[Thu Feb 16 23:34:10 2012] Detection parameters:
  Position = (315.1, 431.0) = 3 32 26.23 -27 40 35.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 419.3 +/- 27.9
  Background counts = 72.1
  Rate = 0.004 +/- 0.0003

[Thu Feb 16 23:34:11 2012] Off-axis axis estimate = 9.69'
[Fri Feb 17 01:05:03 2012] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 01:05:03 2012] Initial guess for spatial extent in simple fitting = 11.27"
[Fri Feb 17 01:05:03 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.942
[Fri Feb 17 01:05:03 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.27"
[Fri Feb 17 01:36:10 2012] fullrun_mos1_xmm0555780501_pi300-10000_cl_pass0_src3.ximg exists
[Fri Feb 17 01:36:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555780501_pi300-10000_cl_pass0_src3.csv
[Fri Feb 17 01:36:10 2012] fullrun_mos1_xmm0555780501_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Feb 17 01:36:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555780501_pi300-10000_cl_pass0_src3.csv
[Fri Feb 17 01:36:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555780501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555780501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 01:36:10 2012] fullrun_mos1_xmm0555780501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Feb 17 01:36:10 2012] fullrun_mos1_xmm0555780501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Feb 17 01:36:10 2012] Fit fullrun_mos1_xmm0555780501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Feb 17 02:19:01 2012] Warning, spatial fit 3 centroid is now closest to src. 2
[Fri Feb 17 02:19:01 2012] Source 6 is offset by 1.611834 and 5.153484 pixels which is larger than
2 X fitted extent = 3.484796 x 3.484796, not incorporating fit results
[Fri Feb 17 02:19:01 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 02:19:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 02:19:01 2012] Assessing source extent using major
[Fri Feb 17 02:19:01 2012] Source does appear to be extended
[Fri Feb 17 02:19:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 02:19:01 2012] Source is confused with source 2
[Fri Feb 17 03:35:17 2012] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 03:35:17 2012] Initial guess for spatial extent in simple fitting = 11.27"
[Fri Feb 17 03:35:17 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.942
[Fri Feb 17 03:35:17 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.27"
[Fri Feb 17 04:11:32 2012] fullrun_mos1_xmm0555780501_pi300-10000_cl_pass1_src3.ximg exists
[Fri Feb 17 04:11:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555780501_pi300-10000_cl_pass1_src3.csv
[Fri Feb 17 04:11:32 2012] fullrun_mos1_xmm0555780501_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Feb 17 04:11:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555780501_pi300-10000_cl_pass1_src3.csv
[Fri Feb 17 04:11:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555780501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555780501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 04:11:32 2012] fullrun_mos1_xmm0555780501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Feb 17 04:11:32 2012] fullrun_mos1_xmm0555780501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Feb 17 04:11:32 2012] Fit fullrun_mos1_xmm0555780501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Feb 17 04:52:25 2012] Warning, spatial fit 3 centroid is now closest to src. 2
[Fri Feb 17 04:52:25 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 04:52:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 04:52:25 2012] Assessing source extent using major
[Fri Feb 17 04:52:25 2012] Source does appear to be extended
[Fri Feb 17 04:52:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 07:18:33 2012] XMMSAS src. selection expression = ellipse(27363.591583, 37447.791107, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Feb 17 07:18:33 2012] Writing source region out to fullrun_mos1_xmm0555780501_pi300-10000_pass1_cl_src6_src.reg
[Fri Feb 17 07:18:33 2012] Extracting stamp from image fullrun_mos1_xmm0555780501_pi300-10000_cl_sm2.00.img.gz, (278, 393) - (353, 468)
[Fri Feb 17 07:18:33 2012] XMMSAS bgd. selection expression = annulus(27363.591583, 37447.791107, 1087.500000, 2175.000000, X, Y) && !ellipse(27221.937800, 36825.376000, 446.147213, 446.147213, 0.000000, X, Y) && !ellipse(27045.160645, 36102.633789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25159.046417, 39139.761627, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 17 07:18:33 2012] Writing fullrun_mos1_xmm0555780501_pi300-10000_pass1_cl_src6.gif
[Fri Feb 17 07:20:54 2012] Mean detx,y = (9202.42, -5486.17) 
[Fri Feb 17 07:20:55 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 07:21:09 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 07:21:09 2012] Setting source spectrum file to fullrun_mos1_xmm0555780501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Feb 17 07:21:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0555780501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Feb 17 07:34:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Feb 17 07:34:46 2012] rmf not generated due to insufficient counts
[Fri Feb 17 08:25:44 2012] Updating aperture counts using extracted products
[Fri Feb 17 08:25:44 2012] Error reading totcts from fullrun_mos1_xmm0555780501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Feb 17 08:25:45 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 08:25:45 2012] Using photon index=1.80, rate=0.00381, arf fullrun_mos1_xmm0555780501_pi300-10000_pass1_cl_src6.arf
[Fri Feb 17 08:25:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 08:25:45 2012] Updating source flux to 7e-14
[Fri Feb 17 08:25:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting