[Sun Jun  3 13:07:29 2012] Detection parameters:
  Position = (433.7, 301.2) = 10 7 46.30 12 20 14.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.8 +/- 15.3
  Background counts = 61.3
  Rate = 0.0009 +/- 0.0002

[Sun Jun  3 13:07:30 2012] Off-axis axis estimate = 9.81'
[Sun Jun  3 15:33:31 2012] Using EEF radius (= 11.33 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 15:33:31 2012] Initial guess for spatial extent in simple fitting = 11.33"
[Sun Jun  3 15:33:31 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.934
[Sun Jun  3 15:33:31 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 11.33"
[Sun Jun  3 16:43:17 2012] fullrun_mos2_xmm0555870201_pi300-10000_cl_pass0_src42.ximg exists
[Sun Jun  3 16:43:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555870201_pi300-10000_cl_pass0_src42.csv
[Sun Jun  3 16:43:17 2012] fullrun_mos2_xmm0555870201_pi300-10000_cl_pass0_src42_1.ximg exists
[Sun Jun  3 16:43:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555870201_pi300-10000_cl_pass0_src42.csv
[Sun Jun  3 16:43:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555870201_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555870201_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 16:43:18 2012] fullrun_mos2_xmm0555870201_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Sun Jun  3 16:43:18 2012] fullrun_mos2_xmm0555870201_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Sun Jun  3 16:43:18 2012] Fit fullrun_mos2_xmm0555870201_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Sun Jun  3 16:43:45 2012] Source 26 is offset by 4.295653 and 1.846691 pixels which is larger than
2 X fitted extent = 1.340290 x 1.340290, not incorporating fit results
[Sun Jun  3 16:43:45 2012] Spatial fit model total counts = 373.322000, observed total counts = 373.000000
[Sun Jun  3 16:43:45 2012] Offset between fit and detection position for source 26 = 0.316166 pixels
[Sun Jun  3 16:43:45 2012] 379.916000 total counts/ 331.523000 bgd. counts: snr = 2.657821
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.316166 pixels
  Position = (433.4, 301.4) = 10 7 46.38 12 20 15.5
  Extent = 4.6 (3.4-6.9)", rotation angle = 0
  Source counts = 48.4 +/- 19.5
  Background counts = 331.5
  Rate = 0.0006 +/- 0.0002
[Sun Jun  3 16:43:45 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 16:43:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 16:43:45 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 16:43:45 2012] Source does appear to be extended
[Sun Jun  3 16:43:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 19:15:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  3 19:15:22 2012] Initial guess for spatial extent in simple fitting = 4.62"
[Sun Jun  3 19:15:22 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.921
[Sun Jun  3 19:15:22 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 4.62"
[Sun Jun  3 20:22:47 2012] fullrun_mos2_xmm0555870201_pi300-10000_cl_pass1_src40.ximg exists
[Sun Jun  3 20:22:47 2012] fullrun_mos2_xmm0555870201_pi300-10000_cl_pass1_src40_1.ximg exists
[Sun Jun  3 20:22:47 2012] Fit fullrun_mos2_xmm0555870201_pi300-10000_cl_pass1_src40 appears to have run properly
[Sun Jun  3 20:22:48 2012] fullrun_mos2_xmm0555870201_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Sun Jun  3 20:22:48 2012] fullrun_mos2_xmm0555870201_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Sun Jun  3 20:22:48 2012] Fit fullrun_mos2_xmm0555870201_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Sun Jun  3 20:23:13 2012] Spatial fit model total counts = 374.517000, observed total counts = 373.000000
[Sun Jun  3 20:23:13 2012] Offset between fit and detection position for source 26 = 0.011810 pixels
[Sun Jun  3 20:23:13 2012] 381.162000 total counts/ 332.427000 bgd. counts: snr = 2.672962
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.011810 pixels
  Position = (433.4, 301.4) = 10 7 46.37 12 20 15.4
  Extent = 4.5 (3.4-6.9)", rotation angle = 0
  Source counts = 48.7 +/- 19.5
  Background counts = 332.4
  Rate = 0.0006 +/- 0.0002
[Sun Jun  3 20:23:13 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 20:23:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 20:23:13 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 20:23:13 2012] Source does appear to be extended
[Sun Jun  3 20:23:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 23:19:07 2012] XMMSAS src. selection expression = ellipse(37658.179600, 26172.068800, 268.312208, 268.312208, 0.000000, X, Y)
[Sun Jun  3 23:19:07 2012] Writing source region out to fullrun_mos2_xmm0555870201_pi300-10000_pass1_cl_src26_src.reg
[Sun Jun  3 23:19:07 2012] Extracting stamp from image fullrun_mos2_xmm0555870201_pi300-10000_cl_sm2.00.img.gz, (418, 286) - (449, 317)
[Sun Jun  3 23:19:07 2012] XMMSAS bgd. selection expression = annulus(37658.179600, 26172.068800, 447.187013, 894.374026, X, Y) && !ellipse(38251.641052, 26868.951660, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  3 23:19:07 2012] Writing fullrun_mos2_xmm0555870201_pi300-10000_pass1_cl_src26.gif
[Sun Jun  3 23:32:19 2012] Mean detx,y = (12289.55, 2196.11) 
[Sun Jun  3 23:32:21 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  3 23:32:28 2012] Binned source spectrum to 10 counts/bin
[Sun Jun  3 23:32:28 2012] Setting source spectrum file to fullrun_mos2_xmm0555870201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Jun  3 23:32:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0555870201_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Mon Jun  4 00:05:46 2012] Not generating rmf since there are only 48 counts
[Mon Jun  4 00:05:46 2012] rmf not generated due to insufficient counts
[Mon Jun  4 00:08:59 2012] Updating aperture counts using extracted products
[Mon Jun  4 00:08:59 2012] Error reading totcts from fullrun_mos2_xmm0555870201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Jun  4 00:09:01 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun  4 00:09:01 2012] Using photon index=1.80, rate=0.000597, arf fullrun_mos2_xmm0555870201_pi300-10000_pass1_cl_src26.arf
[Mon Jun  4 00:09:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  4 00:09:01 2012] Updating source flux to 2e-14
[Mon Jun  4 00:10:16 2012] Flag b found in src. 26 procflags, skipping spectral fitting
[Mon Jun  4 00:10:16 2012] Source 26 has fewer than 100.000000 counts, skipping spectral fitting