[Mon Jan 16 23:35:13 2012] Detection parameters:
  Position = (161.3, 415.3) = 3 33 14.43 -27 41 42.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.3 +/- 11.9
  Background counts = 26.3
  Rate = 0.01 +/- 0.003

[Mon Jan 16 23:35:13 2012] Off-axis axis estimate = 13.07'
[Tue Jan 17 00:52:52 2012] Using EEF radius (= 12.96 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 00:52:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 00:52:52 2012] Initial guess for spatial extent in simple fitting = 12.96"
[Tue Jan 17 00:52:52 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.012
[Tue Jan 17 00:52:52 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.96"
[Tue Jan 17 00:56:18 2012] fullrun_mos1_xmm0555780801_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jan 17 00:56:18 2012] fullrun_mos1_xmm0555780801_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jan 17 00:56:18 2012] Fit fullrun_mos1_xmm0555780801_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue Jan 17 00:56:18 2012] fullrun_mos1_xmm0555780801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jan 17 00:56:18 2012] fullrun_mos1_xmm0555780801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jan 17 00:56:18 2012] Fit fullrun_mos1_xmm0555780801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jan 17 00:58:40 2012] Spatial fit model total counts = 575.449000, observed total counts = 585.000000
[Tue Jan 17 00:58:40 2012] Offset between fit and detection position for source 1 = 7.572606 pixels
[Tue Jan 17 00:58:40 2012] 600.352000 total counts/ 407.272000 bgd. counts: snr = 9.567424
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 7.572606 pixels
  Position = (155.1, 411.0) = 3 33 16.47 -27 41 59.7
  Extent = 25.9 (25.6-51.8)" x 13.6 (11.0-16.1)", rotation angle = 126 (119-137) degrees
  Source counts = 193.1 +/- 24.5
  Background counts = 407.3
  Rate = 0.05 +/- 0.007
[Tue Jan 17 00:58:40 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 00:58:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 00:58:40 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 00:58:40 2012] Source does appear to be extended
[Tue Jan 17 00:58:40 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.59
[Tue Jan 17 00:58:40 2012] Source is asymmetric
[Tue Jan 17 02:09:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 02:09:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 02:09:02 2012] Initial guess for spatial extent in simple fitting = 19.74"
[Tue Jan 17 02:09:02 2012] source mask rpix=4.5, npix_max = 101, mask sum = 93, frac = 0.916
[Tue Jan 17 02:09:02 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 19.74"
[Tue Jan 17 02:13:46 2012] fullrun_mos1_xmm0555780801_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jan 17 02:13:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555780801_pi300-10000_cl_pass1_src1.csv
[Tue Jan 17 02:13:46 2012] fullrun_mos1_xmm0555780801_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jan 17 02:13:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555780801_pi300-10000_cl_pass1_src1.csv
[Tue Jan 17 02:13:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555780801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555780801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 02:13:46 2012] fullrun_mos1_xmm0555780801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan 17 02:13:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555780801_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jan 17 02:13:46 2012] fullrun_mos1_xmm0555780801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan 17 02:13:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555780801_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jan 17 02:13:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555780801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555780801_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 02:15:49 2012] Spatial fit model total counts = 776.199000, observed total counts = 935.000000
[Tue Jan 17 02:15:49 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jan 17 02:15:49 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 02:15:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 02:15:49 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 02:15:49 2012] Source does appear to be extended
[Tue Jan 17 02:15:49 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.59
[Tue Jan 17 02:15:49 2012] Source is asymmetric
[Tue Jan 17 04:07:28 2012] XMMSAS src. selection expression = ellipse(13441.234000, 35708.166000, 1555.380045, 813.942023, 126.315700, X, Y)
[Tue Jan 17 04:07:28 2012] Writing source region out to fullrun_mos1_xmm0555780801_pi300-10000_pass1_cl_src1_src.reg
[Tue Jan 17 04:07:28 2012] Extracting stamp from image fullrun_mos1_xmm0555780801_pi300-10000_cl_sm2.00.img.gz, (66, 322) - (244, 500)
[Tue Jan 17 04:07:28 2012] XMMSAS bgd. selection expression = annulus(13441.234000, 35708.166000, 2592.300075, 5184.600149, X, Y)
[Tue Jan 17 04:07:28 2012] Writing fullrun_mos1_xmm0555780801_pi300-10000_pass1_cl_src1.gif
[Tue Jan 17 04:07:30 2012] Mean detx,y = (1221.23, -16577.70) 
[Tue Jan 17 04:07:30 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 04:07:57 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 04:07:57 2012] Setting source spectrum file to fullrun_mos1_xmm0555780801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jan 17 04:07:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0555780801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jan 17 04:18:02 2012] Updating aperture counts using extracted products
[Tue Jan 17 04:18:02 2012] Error reading totcts from fullrun_mos1_xmm0555780801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jan 17 04:18:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 04:18:02 2012] Using photon index=1.80, rate=0.0542, arf fullrun_mos1_xmm0555780801_pi300-10000_pass1_cl_src1.arf
[Tue Jan 17 04:18:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 04:18:02 2012] Updating source flux to 1.8e-12
[Tue Jan 17 04:18:03 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Tue Jan 17 04:18:19 2012] xmm0555780801/analysis//spectral/fullrun_mos1_xmm0555780801_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete