[Sun Jun  3 13:06:33 2012] Detection parameters:
  Position = (316.3, 228.0) = 10 8 21.15 12 14 57.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.2 +/- 19.8
  Background counts = 105.6
  Rate = 0.002 +/- 0.0003

[Sun Jun  3 13:06:34 2012] Off-axis axis estimate = 5.27'
[Sun Jun  3 13:12:56 2012] Using EEF radius (= 9.06 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 13:12:56 2012] Initial guess for spatial extent in simple fitting = 9.06"
[Sun Jun  3 13:12:56 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.124
[Sun Jun  3 13:12:56 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 9.06"
[Sun Jun  3 14:52:35 2012] fullrun_pn_xmm0555870201_pi300-10000_cl_pass0_src47.ximg exists
[Sun Jun  3 14:52:35 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0555870201_pi300-10000_cl_pass0_src47.csv
[Sun Jun  3 14:52:35 2012] fullrun_pn_xmm0555870201_pi300-10000_cl_pass0_src47_1.ximg exists
[Sun Jun  3 14:52:35 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0555870201_pi300-10000_cl_pass0_src47.csv
[Sun Jun  3 14:52:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555870201_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555870201_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 14:52:35 2012] fullrun_pn_xmm0555870201_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Sun Jun  3 14:52:35 2012] fullrun_pn_xmm0555870201_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Sun Jun  3 14:52:35 2012] Fit fullrun_pn_xmm0555870201_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Sun Jun  3 16:43:31 2012] Spatial fit model total counts = 1642.960000, observed total counts = 1623.000000
[Sun Jun  3 16:43:31 2012] Offset between fit and detection position for source 48 = 9.665000 pixels
[Sun Jun  3 16:43:31 2012] 1474.226000 total counts/ 758.890000 bgd. counts: snr = 25.966934
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 9.665000 pixels
  Position = (310.0, 235.3) = 10 8 23.02 12 15 28.2
  Extent = 18.1 (18.1-36.3)", rotation angle = 0
  Source counts = 715.3 +/- 38.4
  Background counts = 758.9
  Rate = 0.009 +/- 0.0005
[Sun Jun  3 16:43:31 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 16:43:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 16:43:31 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 16:43:31 2012] Source does appear to be extended
[Sun Jun  3 16:43:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 16:44:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  3 16:44:00 2012] Initial guess for spatial extent in simple fitting = 18.13"
[Sun Jun  3 16:44:00 2012] source mask rpix=4.2, npix_max = 87, mask sum = 87, frac = 0.999
[Sun Jun  3 16:44:00 2012] Giving source the simple spatial ID 47 for pass 1, mean size = 18.13"
[Sun Jun  3 18:30:19 2012] fullrun_pn_xmm0555870201_pi300-10000_cl_pass1_src47.ximg exists
[Sun Jun  3 18:30:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555870201_pi300-10000_cl_pass1_src47.csv
[Sun Jun  3 18:30:19 2012] fullrun_pn_xmm0555870201_pi300-10000_cl_pass1_src47_1.ximg exists
[Sun Jun  3 18:30:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555870201_pi300-10000_cl_pass1_src47.csv
[Sun Jun  3 18:30:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555870201_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555870201_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 18:30:20 2012] fullrun_pn_xmm0555870201_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Sun Jun  3 18:30:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555870201_pi300-10000_cl_pass1_tfrozen_src47.csv
[Sun Jun  3 18:30:20 2012] fullrun_pn_xmm0555870201_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Sun Jun  3 18:30:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555870201_pi300-10000_cl_pass1_tfrozen_src47.csv
[Sun Jun  3 18:30:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555870201_pi300-10000_cl_pass1_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555870201_pi300-10000_cl_pass1_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 20:23:01 2012] Warning: source 47 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 12.078509 pixels away
[Sun Jun  3 20:23:01 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 20:23:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 20:23:01 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 20:23:01 2012] Source does appear to be extended
[Sun Jun  3 20:23:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 20:23:28 2012] XMMSAS src. selection expression = ellipse(26917.570000, 20423.302000, 1087.548031, 1087.548031, 0.000000, X, Y)
[Sun Jun  3 20:23:28 2012] Writing source region out to fullrun_pn_xmm0555870201_pi300-10000_pass1_cl_src48_src.reg
[Sun Jun  3 20:23:28 2012] Extracting stamp from image fullrun_pn_xmm0555870201_pi300-10000_cl_sm2.00.img.gz, (247, 173) - (372, 298)
[Sun Jun  3 20:23:28 2012] XMMSAS bgd. selection expression = annulus(26917.570000, 20423.302000, 1812.580052, 3625.160104, X, Y) && !ellipse(27770.847600, 19143.105200, 467.333613, 467.333613, 0.000000, X, Y) && !ellipse(31115.105499, 20110.978149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29667.073761, 23797.231445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29424.813400, 16766.368000, 1414.864041, 1081.888031, 41.159200, X, Y) && !ellipse(26756.553650, 23105.506042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23094.344299, 23541.650360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29324.282928, 23135.207855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24575.237335, 16051.837936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22816.697266, 17700.215530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29263.533203, 17161.689301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24448.093292, 16625.608353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30244.266000, 16245.146000, 1710.040049, 1710.040049, 0.000000, X, Y)
[Sun Jun  3 20:23:28 2012] Writing fullrun_pn_xmm0555870201_pi300-10000_pass1_cl_src48.gif
[Sun Jun  3 21:23:08 2012] Mean detx,y = (-139.28, -4023.88) 
[Sun Jun  3 21:23:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  3 21:24:15 2012] Binned source spectrum to 10 counts/bin
[Sun Jun  3 21:24:15 2012] Setting source spectrum file to fullrun_pn_xmm0555870201_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Sun Jun  3 21:24:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555870201_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Mon Jun  4 00:08:50 2012] Updating aperture counts using extracted products
[Mon Jun  4 00:08:50 2012] Error reading totcts from fullrun_pn_xmm0555870201_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Mon Jun  4 00:08:53 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun  4 00:08:53 2012] Using photon index=1.80, rate=0.00901, arf fullrun_pn_xmm0555870201_pi300-10000_pass1_cl_src48.arf
[Mon Jun  4 00:08:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  4 00:08:53 2012] Updating source flux to 2.6e-14