[Fri Mar 30 22:47:25 2012] Detection parameters:
  Position = (320.9, 411.2) = 14 57 51.49 -11 36 50.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 181.6 +/- 19.9
  Background counts = 96.4
  Rate = 0.004 +/- 0.0004

[Fri Mar 30 22:47:27 2012] Off-axis axis estimate = 8.33'
[Fri Mar 30 23:54:45 2012] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 23:54:45 2012] Initial guess for spatial extent in simple fitting = 10.59"
[Fri Mar 30 23:54:45 2012] source mask rpix=2.4, npix_max = 34, mask sum = 33, frac = 0.957
[Fri Mar 30 23:54:45 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.59"
[Sat Mar 31 00:38:27 2012] fullrun_mos1_xmm0555970401_pi300-10000_cl_pass0_src7.ximg exists
[Sat Mar 31 00:38:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555970401_pi300-10000_cl_pass0_src7.csv
[Sat Mar 31 00:38:27 2012] fullrun_mos1_xmm0555970401_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat Mar 31 00:38:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555970401_pi300-10000_cl_pass0_src7.csv
[Sat Mar 31 00:38:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555970401_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555970401_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 00:38:27 2012] fullrun_mos1_xmm0555970401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat Mar 31 00:38:27 2012] fullrun_mos1_xmm0555970401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Mar 31 00:38:27 2012] Fit fullrun_mos1_xmm0555970401_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sat Mar 31 01:30:08 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 14.317379 pixels away
[Sat Mar 31 01:30:08 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 01:30:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 01:30:08 2012] Assessing source extent using major
[Sat Mar 31 01:30:08 2012] Source does appear to be extended
[Sat Mar 31 01:30:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 02:35:55 2012] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Sat Mar 31 02:35:55 2012] Initial guess for spatial extent in simple fitting = 10.59"
[Sat Mar 31 02:35:55 2012] source mask rpix=2.4, npix_max = 34, mask sum = 33, frac = 0.957
[Sat Mar 31 02:35:55 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 10.59"
[Sat Mar 31 03:29:54 2012] fullrun_mos1_xmm0555970401_pi300-10000_cl_pass1_src7.ximg exists
[Sat Mar 31 03:29:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555970401_pi300-10000_cl_pass1_src7.csv
[Sat Mar 31 03:29:54 2012] fullrun_mos1_xmm0555970401_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat Mar 31 03:29:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555970401_pi300-10000_cl_pass1_src7.csv
[Sat Mar 31 03:29:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555970401_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555970401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 03:29:54 2012] fullrun_mos1_xmm0555970401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat Mar 31 03:29:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555970401_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sat Mar 31 03:29:54 2012] fullrun_mos1_xmm0555970401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Mar 31 03:29:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555970401_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sat Mar 31 03:29:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555970401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555970401_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 04:13:14 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 12.685041 pixels away
[Sat Mar 31 04:13:14 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 04:13:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 04:13:14 2012] Assessing source extent using major
[Sat Mar 31 04:13:14 2012] Source does appear to be extended
[Sat Mar 31 04:13:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 05:25:55 2012] XMMSAS src. selection expression = ellipse(27868.981720, 35721.554779, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 31 05:25:55 2012] Writing source region out to fullrun_mos1_xmm0555970401_pi300-10000_pass1_cl_src7_src.reg
[Sat Mar 31 05:25:55 2012] Extracting stamp from image fullrun_mos1_xmm0555970401_pi300-10000_cl_sm2.00.img.gz, (283, 374) - (358, 449)
[Sat Mar 31 05:25:55 2012] XMMSAS bgd. selection expression = annulus(27868.981720, 35721.554779, 1087.500000, 2175.000000, X, Y)
[Sat Mar 31 05:25:55 2012] Writing fullrun_mos1_xmm0555970401_pi300-10000_pass1_cl_src7.gif
[Sat Mar 31 05:34:30 2012] Mean detx,y = (7547.91, 2995.56) 
[Sat Mar 31 05:34:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 05:35:13 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 05:35:13 2012] Setting source spectrum file to fullrun_mos1_xmm0555970401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Mar 31 05:35:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0555970401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Mar 31 05:48:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 05:48:05 2012] rmf not generated due to insufficient counts
[Sat Mar 31 06:43:42 2012] Updating aperture counts using extracted products
[Sat Mar 31 06:43:42 2012] Error reading totcts from fullrun_mos1_xmm0555970401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Mar 31 06:43:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 06:43:43 2012] Using photon index=1.80, rate=0.00366, arf fullrun_mos1_xmm0555970401_pi300-10000_pass1_cl_src7.arf
[Sat Mar 31 06:43:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 06:43:43 2012] Updating source flux to 4.9e-14
[Sat Mar 31 06:43:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting