[Mon Jan 16 17:54:42 2012] Detection parameters:
  Position = (130.3, 346.0) = 3 33 24.59 -27 47 10.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.2 +/- 18.7
  Background counts = 88.9
  Rate = 0.0007 +/- 0.0002

[Mon Jan 16 17:54:42 2012] Off-axis axis estimate = 12.67'
[Mon Jan 16 20:17:53 2012] Using EEF radius (= 12.76 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 20:17:53 2012] Initial guess for spatial extent in simple fitting = 12.76"
[Mon Jan 16 20:17:53 2012] source mask rpix=2.9, npix_max = 47, mask sum = 41, frac = 0.869
[Mon Jan 16 20:17:53 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 12.76"
[Mon Jan 16 21:05:23 2012] fullrun_mos2_xmm0555780901_pi300-10000_cl_pass0_src42.ximg exists
[Mon Jan 16 21:05:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555780901_pi300-10000_cl_pass0_src42.csv
[Mon Jan 16 21:05:23 2012] fullrun_mos2_xmm0555780901_pi300-10000_cl_pass0_src42_1.ximg exists
[Mon Jan 16 21:05:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555780901_pi300-10000_cl_pass0_src42.csv
[Mon Jan 16 21:05:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555780901_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555780901_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 21:05:23 2012] fullrun_mos2_xmm0555780901_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Mon Jan 16 21:05:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555780901_pi300-10000_cl_pass0_tfrozen_src42.csv
[Mon Jan 16 21:05:23 2012] fullrun_mos2_xmm0555780901_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Mon Jan 16 21:05:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555780901_pi300-10000_cl_pass0_tfrozen_src42.csv
[Mon Jan 16 21:05:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555780901_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555780901_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 21:05:48 2012] Spatial fit model total counts = 310.537000, observed total counts = 374.000000
[Mon Jan 16 21:05:48 2012] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jan 16 21:05:48 2012] Vigneting correction estimate = 1.000000
[Mon Jan 16 21:05:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 16 21:05:48 2012] Assessing source extent using major
[Mon Jan 16 21:05:48 2012] Source does appear to be extended
[Mon Jan 16 21:05:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 04:40:42 2012] Using EEF radius (= 12.76 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 04:40:42 2012] Initial guess for spatial extent in simple fitting = 12.76"
[Tue Jan 17 04:40:42 2012] source mask rpix=2.9, npix_max = 47, mask sum = 41, frac = 0.869
[Tue Jan 17 04:40:42 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 12.76"
[Tue Jan 17 05:17:22 2012] fullrun_mos2_xmm0555780901_pi300-10000_cl_pass1_src40.ximg exists
[Tue Jan 17 05:17:22 2012] fullrun_mos2_xmm0555780901_pi300-10000_cl_pass1_src40_1.ximg exists
[Tue Jan 17 05:17:22 2012] Fit fullrun_mos2_xmm0555780901_pi300-10000_cl_pass1_src40 appears to have run properly
[Tue Jan 17 05:17:22 2012] fullrun_mos2_xmm0555780901_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Tue Jan 17 05:17:22 2012] fullrun_mos2_xmm0555780901_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Tue Jan 17 05:17:22 2012] Fit fullrun_mos2_xmm0555780901_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Tue Jan 17 05:17:39 2012] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 15.708080 pixels away
[Tue Jan 17 05:17:39 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 05:17:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 05:17:39 2012] Assessing source extent using major
[Tue Jan 17 05:17:39 2012] Source does appear to be extended
[Tue Jan 17 05:17:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 07:38:03 2012] XMMSAS src. selection expression = ellipse(11286.258148, 30054.822205, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 17 07:38:03 2012] Writing source region out to fullrun_mos2_xmm0555780901_pi300-10000_pass1_cl_src27_src.reg
[Tue Jan 17 07:38:03 2012] Extracting stamp from image fullrun_mos2_xmm0555780901_pi300-10000_cl_sm2.00.img.gz, (93, 309) - (168, 384)
[Tue Jan 17 07:38:03 2012] XMMSAS bgd. selection expression = annulus(11286.258148, 30054.822205, 1087.500000, 2175.000000, X, Y) && !ellipse(11651.028641, 31236.304932, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 17 07:38:03 2012] Writing fullrun_mos2_xmm0555780901_pi300-10000_pass1_cl_src27.gif
[Tue Jan 17 07:47:14 2012] Mean detx,y = (15903.32, -4983.22) 
[Tue Jan 17 07:47:15 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 07:47:24 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 07:47:24 2012] Setting source spectrum file to fullrun_mos2_xmm0555780901_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Tue Jan 17 07:47:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0555780901_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Tue Jan 17 08:09:06 2012] Not generating rmf since there are only 84 counts
[Tue Jan 17 08:09:06 2012] rmf not generated due to insufficient counts
[Tue Jan 17 08:11:33 2012] Updating aperture counts using extracted products
[Tue Jan 17 08:11:33 2012] Error reading totcts from fullrun_mos2_xmm0555780901_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Tue Jan 17 08:11:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 08:11:34 2012] Using photon index=1.80, rate=0.000698, arf fullrun_mos2_xmm0555780901_pi300-10000_pass1_cl_src27.arf
[Tue Jan 17 08:11:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 08:11:34 2012] Updating source flux to 2.6e-14
[Tue Jan 17 08:13:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting