src.reg
[Tue Feb 21 05:04:40 2012] Extracting stamp from image fullrun_mos1_xmm0556020101_pi300-10000_cl_sm2.00.img.gz, (181, 321) - (256, 396)
[Tue Feb 21 05:04:40 2012] XMMSAS bgd. selection expression = annulus(18946.942947, 31126.577881, 1087.500000, 2175.000000, X, Y)
[Tue Feb 21 05:04:40 2012] Writing fullrun_mos1_xmm0556020101_pi300-10000_pass1_cl_src31.gif
[Tue Feb 21 05:13:33 2012] Mean detx,y = (5816.35, -6093.26) 
[Tue Feb 21 05:13:35 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 05:14:14 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 05:14:14 2012] Setting source spectrum file to fullrun_mos1_xmm0556020101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Tue Feb 21 05:14:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0556020101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Tue Feb 21 05:57:38 2012] Not generating rmf since there are only 56 counts
[Tue Feb 21 05:57:38 2012] rmf not generated due to insufficient counts
[Tue Feb 21 07:37:37 2012] Updating aperture counts using extracted products
[Tue Feb 21 07:37:37 2012] Error reading totcts from fullrun_mos1_xmm0556020101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Tue Feb 21 07:37:38 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 07:37:38 2012] Using photon index=1.80, rate=0.00201, arf fullrun_mos1_xmm0556020101_pi300-10000_pass1_cl_src31.arf
[Tue Feb 21 07:37:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 07:37:38 2012] Updating source flux to 3.3e-14
[Tue Feb 21 07:37:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting