[Mon Jan 16 21:58:08 2012] Detection parameters:
  Position = (308.3, 444.8) = 3 32 26.25 -27 40 34.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 299.8 +/- 23.1
  Background counts = 47.1
  Rate = 0.003 +/- 0.0002

[Mon Jan 16 21:58:09 2012] Off-axis axis estimate = 10.64'
[Mon Jan 16 23:33:48 2012] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 23:33:48 2012] Initial guess for spatial extent in simple fitting = 11.75"
[Mon Jan 16 23:33:48 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.025
[Mon Jan 16 23:33:48 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 11.75"
[Tue Jan 17 00:18:18 2012] fullrun_mos2_xmm0555782301_pi300-10000_cl_pass0_src9.ximg exists
[Tue Jan 17 00:18:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555782301_pi300-10000_cl_pass0_src9.csv
[Tue Jan 17 00:18:18 2012] fullrun_mos2_xmm0555782301_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Jan 17 00:18:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555782301_pi300-10000_cl_pass0_src9.csv
[Tue Jan 17 00:18:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555782301_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555782301_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 00:18:19 2012] fullrun_mos2_xmm0555782301_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Jan 17 00:18:19 2012] fullrun_mos2_xmm0555782301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Jan 17 00:18:19 2012] Fit fullrun_mos2_xmm0555782301_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Tue Jan 17 00:18:37 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 10.375287 pixels away
[Tue Jan 17 00:18:37 2012] Warning, spatial fit 9 centroid is now closest to src. 2
[Tue Jan 17 00:18:37 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 00:18:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 00:18:37 2012] Assessing source extent using major
[Tue Jan 17 00:18:37 2012] Source does appear to be extended
[Tue Jan 17 00:18:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 00:18:37 2012] Source is confused with source 2
[Tue Jan 17 01:43:35 2012] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 01:43:35 2012] Initial guess for spatial extent in simple fitting = 11.75"
[Tue Jan 17 01:43:35 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.025
[Tue Jan 17 01:43:35 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 11.75"
[Tue Jan 17 02:26:57 2012] fullrun_mos2_xmm0555782301_pi300-10000_cl_pass1_src9.ximg exists
[Tue Jan 17 02:26:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555782301_pi300-10000_cl_pass1_src9.csv
[Tue Jan 17 02:26:57 2012] fullrun_mos2_xmm0555782301_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Jan 17 02:26:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555782301_pi300-10000_cl_pass1_src9.csv
[Tue Jan 17 02:26:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555782301_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555782301_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 02:26:58 2012] fullrun_mos2_xmm0555782301_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Jan 17 02:26:58 2012] fullrun_mos2_xmm0555782301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Jan 17 02:26:58 2012] Fit fullrun_mos2_xmm0555782301_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Tue Jan 17 02:27:11 2012] Spatial fit model total counts = 1277.950000, observed total counts = 1347.000000
[Tue Jan 17 02:27:11 2012] Offset between fit and detection position for source 7 = 7.713040 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 7.713040 pixels
  Position = (310.8, 452.1) = 3 32 25.44 -27 40 3.7
  Extent = 23.5 (23.3-47.0)", rotation angle = 0
  Source counts = 1040.0 +/- 32.2
  Background counts = 0.0
  Rate = 0.01 +/- 0.0003
[Tue Jan 17 02:27:11 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 02:27:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 02:27:11 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 02:27:11 2012] Source does appear to be extended
[Tue Jan 17 02:27:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 05:18:39 2012] Counts = 1039.970000, rescaling region sizes by 2.000000
[Tue Jan 17 05:18:39 2012] XMMSAS src. selection expression = ellipse(26991.730000, 39287.548000, 2819.400081, 2819.400081, 0.000000, X, Y)
[Tue Jan 17 05:18:39 2012] Writing source region out to fullrun_mos2_xmm0555782301_pi300-10000_pass1_cl_src7_src.reg
[Tue Jan 17 05:18:39 2012] Extracting stamp from image fullrun_mos2_xmm0555782301_pi300-10000_cl_sm2.00.img.gz, (149, 290) - (473, 595)
[Tue Jan 17 05:18:39 2012] XMMSAS bgd. selection expression = annulus(26991.730000, 39287.548000, 9398.000270, 18796.000541, X, Y) && !ellipse(31484.032400, 30228.802400, 401.988012, 401.988012, 0.000000, X, Y) && !ellipse(26670.222200, 38124.828000, 546.842416, 546.842416, 0.000000, X, Y) && !ellipse(25819.408600, 32763.254800, 360.120010, 360.120010, 0.000000, X, Y) && !ellipse(30730.545746, 42427.253418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25756.201600, 33197.620000, 323.456809, 323.456809, 0.000000, X, Y) && !ellipse(23713.430756, 39649.853821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30892.368800, 34232.704200, 515.408815, 339.031210, 21.038893, X, Y) && !ellipse(17880.506622, 29959.188049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40205.836986, 25406.733259, 552.884481, 351.328232, 78.288931, X, Y) && !ellipse(37719.907715, 21746.387253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33766.000916, 35296.484589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33281.312000, 35220.861600, 1816.984052, 1816.984052, 0.000000, X, Y) && !ellipse(37150.374725, 23473.177155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35020.071921, 21523.177173, 504.749930, 387.763020, 279.419038, X, Y) && !ellipse(15832.183600, 25579.727400, 215.147206, 215.147206, 0.000000, X, Y) && !ellipse(17477.481140, 32477.884247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14530.539400, 20356.029200, 325.492009, 325.492009, 0.000000, X, Y) && !ellipse(23757.966400, 24681.675200, 300.816009, 300.816009, 0.000000, X, Y) && !ellipse(36169.434326, 37880.837006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22307.180180, 28242.350600, 278.804008, 278.804008, 0.000000, X, Y) && !ellipse(39192.673706, 36857.564819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22511.544128, 41463.546814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21078.912888, 36295.710175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43099.452400, 24765.095800, 354.446410, 354.446410, 0.000000, X, Y) && !ellipse(27133.532000, 20166.854000, 780.107222, 780.107222, 0.000000, X, Y) && !ellipse(21129.210000, 37247.658800, 323.066409, 323.066409, 0.000000, X, Y) && !ellipse(11844.254400, 20935.897200, 493.875431, 493.875431, 0.000000, X, Y) && !ellipse(26526.235168, 37262.916107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11044.722832, 28714.929810, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 17 05:18:39 2012] Writing fullrun_mos2_xmm0555782301_pi300-10000_pass1_cl_src7.gif
[Tue Jan 17 05:20:15 2012] Mean detx,y = (6555.81, 10341.27) 
[Tue Jan 17 05:20:17 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 05:23:38 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 05:23:38 2012] Setting source spectrum file to fullrun_mos2_xmm0555782301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Jan 17 05:23:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0555782301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Jan 17 06:03:33 2012] Updating aperture counts using extracted products
[Tue Jan 17 06:03:33 2012] Error reading totcts from fullrun_mos2_xmm0555782301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Jan 17 06:03:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 06:03:34 2012] Using photon index=1.80, rate=0.00961, arf fullrun_mos2_xmm0555782301_pi300-10000_pass1_cl_src7.arf
[Tue Jan 17 06:03:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 06:03:34 2012] Updating source flux to 1.8e-13
[Tue Jan 17 06:03:37 2012] Flag c found in src. 7 procflags, skipping spectral fitting