[Sat May 19 10:20:20 2012] Detection parameters:
  Position = (225.1, 309.2) = 1 31 0.23 58 25 50.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 204.8 +/- 19.8
  Background counts = 48.3
  Rate = 0.01 +/- 0.001

[Sat May 19 10:20:20 2012] Off-axis axis estimate = 5.38'
[Sat May 19 10:23:38 2012] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Sat May 19 10:23:38 2012] Initial guess for spatial extent in simple fitting = 9.12"
[Sat May 19 10:23:38 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.113
[Sat May 19 10:23:38 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 9.12"
[Sat May 19 11:04:18 2012] fullrun_pn_xmm0555880101_pi300-10000_cl_pass0_src11.ximg exists
[Sat May 19 11:04:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555880101_pi300-10000_cl_pass0_src11.csv
[Sat May 19 11:04:18 2012] fullrun_pn_xmm0555880101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat May 19 11:04:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555880101_pi300-10000_cl_pass0_src11.csv
[Sat May 19 11:04:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555880101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555880101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 11:04:18 2012] fullrun_pn_xmm0555880101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat May 19 11:04:18 2012] fullrun_pn_xmm0555880101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat May 19 11:04:18 2012] Fit fullrun_pn_xmm0555880101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat May 19 11:58:54 2012] Spatial fit model total counts = 403.855000, observed total counts = 382.000000
[Sat May 19 11:58:54 2012] Offset between fit and detection position for source 11 = 0.135571 pixels
[Sat May 19 11:58:54 2012] 406.287000 total counts/ 285.301000 bgd. counts: snr = 7.162811
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.135571 pixels
  Position = (225.0, 309.3) = 1 31 0.30 58 25 50.2
  Extent = 5.0 (4.0-5.9)", rotation angle = 0
  Source counts = 121.0 +/- 20.2
  Background counts = 285.3
  Rate = 0.005 +/- 0.0009
[Sat May 19 11:58:54 2012] Vigneting correction estimate = 1.000000
[Sat May 19 11:58:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 11:58:54 2012] Assessing source extent using major axis lower bound
[Sat May 19 11:58:54 2012] Source does appear to be extended
[Sat May 19 11:58:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 11:59:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 19 11:59:16 2012] Initial guess for spatial extent in simple fitting = 4.99"
[Sat May 19 11:59:16 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.105
[Sat May 19 11:59:16 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 4.99"
[Sat May 19 12:33:37 2012] fullrun_pn_xmm0555880101_pi300-10000_cl_pass1_src11.ximg exists
[Sat May 19 12:33:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555880101_pi300-10000_cl_pass1_src11.csv
[Sat May 19 12:33:37 2012] fullrun_pn_xmm0555880101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat May 19 12:33:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555880101_pi300-10000_cl_pass1_src11.csv
[Sat May 19 12:33:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555880101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555880101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 12:33:38 2012] fullrun_pn_xmm0555880101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat May 19 12:33:38 2012] fullrun_pn_xmm0555880101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat May 19 12:33:38 2012] Fit fullrun_pn_xmm0555880101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat May 19 13:18:53 2012] Spatial fit model total counts = 403.792000, observed total counts = 382.000000
[Sat May 19 13:18:53 2012] Offset between fit and detection position for source 11 = 0.002269 pixels
[Sat May 19 13:18:53 2012] 406.218000 total counts/ 284.815000 bgd. counts: snr = 7.193628
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.002269 pixels
  Position = (224.9, 309.3) = 1 31 0.30 58 25 50.2
  Extent = 5.0 (4.0-5.9)", rotation angle = 0
  Source counts = 121.4 +/- 20.2
  Background counts = 284.8
  Rate = 0.005 +/- 0.0009
[Sat May 19 13:18:53 2012] Vigneting correction estimate = 1.000000
[Sat May 19 13:18:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 13:18:53 2012] Assessing source extent using major axis lower bound
[Sat May 19 13:18:53 2012] Source does appear to be extended
[Sat May 19 13:18:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 13:19:04 2012] XMMSAS src. selection expression = ellipse(19522.143540, 26859.222200, 301.436409, 301.436409, 0.000000, X, Y)
[Sat May 19 13:19:04 2012] Writing source region out to fullrun_pn_xmm0555880101_pi300-10000_pass1_cl_src11_src.reg
[Sat May 19 13:19:04 2012] Extracting stamp from image fullrun_pn_xmm0555880101_pi300-10000_cl_sm2.00.img.gz, (208, 292) - (242, 327)
[Sat May 19 13:19:04 2012] XMMSAS bgd. selection expression = annulus(19522.143540, 26859.222200, 502.394014, 1004.788029, X, Y)
[Sat May 19 13:19:04 2012] Writing fullrun_pn_xmm0555880101_pi300-10000_pass1_cl_src11.gif
[Sat May 19 13:25:08 2012] Mean detx,y = (3902.11, -2672.81) 
[Sat May 19 13:25:11 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 13:25:29 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 13:25:30 2012] Setting source spectrum file to fullrun_pn_xmm0555880101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat May 19 13:25:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555880101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat May 19 13:57:47 2012] Updating aperture counts using extracted products
[Sat May 19 13:57:47 2012] Error reading totcts from fullrun_pn_xmm0555880101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat May 19 13:57:48 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 13:57:48 2012] Using photon index=1.80, rate=0.00544, arf fullrun_pn_xmm0555880101_pi300-10000_pass1_cl_src11.arf
[Sat May 19 13:57:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 13:57:48 2012] Updating source flux to 2.2e-14
[Sat May 19 13:58:23 2012] Reading fit data from xmm0555880101/analysis//spectral/fullrun_pn_xmm0555880101_pi300-10000_pass1_cl_src11_pl.csv
[Sat May 19 13:58:23 2012] Spectral fit parameter nH value = 8.20568e+21
[Sat May 19 13:58:23 2012] Spectral fit parameter PhoIndex value = 6.44234
[Sat May 19 13:58:23 2012] Failed to get F(0.3-8.0) from xmm0555880101/analysis//spectral/fullrun_pn_xmm0555880101_pi300-10000_pass1_cl_src11_pl.csv, possibly due to different flux energy range selected
[Sat May 19 13:58:23 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 13:58:23 2012] Using Nh = 8.2e+21, photon index=6.44, rate=0.00544, arf fullrun_pn_xmm0555880101_pi300-10000_pass1_cl_src11.arf
[Sat May 19 13:58:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 13:58:24 2012] Updating source flux to 1.4e-14