[Mon Jan 16 21:58:03 2012] Detection parameters: Position = (434.8, 252.3) = 3 31 44.74 -27 54 40.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 594.5 +/- 53.7 Background counts = 194.4 Rate = 0.005 +/- 0.0005 [Mon Jan 16 21:58:06 2012] Off-axis axis estimate = 10.44' [Mon Jan 16 22:03:07 2012] Using EEF radius (= 11.65 ")to estimate initial spatial extent for simple fitting [Mon Jan 16 22:03:07 2012] Initial guess for spatial extent in simple fitting = 11.65" [Mon Jan 16 22:03:07 2012] source mask rpix=2.7, npix_max = 40, mask sum = 17, frac = 0.421 [Mon Jan 16 22:03:07 2012] Skipping simple spatial due to low active detector fraction [Tue Jan 17 00:18:30 2012] Vigneting correction estimate = 1.000000 [Tue Jan 17 00:18:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jan 17 00:18:30 2012] Assessing source extent using major [Tue Jan 17 00:18:30 2012] Source does appear to be extended [Tue Jan 17 00:18:30 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Jan 17 00:18:49 2012] Using EEF radius (= 11.65 ")to estimate initial spatial extent for simple fitting [Tue Jan 17 00:18:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Tue Jan 17 00:18:49 2012] Initial guess for spatial extent in simple fitting = 11.65" [Tue Jan 17 00:18:49 2012] source mask rpix=2.7, npix_max = 40, mask sum = 17, frac = 0.421 [Tue Jan 17 00:18:49 2012] Skipping simple spatial due to low active detector fraction [Tue Jan 17 02:27:06 2012] Source 5 is offset by 2.151299 and -0.831532 pixels which is larger than 2 X fitted extent = 1.326009 x 1.326009, not incorporating fit results [Tue Jan 17 02:27:06 2012] Vigneting correction estimate = 1.000000 [Tue Jan 17 02:27:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jan 17 02:27:06 2012] Assessing source extent using major [Tue Jan 17 02:27:06 2012] Source does appear to be extended [Tue Jan 17 02:27:06 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Jan 17 02:27:23 2012] XMMSAS src. selection expression = ellipse(37777.713013, 21904.074753, 652.500000, 652.500000, 0.000000, X, Y) [Tue Jan 17 02:27:23 2012] Writing source region out to fullrun_pn_xmm0555782301_pi300-10000_pass1_cl_src5_src.reg [Tue Jan 17 02:27:23 2012] Extracting stamp from image fullrun_pn_xmm0555782301_pi300-10000_cl_sm2.00.img.gz, (397, 215) - (472, 290) [Tue Jan 17 02:27:23 2012] XMMSAS bgd. selection expression = annulus(37777.713013, 21904.074753, 1087.500000, 2175.000000, X, Y) && !ellipse(37150.512787, 23461.579987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37178.491486, 21076.560532, 870.000000, 870.000000, 0.000000, X, Y) [Tue Jan 17 02:27:23 2012] Writing fullrun_pn_xmm0555782301_pi300-10000_pass1_cl_src5.gif [Tue Jan 17 02:33:40 2012] Mean detx,y = (11236.57, -499.53) [Tue Jan 17 02:33:45 2012] Setting backscal keywords in source and bgd. spectrum [Tue Jan 17 02:34:01 2012] Binned source spectrum to 10 counts/bin [Tue Jan 17 02:34:01 2012] Setting source spectrum file to fullrun_pn_xmm0555782301_pi300-10000_pass1_cl_src5_src_b10.pi.gz [Tue Jan 17 02:34:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555782301_pi300-10000_pass1_cl_src5_bgd.pi.gz [Tue Jan 17 03:33:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Tue Jan 17 03:33:42 2012] rmf not generated due to insufficient counts [Tue Jan 17 06:03:30 2012] Updating aperture counts using extracted products [Tue Jan 17 06:03:30 2012] Error reading totcts from fullrun_pn_xmm0555782301_pi300-10000_pass1_cl_src5_src_b10.pi.gz [Tue Jan 17 06:03:31 2012] Calculating source flux in energy range 0.30-8.00 [Tue Jan 17 06:03:31 2012] Using photon index=1.80, rate=0.00514, arf fullrun_pn_xmm0555782301_pi300-10000_pass1_cl_src5.arf [Tue Jan 17 06:03:31 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue Jan 17 06:03:31 2012] Updating source flux to 2.4e-14 [Tue Jan 17 06:04:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting