[Tue Jan 17 10:28:57 2012] Detection parameters:
  Position = (373.5, 252.2) = 3 32 8.41 -27 47 37.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2602.6 +/- 67.4
  Background counts = 282.8
  Rate = 0.04 +/- 0.001

[Tue Jan 17 10:29:00 2012] Off-axis axis estimate = 6.39'
[Tue Jan 17 10:36:01 2012] Using EEF radius (= 9.62 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 10:36:01 2012] Initial guess for spatial extent in simple fitting = 9.62"
[Tue Jan 17 10:36:01 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.019
[Tue Jan 17 10:36:01 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.62"
[Tue Jan 17 11:34:01 2012] fullrun_pn_xmm0555780401_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jan 17 11:34:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555780401_pi300-10000_cl_pass0_src1.csv
[Tue Jan 17 11:34:01 2012] fullrun_pn_xmm0555780401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jan 17 11:34:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555780401_pi300-10000_cl_pass0_src1.csv
[Tue Jan 17 11:34:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555780401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555780401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 11:34:01 2012] fullrun_pn_xmm0555780401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jan 17 11:34:01 2012] fullrun_pn_xmm0555780401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jan 17 11:34:01 2012] Fit fullrun_pn_xmm0555780401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jan 17 13:18:38 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.789094 pixels away
[Tue Jan 17 13:18:38 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 13:18:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 13:18:38 2012] Assessing source extent using major
[Tue Jan 17 13:18:38 2012] Source does appear to be extended
[Tue Jan 17 13:18:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 13:19:02 2012] Using EEF radius (= 9.62 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 13:19:02 2012] Initial guess for spatial extent in simple fitting = 9.62"
[Tue Jan 17 13:19:02 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.019
[Tue Jan 17 13:19:02 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.62"
[Tue Jan 17 14:22:19 2012] fullrun_pn_xmm0555780401_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jan 17 14:22:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555780401_pi300-10000_cl_pass1_src1.csv
[Tue Jan 17 14:22:19 2012] fullrun_pn_xmm0555780401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jan 17 14:22:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555780401_pi300-10000_cl_pass1_src1.csv
[Tue Jan 17 14:22:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555780401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555780401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 14:22:19 2012] fullrun_pn_xmm0555780401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan 17 14:22:19 2012] fullrun_pn_xmm0555780401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan 17 14:22:19 2012] Fit fullrun_pn_xmm0555780401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jan 17 16:01:33 2012] Spatial fit model total counts = 3580.370000, observed total counts = 3581.000000
[Tue Jan 17 16:01:33 2012] Offset between fit and detection position for source 1 = 0.170848 pixels
[Tue Jan 17 16:01:33 2012] 3583.010000 total counts/ 2108.380000 bgd. counts: snr = 32.115051
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.170848 pixels
  Position = (373.4, 252.3) = 3 32 8.44 -27 47 36.7
  Extent = 5.7 (5.4-6.0)", rotation angle = 0
  Source counts = 1474.6 +/- 59.9
  Background counts = 2108.4
  Rate = 0.02 +/- 0.0008
[Tue Jan 17 16:01:33 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 16:01:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 16:01:33 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 16:01:33 2012] Source does appear to be extended
[Tue Jan 17 16:01:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 16:01:56 2012] Counts = 1474.630000, rescaling region sizes by 2.000000
[Tue Jan 17 16:01:56 2012] XMMSAS src. selection expression = ellipse(32436.951800, 21903.053800, 687.780020, 687.780020, 0.000000, X, Y)
[Tue Jan 17 16:01:56 2012] Writing source region out to fullrun_pn_xmm0555780401_pi300-10000_pass1_cl_src1_src.reg
[Tue Jan 17 16:01:56 2012] Extracting stamp from image fullrun_pn_xmm0555780401_pi300-10000_cl_sm2.00.img.gz, (334, 213) - (413, 292)
[Tue Jan 17 16:01:56 2012] XMMSAS bgd. selection expression = annulus(32436.951800, 21903.053800, 2292.600066, 4585.200132, X, Y) && !ellipse(37543.706696, 26937.570892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31837.666800, 25903.121000, 349.597610, 349.597610, 0.000000, X, Y) && !ellipse(34423.296000, 26795.208000, 1093.744031, 1093.744031, 0.000000, X, Y)
[Tue Jan 17 16:01:56 2012] Writing fullrun_pn_xmm0555780401_pi300-10000_pass1_cl_src1.gif
[Tue Jan 17 16:02:32 2012] Mean detx,y = (-8698.75, 999.05) 
[Tue Jan 17 16:02:39 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 16:03:37 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 16:03:37 2012] Setting source spectrum file to fullrun_pn_xmm0555780401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jan 17 16:03:37 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555780401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jan 17 19:14:33 2012] Updating aperture counts using extracted products
[Tue Jan 17 19:14:33 2012] Error reading totcts from fullrun_pn_xmm0555780401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jan 17 19:14:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 19:14:34 2012] Using photon index=1.80, rate=0.0187, arf fullrun_pn_xmm0555780401_pi300-10000_pass1_cl_src1.arf
[Tue Jan 17 19:14:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 19:14:34 2012] Updating source flux to 8.2e-14
[Tue Jan 17 19:19:52 2012] Reading fit data from xmm0555780401/analysis//spectral/fullrun_pn_xmm0555780401_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jan 17 19:19:52 2012] Spectral fit parameter nH value = 7.23605e+20
[Tue Jan 17 19:19:52 2012] Spectral fit parameter PhoIndex value = 2.23126
[Tue Jan 17 19:19:52 2012] Failed to get F(0.3-8.0) from xmm0555780401/analysis//spectral/fullrun_pn_xmm0555780401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jan 17 19:19:52 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 19:19:52 2012] Using Nh = 7.2e+20, photon index=2.23, rate=0.0187, arf fullrun_pn_xmm0555780401_pi300-10000_pass1_cl_src1.arf
[Tue Jan 17 19:19:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 19:19:52 2012] Updating source flux to 7.5e-14