[Fri Mar 30 22:47:26 2012] Detection parameters:
  Position = (387.7, 489.3) = 14 57 31.73 -11 31 10.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 259.1 +/- 23.2
  Background counts = 72.2
  Rate = 0.003 +/- 0.0003

[Fri Mar 30 22:47:27 2012] Off-axis axis estimate = 15.27'
[Fri Mar 30 23:54:45 2012] Using EEF radius (= 14.07 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 23:54:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 30 23:54:45 2012] Initial guess for spatial extent in simple fitting = 14.07"
[Fri Mar 30 23:54:45 2012] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.879
[Fri Mar 30 23:54:45 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 14.07"
[Sat Mar 31 00:38:27 2012] fullrun_mos1_xmm0555970401_pi300-10000_cl_pass0_src8.ximg exists
[Sat Mar 31 00:38:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555970401_pi300-10000_cl_pass0_src8.csv
[Sat Mar 31 00:38:27 2012] fullrun_mos1_xmm0555970401_pi300-10000_cl_pass0_src8_1.ximg exists
[Sat Mar 31 00:38:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555970401_pi300-10000_cl_pass0_src8.csv
[Sat Mar 31 00:38:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555970401_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555970401_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 00:38:27 2012] fullrun_mos1_xmm0555970401_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sat Mar 31 00:38:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555970401_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sat Mar 31 00:38:27 2012] fullrun_mos1_xmm0555970401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sat Mar 31 00:38:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555970401_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sat Mar 31 00:38:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555970401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555970401_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 01:30:08 2012] Spatial fit model total counts = 948.788000, observed total counts = 738.000000
[Sat Mar 31 01:30:08 2012] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Mar 31 01:30:08 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 01:30:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 01:30:08 2012] Assessing source extent using major
[Sat Mar 31 01:30:08 2012] Source does appear to be extended
[Sat Mar 31 01:30:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 02:35:55 2012] Using EEF radius (= 14.07 ")to estimate initial spatial extent for simple fitting
[Sat Mar 31 02:35:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 31 02:35:55 2012] Initial guess for spatial extent in simple fitting = 14.07"
[Sat Mar 31 02:35:55 2012] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.879
[Sat Mar 31 02:35:55 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 14.07"
[Sat Mar 31 03:29:54 2012] fullrun_mos1_xmm0555970401_pi300-10000_cl_pass1_src8.ximg exists
[Sat Mar 31 03:29:54 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0555970401_pi300-10000_cl_pass1_src8.csv
[Sat Mar 31 03:29:54 2012] fullrun_mos1_xmm0555970401_pi300-10000_cl_pass1_src8_1.ximg exists
[Sat Mar 31 03:29:54 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0555970401_pi300-10000_cl_pass1_src8.csv
[Sat Mar 31 03:29:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555970401_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555970401_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 03:29:54 2012] fullrun_mos1_xmm0555970401_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sat Mar 31 03:29:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555970401_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sat Mar 31 03:29:54 2012] fullrun_mos1_xmm0555970401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sat Mar 31 03:29:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555970401_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sat Mar 31 03:29:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555970401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555970401_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 04:13:14 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 13.258088 pixels away
[Sat Mar 31 04:13:14 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 04:13:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 04:13:14 2012] Assessing source extent using major
[Sat Mar 31 04:13:14 2012] Source does appear to be extended
[Sat Mar 31 04:13:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 05:25:55 2012] XMMSAS src. selection expression = ellipse(33678.857544, 42520.237854, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 31 05:25:55 2012] Writing source region out to fullrun_mos1_xmm0555970401_pi300-10000_pass1_cl_src22_src.reg
[Sat Mar 31 05:25:55 2012] Extracting stamp from image fullrun_mos1_xmm0555970401_pi300-10000_cl_sm2.00.img.gz, (350, 452) - (425, 527)
[Sat Mar 31 05:25:55 2012] XMMSAS bgd. selection expression = annulus(33678.857544, 42520.237854, 1087.500000, 2175.000000, X, Y)
[Sat Mar 31 05:25:55 2012] Writing fullrun_mos1_xmm0555970401_pi300-10000_pass1_cl_src22.gif
[Sat Mar 31 05:35:22 2012] Mean detx,y = (12624.06, 10393.48) 
[Sat Mar 31 05:35:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 05:35:54 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 05:35:55 2012] Setting source spectrum file to fullrun_mos1_xmm0555970401_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat Mar 31 05:35:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0555970401_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Sat Mar 31 05:48:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 31 05:48:18 2012] rmf not generated due to insufficient counts
[Sat Mar 31 06:43:42 2012] Updating aperture counts using extracted products
[Sat Mar 31 06:43:42 2012] Error reading totcts from fullrun_mos1_xmm0555970401_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat Mar 31 06:43:43 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 06:43:43 2012] Using photon index=1.80, rate=0.00347, arf fullrun_mos1_xmm0555970401_pi300-10000_pass1_cl_src22.arf
[Sat Mar 31 06:43:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 06:43:43 2012] Updating source flux to 8.3e-14
[Sat Mar 31 06:43:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting