[Mon Jan 16 17:54:42 2012] Detection parameters:
  Position = (257.4, 262.4) = 3 32 42.95 -27 53 18.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.1 +/- 20.7
  Background counts = 160.1
  Rate = 0.001 +/- 0.0002

[Mon Jan 16 17:54:42 2012] Off-axis axis estimate = 3.96'
[Mon Jan 16 20:17:53 2012] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 20:17:53 2012] Initial guess for spatial extent in simple fitting = 8.41"
[Mon Jan 16 20:17:53 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.056
[Mon Jan 16 20:17:53 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 8.41"
[Mon Jan 16 21:05:23 2012] fullrun_mos2_xmm0555780901_pi300-10000_cl_pass0_src29.ximg exists
[Mon Jan 16 21:05:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555780901_pi300-10000_cl_pass0_src29.csv
[Mon Jan 16 21:05:23 2012] fullrun_mos2_xmm0555780901_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon Jan 16 21:05:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555780901_pi300-10000_cl_pass0_src29.csv
[Mon Jan 16 21:05:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555780901_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555780901_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 21:05:23 2012] fullrun_mos2_xmm0555780901_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon Jan 16 21:05:23 2012] fullrun_mos2_xmm0555780901_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Jan 16 21:05:23 2012] Fit fullrun_mos2_xmm0555780901_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Mon Jan 16 21:05:48 2012] Source 35 is offset by -4.483263 and 4.093493 pixels which is larger than
2 X fitted extent = 0.966497 x 0.966497, not incorporating fit results
[Mon Jan 16 21:05:48 2012] Vigneting correction estimate = 1.000000
[Mon Jan 16 21:05:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 16 21:05:48 2012] Assessing source extent using major
[Mon Jan 16 21:05:48 2012] Source does appear to be extended
[Mon Jan 16 21:05:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 04:40:42 2012] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 04:40:42 2012] Initial guess for spatial extent in simple fitting = 8.41"
[Tue Jan 17 04:40:42 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.056
[Tue Jan 17 04:40:42 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 8.41"
[Tue Jan 17 05:17:22 2012] fullrun_mos2_xmm0555780901_pi300-10000_cl_pass1_src28.ximg exists
[Tue Jan 17 05:17:22 2012] fullrun_mos2_xmm0555780901_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue Jan 17 05:17:22 2012] Fit fullrun_mos2_xmm0555780901_pi300-10000_cl_pass1_src28 appears to have run properly
[Tue Jan 17 05:17:22 2012] fullrun_mos2_xmm0555780901_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue Jan 17 05:17:22 2012] fullrun_mos2_xmm0555780901_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue Jan 17 05:17:22 2012] Fit fullrun_mos2_xmm0555780901_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Tue Jan 17 05:17:39 2012] Source 35 is offset by -5.345631 and 6.517608 pixels which is larger than
2 X fitted extent = 4.820092 x 4.820092, not incorporating fit results
[Tue Jan 17 05:17:39 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 05:17:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 05:17:39 2012] Assessing source extent using major
[Tue Jan 17 05:17:39 2012] Source does appear to be extended
[Tue Jan 17 05:17:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 07:38:03 2012] XMMSAS src. selection expression = ellipse(22341.508087, 22783.843933, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 17 07:38:03 2012] Writing source region out to fullrun_mos2_xmm0555780901_pi300-10000_pass1_cl_src35_src.reg
[Tue Jan 17 07:38:03 2012] Extracting stamp from image fullrun_mos2_xmm0555780901_pi300-10000_cl_sm2.00.img.gz, (220, 225) - (295, 300)
[Tue Jan 17 07:38:03 2012] XMMSAS bgd. selection expression = annulus(22341.508087, 22783.843933, 1087.500000, 2175.000000, X, Y) && !ellipse(23715.235920, 24061.153600, 304.235193, 304.235193, 0.000000, X, Y)
[Tue Jan 17 07:38:03 2012] Writing fullrun_mos2_xmm0555780901_pi300-10000_pass1_cl_src35.gif
[Tue Jan 17 07:44:23 2012] Mean detx,y = (2830.60, -6033.83) 
[Tue Jan 17 07:44:23 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 07:44:32 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 07:44:32 2012] Setting source spectrum file to fullrun_mos2_xmm0555780901_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Tue Jan 17 07:44:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0555780901_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Tue Jan 17 08:08:21 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan 17 08:08:21 2012] rmf not generated due to insufficient counts
[Tue Jan 17 08:11:33 2012] Updating aperture counts using extracted products
[Tue Jan 17 08:11:33 2012] Error reading totcts from fullrun_mos2_xmm0555780901_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Tue Jan 17 08:11:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 08:11:34 2012] Using photon index=1.80, rate=0.0011, arf fullrun_mos2_xmm0555780901_pi300-10000_pass1_cl_src35.arf
[Tue Jan 17 08:11:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 08:11:34 2012] Updating source flux to 1.4e-14
[Tue Jan 17 08:13:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting