[Mon Jan 16 17:54:39 2012] Detection parameters:
  Position = (326.4, 138.7) = 3 32 20.29 -28 2 18.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 196.0 +/- 23.4
  Background counts = 115.6
  Rate = 0.002 +/- 0.0002

[Mon Jan 16 17:54:39 2012] Off-axis axis estimate = 11.76'
[Mon Jan 16 19:28:39 2012] Using EEF radius (= 12.31 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 19:28:39 2012] Initial guess for spatial extent in simple fitting = 12.31"
[Mon Jan 16 19:28:39 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.105
[Mon Jan 16 19:28:39 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 12.31"
[Mon Jan 16 20:17:52 2012] fullrun_mos1_xmm0555780901_pi300-10000_cl_pass0_src15.ximg exists
[Mon Jan 16 20:17:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555780901_pi300-10000_cl_pass0_src15.csv
[Mon Jan 16 20:17:52 2012] fullrun_mos1_xmm0555780901_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon Jan 16 20:17:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555780901_pi300-10000_cl_pass0_src15.csv
[Mon Jan 16 20:17:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555780901_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555780901_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 20:17:52 2012] fullrun_mos1_xmm0555780901_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon Jan 16 20:17:52 2012] fullrun_mos1_xmm0555780901_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Jan 16 20:17:52 2012] Fit fullrun_mos1_xmm0555780901_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Mon Jan 16 21:05:41 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 16.074432 pixels away
[Mon Jan 16 21:05:41 2012] Vigneting correction estimate = 1.000000
[Mon Jan 16 21:05:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 16 21:05:41 2012] Assessing source extent using major
[Mon Jan 16 21:05:41 2012] Source does appear to be extended
[Mon Jan 16 21:05:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 16 22:16:37 2012] Using EEF radius (= 12.31 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 22:16:37 2012] Initial guess for spatial extent in simple fitting = 12.31"
[Mon Jan 16 22:16:37 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.105
[Mon Jan 16 22:16:37 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 12.31"
[Tue Jan 17 04:40:41 2012] fullrun_mos1_xmm0555780901_pi300-10000_cl_pass1_src14.ximg exists
[Tue Jan 17 04:40:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0555780901_pi300-10000_cl_pass1_src14.csv
[Tue Jan 17 04:40:41 2012] fullrun_mos1_xmm0555780901_pi300-10000_cl_pass1_src14_1.ximg exists
[Tue Jan 17 04:40:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0555780901_pi300-10000_cl_pass1_src14.csv
[Tue Jan 17 04:40:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555780901_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555780901_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 04:40:42 2012] fullrun_mos1_xmm0555780901_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Tue Jan 17 04:40:42 2012] fullrun_mos1_xmm0555780901_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Tue Jan 17 04:40:42 2012] Fit fullrun_mos1_xmm0555780901_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Tue Jan 17 05:17:34 2012] Spatial fit model total counts = 507.799000, observed total counts = 509.000000
[Tue Jan 17 05:17:34 2012] Offset between fit and detection position for source 34 = 0.335085 pixels
[Tue Jan 17 05:17:34 2012] 533.562000 total counts/ 341.405000 bgd. counts: snr = 10.399711
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.335085 pixels
  Position = (326.0, 138.6) = 3 32 20.40 -28 2 17.4
  Extent = 10.0 (7.0-15.0)", rotation angle = 0
  Source counts = 192.2 +/- 23.1
  Background counts = 341.4
  Rate = 0.002 +/- 0.0002
[Tue Jan 17 05:17:34 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 05:17:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 05:17:34 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 05:17:34 2012] Source does appear to be extended
[Tue Jan 17 05:17:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 07:00:12 2012] XMMSAS src. selection expression = ellipse(28317.046200, 12010.433400, 601.262123, 601.262123, 0.000000, X, Y)
[Tue Jan 17 07:00:12 2012] Writing source region out to fullrun_mos1_xmm0555780901_pi300-10000_pass1_cl_src34_src.reg
[Tue Jan 17 07:00:12 2012] Extracting stamp from image fullrun_mos1_xmm0555780901_pi300-10000_cl_sm2.00.img.gz, (291, 104) - (361, 173)
[Tue Jan 17 07:00:12 2012] XMMSAS bgd. selection expression = annulus(28317.046200, 12010.433400, 1002.103538, 2004.207076, X, Y)
[Tue Jan 17 07:00:12 2012] Writing fullrun_mos1_xmm0555780901_pi300-10000_pass1_cl_src34.gif
[Tue Jan 17 07:03:50 2012] Mean detx,y = (-12472.64, 7354.86) 
[Tue Jan 17 07:03:51 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 07:04:00 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 07:04:00 2012] Setting source spectrum file to fullrun_mos1_xmm0555780901_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Tue Jan 17 07:04:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0555780901_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Tue Jan 17 08:11:31 2012] Updating aperture counts using extracted products
[Tue Jan 17 08:11:31 2012] Error reading totcts from fullrun_mos1_xmm0555780901_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Tue Jan 17 08:11:32 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 08:11:32 2012] Using photon index=1.80, rate=0.00189, arf fullrun_mos1_xmm0555780901_pi300-10000_pass1_cl_src34.arf
[Tue Jan 17 08:11:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 08:11:32 2012] Updating source flux to 4.3e-14