[Mon Jan 16 21:58:08 2012] Detection parameters:
  Position = (380.6, 406.7) = 3 32 2.56 -27 43 22.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.1 +/- 23.9
  Background counts = 52.8
  Rate = 0.002 +/- 0.0004

[Mon Jan 16 21:58:09 2012] Off-axis axis estimate = 9.86'
[Mon Jan 16 23:33:48 2012] Using EEF radius (= 11.36 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 23:33:48 2012] Initial guess for spatial extent in simple fitting = 11.36"
[Mon Jan 16 23:33:48 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.930
[Mon Jan 16 23:33:48 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 11.36"
[Tue Jan 17 00:18:18 2012] fullrun_mos2_xmm0555782301_pi300-10000_cl_pass0_src19.ximg exists
[Tue Jan 17 00:18:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555782301_pi300-10000_cl_pass0_src19.csv
[Tue Jan 17 00:18:18 2012] fullrun_mos2_xmm0555782301_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Jan 17 00:18:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555782301_pi300-10000_cl_pass0_src19.csv
[Tue Jan 17 00:18:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555782301_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555782301_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 00:18:19 2012] fullrun_mos2_xmm0555782301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Jan 17 00:18:19 2012] fullrun_mos2_xmm0555782301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Jan 17 00:18:19 2012] Fit fullrun_mos2_xmm0555782301_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue Jan 17 00:18:37 2012] Warning, spatial fit 19 centroid is now closest to src. 15
[Tue Jan 17 00:18:37 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 00:18:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 00:18:37 2012] Assessing source extent using major
[Tue Jan 17 00:18:37 2012] Source does appear to be extended
[Tue Jan 17 00:18:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 01:43:35 2012] Using EEF radius (= 11.36 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 01:43:35 2012] Initial guess for spatial extent in simple fitting = 11.36"
[Tue Jan 17 01:43:35 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.930
[Tue Jan 17 01:43:35 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 11.36"
[Tue Jan 17 02:26:57 2012] fullrun_mos2_xmm0555782301_pi300-10000_cl_pass1_src19.ximg exists
[Tue Jan 17 02:26:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555782301_pi300-10000_cl_pass1_src19.csv
[Tue Jan 17 02:26:57 2012] fullrun_mos2_xmm0555782301_pi300-10000_cl_pass1_src19_1.ximg exists
[Tue Jan 17 02:26:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555782301_pi300-10000_cl_pass1_src19.csv
[Tue Jan 17 02:26:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555782301_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555782301_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 02:26:58 2012] fullrun_mos2_xmm0555782301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Tue Jan 17 02:26:58 2012] fullrun_mos2_xmm0555782301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Tue Jan 17 02:26:58 2012] Fit fullrun_mos2_xmm0555782301_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Tue Jan 17 02:27:11 2012] Spatial fit model total counts = 457.130000, observed total counts = 457.000000
[Tue Jan 17 02:27:11 2012] Offset between fit and detection position for source 13 = 2.807226 pixels
[Tue Jan 17 02:27:11 2012] 420.456000 total counts/ 188.863000 bgd. counts: snr = 16.852021
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 2.807226 pixels
  Position = (383.1, 405.4) = 3 32 1.75 -27 43 26.9
  Extent = 22.7 (22.7-45.4)", rotation angle = 0
  Source counts = 231.6 +/- 20.5
  Background counts = 188.9
  Rate = 0.002 +/- 0.0002
[Tue Jan 17 02:27:11 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 02:27:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 02:27:11 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 02:27:11 2012] Source does appear to be extended
[Tue Jan 17 02:27:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 02:27:11 2012] Source is confused with source 15
[Tue Jan 17 05:18:39 2012] XMMSAS src. selection expression = ellipse(33281.312000, 35220.861600, 1362.738039, 1362.738039, 0.000000, X, Y)
[Tue Jan 17 05:18:39 2012] Writing source region out to fullrun_mos2_xmm0555782301_pi300-10000_pass1_cl_src13_src.reg
[Tue Jan 17 05:18:39 2012] Extracting stamp from image fullrun_mos2_xmm0555782301_pi300-10000_cl_sm2.00.img.gz, (305, 327) - (461, 484)
[Tue Jan 17 05:18:39 2012] XMMSAS bgd. selection expression = annulus(33281.312000, 35220.861600, 2271.230065, 4542.460131, X, Y) && !ellipse(30892.368800, 34232.704200, 515.408815, 339.031210, 21.038893, X, Y) && !ellipse(26991.730000, 39287.548000, 1879.600054, 1879.600054, 0.000000, X, Y) && !ellipse(33766.000916, 35296.484589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36169.434326, 37880.837006, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 17 05:18:39 2012] Writing fullrun_mos2_xmm0555782301_pi300-10000_pass1_cl_src13.gif
[Tue Jan 17 05:25:09 2012] Mean detx,y = (-865.05, 10094.24) 
[Tue Jan 17 05:25:10 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 05:25:40 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 05:25:40 2012] Setting source spectrum file to fullrun_mos2_xmm0555782301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Jan 17 05:25:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0555782301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue Jan 17 06:03:33 2012] Updating aperture counts using extracted products
[Tue Jan 17 06:03:33 2012] Error reading totcts from fullrun_mos2_xmm0555782301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Jan 17 06:03:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 06:03:34 2012] Using photon index=1.80, rate=0.00214, arf fullrun_mos2_xmm0555782301_pi300-10000_pass1_cl_src13.arf
[Tue Jan 17 06:03:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 06:03:34 2012] Updating source flux to 3.7e-14
[Tue Jan 17 06:03:37 2012] Flag c found in src. 13 procflags, skipping spectral fitting