[Sun Jun  3 13:06:59 2012] Detection parameters:
  Position = (381.0, 196.7) = 10 8 1.93 12 12 39.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 860.7 +/- 37.4
  Background counts = 66.2
  Rate = 0.02 +/- 0.0009

[Sun Jun  3 13:06:59 2012] Off-axis axis estimate = 9.50'
[Sun Jun  3 14:52:36 2012] Using EEF radius (= 11.18 ")to estimate initial spatial extent for simple fitting
[Sun Jun  3 14:52:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  3 14:52:36 2012] Initial guess for spatial extent in simple fitting = 11.18"
[Sun Jun  3 14:52:36 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.955
[Sun Jun  3 14:52:36 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.18"
[Sun Jun  3 15:33:30 2012] fullrun_mos1_xmm0555870201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun  3 15:33:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555870201_pi300-10000_cl_pass0_src1.csv
[Sun Jun  3 15:33:30 2012] fullrun_mos1_xmm0555870201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun  3 15:33:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555870201_pi300-10000_cl_pass0_src1.csv
[Sun Jun  3 15:33:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555870201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555870201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  3 15:33:31 2012] fullrun_mos1_xmm0555870201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun  3 15:33:31 2012] fullrun_mos1_xmm0555870201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun  3 15:33:31 2012] Fit fullrun_mos1_xmm0555870201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jun  3 16:43:37 2012] Spatial fit model total counts = 1355.000000, observed total counts = 1355.000000
[Sun Jun  3 16:43:37 2012] Offset between fit and detection position for source 2 = 0.147979 pixels
[Sun Jun  3 16:43:37 2012] 1363.647000 total counts/ 727.318000 bgd. counts: snr = 23.594976
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.147979 pixels
  Position = (381.0, 196.6) = 10 8 1.93 12 12 39.7
  Extent = 6.7 (6.2-7.2)", rotation angle = 0
  Source counts = 636.3 +/- 36.9
  Background counts = 727.3
  Rate = 0.008 +/- 0.0005
[Sun Jun  3 16:43:37 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 16:43:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 16:43:37 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 16:43:37 2012] Source does appear to be extended
[Sun Jun  3 16:43:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 18:30:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  3 18:30:21 2012] Initial guess for spatial extent in simple fitting = 6.65"
[Sun Jun  3 18:30:21 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.971
[Sun Jun  3 18:30:21 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.65"
[Sun Jun  3 19:15:21 2012] fullrun_mos1_xmm0555870201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun  3 19:15:21 2012] fullrun_mos1_xmm0555870201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun  3 19:15:21 2012] Fit fullrun_mos1_xmm0555870201_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun Jun  3 19:15:22 2012] fullrun_mos1_xmm0555870201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun  3 19:15:22 2012] fullrun_mos1_xmm0555870201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun  3 19:15:22 2012] Fit fullrun_mos1_xmm0555870201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun  3 20:23:06 2012] Spatial fit model total counts = 1098.990000, observed total counts = 1099.000000
[Sun Jun  3 20:23:06 2012] Offset between fit and detection position for source 2 = 0.016267 pixels
[Sun Jun  3 20:23:06 2012] 1104.675000 total counts/ 492.412000 bgd. counts: snr = 27.591398
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.016267 pixels
  Position = (381.1, 196.6) = 10 8 1.93 12 12 39.6
  Extent = 6.4 (5.9-6.9)", rotation angle = 0
  Source counts = 612.3 +/- 33.2
  Background counts = 492.4
  Rate = 0.007 +/- 0.0004
[Sun Jun  3 20:23:06 2012] Vigneting correction estimate = 1.000000
[Sun Jun  3 20:23:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  3 20:23:06 2012] Assessing source extent using major axis lower bound
[Sun Jun  3 20:23:06 2012] Source does appear to be extended
[Sun Jun  3 20:23:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  3 22:32:54 2012] XMMSAS src. selection expression = ellipse(33103.321540, 17053.643400, 384.032411, 384.032411, 0.000000, X, Y)
[Sun Jun  3 22:32:54 2012] Writing source region out to fullrun_mos1_xmm0555870201_pi300-10000_pass1_cl_src2_src.reg
[Sun Jun  3 22:32:54 2012] Extracting stamp from image fullrun_mos1_xmm0555870201_pi300-10000_cl_sm2.00.img.gz, (359, 175) - (403, 219)
[Sun Jun  3 22:32:54 2012] XMMSAS bgd. selection expression = annulus(33103.321540, 17053.643400, 640.054018, 1280.108037, X, Y) && !ellipse(35211.502411, 18386.426437, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  3 22:32:54 2012] Writing fullrun_mos1_xmm0555870201_pi300-10000_pass1_cl_src2.gif
[Sun Jun  3 22:32:58 2012] Mean detx,y = (9413.54, -4979.62) 
[Sun Jun  3 22:32:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  3 22:33:09 2012] Binned source spectrum to 10 counts/bin
[Sun Jun  3 22:33:09 2012] Setting source spectrum file to fullrun_mos1_xmm0555870201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun  3 22:33:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0555870201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Jun  4 00:08:54 2012] Updating aperture counts using extracted products
[Mon Jun  4 00:08:54 2012] Error reading totcts from fullrun_mos1_xmm0555870201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Jun  4 00:08:56 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun  4 00:08:56 2012] Using photon index=1.80, rate=0.00749, arf fullrun_mos1_xmm0555870201_pi300-10000_pass1_cl_src2.arf
[Mon Jun  4 00:08:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  4 00:08:56 2012] Updating source flux to 1.6e-13
[Mon Jun  4 00:10:16 2012] Reading fit data from xmm0555870201/analysis//spectral/fullrun_mos1_xmm0555870201_pi300-10000_pass1_cl_src2_pl.csv
[Mon Jun  4 00:10:16 2012] Spectral fit parameter nH value = 1.65913e+12
[Mon Jun  4 00:10:16 2012] Spectral fit parameter PhoIndex value = 1.99598
[Mon Jun  4 00:10:16 2012] Failed to get F(0.3-8.0) from xmm0555870201/analysis//spectral/fullrun_mos1_xmm0555870201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Jun  4 00:10:16 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun  4 00:10:16 2012] Using Nh = 1.7e+12, photon index=2.00, rate=0.00749, arf fullrun_mos1_xmm0555870201_pi300-10000_pass1_cl_src2.arf
[Mon Jun  4 00:10:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  4 00:10:16 2012] Updating source flux to 1.5e-13