[Fri Mar 30 22:48:14 2012] Detection parameters:
  Position = (180.8, 298.7) = 14 58 32.99 -11 44 59.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2268.3 +/- 58.0
  Background counts = 51.9
  Rate = 0.03 +/- 0.0008

[Fri Mar 30 22:48:16 2012] Off-axis axis estimate = 8.53'
[Sat Mar 31 00:38:27 2012] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Sat Mar 31 00:38:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 31 00:38:27 2012] Initial guess for spatial extent in simple fitting = 10.69"
[Sat Mar 31 00:38:27 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.028
[Sat Mar 31 00:38:27 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.69"
[Sat Mar 31 01:29:50 2012] fullrun_mos2_xmm0555970401_pi300-10000_cl_pass0_src1.ximg exists
[Sat Mar 31 01:29:50 2012] fullrun_mos2_xmm0555970401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Mar 31 01:29:50 2012] Fit fullrun_mos2_xmm0555970401_pi300-10000_cl_pass0_src1 appears to have run properly
[Sat Mar 31 01:29:51 2012] fullrun_mos2_xmm0555970401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Mar 31 01:29:51 2012] fullrun_mos2_xmm0555970401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Mar 31 01:29:51 2012] Fit fullrun_mos2_xmm0555970401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Mar 31 01:30:16 2012] Spatial fit model total counts = 2718.890000, observed total counts = 2722.000000
[Sat Mar 31 01:30:16 2012] Offset between fit and detection position for source 1 = 0.264936 pixels
[Sat Mar 31 01:30:16 2012] 2729.130000 total counts/ 1147.750000 bgd. counts: snr = 46.678038
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.264936 pixels
  Position = (180.9, 298.5) = 14 58 32.96 -11 45 1.5
  Extent = 6.2 (5.9-6.6)", rotation angle = 0
  Source counts = 1581.4 +/- 52.2
  Background counts = 1147.8
  Rate = 0.02 +/- 0.0008
[Sat Mar 31 01:30:16 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 01:30:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 01:30:16 2012] Assessing source extent using major axis lower bound
[Sat Mar 31 01:30:16 2012] Source does appear to be extended
[Sat Mar 31 01:30:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 03:29:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 31 03:29:55 2012] Initial guess for spatial extent in simple fitting = 6.23"
[Sat Mar 31 03:29:55 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.803
[Sat Mar 31 03:29:55 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.23"
[Sat Mar 31 04:12:55 2012] fullrun_mos2_xmm0555970401_pi300-10000_cl_pass1_src1.ximg exists
[Sat Mar 31 04:12:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555970401_pi300-10000_cl_pass1_src1.csv
[Sat Mar 31 04:12:55 2012] fullrun_mos2_xmm0555970401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Mar 31 04:12:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555970401_pi300-10000_cl_pass1_src1.csv
[Sat Mar 31 04:12:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555970401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555970401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 04:12:55 2012] fullrun_mos2_xmm0555970401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Mar 31 04:12:55 2012] fullrun_mos2_xmm0555970401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Mar 31 04:12:55 2012] Fit fullrun_mos2_xmm0555970401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Mar 31 04:13:21 2012] Spatial fit model total counts = 2446.000000, observed total counts = 2446.000000
[Sat Mar 31 04:13:21 2012] Offset between fit and detection position for source 1 = 0.028246 pixels
[Sat Mar 31 04:13:21 2012] 2456.178000 total counts/ 973.628000 bgd. counts: snr = 47.513040
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.028246 pixels
  Position = (180.9, 298.5) = 14 58 32.96 -11 45 1.6
  Extent = 5.7 (5.4-6.1)", rotation angle = 0
  Source counts = 1482.5 +/- 49.6
  Background counts = 973.6
  Rate = 0.02 +/- 0.0007
[Sat Mar 31 04:13:21 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 04:13:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 04:13:21 2012] Assessing source extent using major axis lower bound
[Sat Mar 31 04:13:21 2012] Source does appear to be extended
[Sat Mar 31 04:13:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 05:55:17 2012] Counts = 1482.550000, rescaling region sizes by 2.000000
[Sat Mar 31 05:55:17 2012] XMMSAS src. selection expression = ellipse(15689.671980, 25918.483400, 685.221620, 685.221620, 0.000000, X, Y)
[Sat Mar 31 05:55:17 2012] Writing source region out to fullrun_mos2_xmm0555970401_pi300-10000_pass1_cl_src1_src.reg
[Sat Mar 31 05:55:17 2012] Extracting stamp from image fullrun_mos2_xmm0555970401_pi300-10000_cl_sm2.00.img.gz, (142, 259) - (220, 338)
[Sat Mar 31 05:55:17 2012] XMMSAS bgd. selection expression = annulus(15689.671980, 25918.483400, 2284.072066, 4568.144131, X, Y) && !ellipse(18483.849233, 31003.630572, 535.712168, 393.059199, 332.473734, X, Y) && !ellipse(19993.119400, 22443.206200, 469.945044, 469.945044, 0.000000, X, Y) && !ellipse(20321.814026, 24326.771729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13848.303200, 25209.245400, 615.996018, 172.180005, 96.251872, X, Y)
[Sat Mar 31 05:55:17 2012] Writing fullrun_mos2_xmm0555970401_pi300-10000_pass1_cl_src1.gif
[Sat Mar 31 05:55:26 2012] Mean detx,y = (11084.52, 970.59) 
[Sat Mar 31 05:55:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 05:55:53 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 05:55:53 2012] Setting source spectrum file to fullrun_mos2_xmm0555970401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Mar 31 05:55:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0555970401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Mar 31 06:43:44 2012] Updating aperture counts using extracted products
[Sat Mar 31 06:43:44 2012] Error reading totcts from fullrun_mos2_xmm0555970401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Mar 31 06:43:45 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 06:43:45 2012] Using photon index=1.80, rate=0.0214, arf fullrun_mos2_xmm0555970401_pi300-10000_pass1_cl_src1.arf
[Sat Mar 31 06:43:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 06:43:45 2012] Updating source flux to 4.9e-13
[Sat Mar 31 06:45:12 2012] Reading fit data from xmm0555970401/analysis//spectral/fullrun_mos2_xmm0555970401_pi300-10000_pass1_cl_src1_pl.csv
[Sat Mar 31 06:45:12 2012] Spectral fit parameter nH value = 3.63538e+20
[Sat Mar 31 06:45:12 2012] Spectral fit parameter PhoIndex value = 2.33712
[Sat Mar 31 06:45:12 2012] Failed to get F(0.3-8.0) from xmm0555970401/analysis//spectral/fullrun_mos2_xmm0555970401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Mar 31 06:45:12 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 06:45:12 2012] Using Nh = 3.6e+20, photon index=2.34, rate=0.0214, arf fullrun_mos2_xmm0555970401_pi300-10000_pass1_cl_src1.arf
[Sat Mar 31 06:45:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 06:45:12 2012] Updating source flux to 4.1e-13