[Tue Jan 17 10:29:05 2012] Detection parameters:
  Position = (196.2, 150.4) = 3 33 6.55 -27 54 58.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.1 +/- 20.2
  Background counts = 109.5
  Rate = 0.001 +/- 0.0002

[Tue Jan 17 10:29:06 2012] Off-axis axis estimate = 13.04'
[Tue Jan 17 12:12:03 2012] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 12:12:03 2012] Initial guess for spatial extent in simple fitting = 12.95"
[Tue Jan 17 12:12:03 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.013
[Tue Jan 17 12:12:03 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 12.95"
[Tue Jan 17 13:18:29 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_src35.ximg exists
[Tue Jan 17 13:18:29 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_src35_1.ximg exists
[Tue Jan 17 13:18:29 2012] Fit fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_src35 appears to have run properly
[Tue Jan 17 13:18:29 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Tue Jan 17 13:18:29 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Tue Jan 17 13:18:29 2012] Fit fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Tue Jan 17 13:18:49 2012] Spatial fit model total counts = 1008.240000, observed total counts = 1007.000000
[Tue Jan 17 13:18:49 2012] Offset between fit and detection position for source 38 = 5.434105 pixels
[Tue Jan 17 13:18:49 2012] 981.430000 total counts/ 746.566000 bgd. counts: snr = 8.595722
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 5.434105 pixels
  Position = (199.4, 154.8) = 3 33 5.50 -27 54 40.6
  Extent = 26.4 (20.8-52.7)" x 14.9 (10.3-21.1)", rotation angle = 314 (290-336) degrees
  Source counts = 234.9 +/- 31.3
  Background counts = 746.6
  Rate = 0.002 +/- 0.0003
[Tue Jan 17 13:18:49 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 13:18:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 13:18:49 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 13:18:49 2012] Source does appear to be extended
[Tue Jan 17 13:18:49 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.99
[Tue Jan 17 14:58:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 14:58:49 2012] Initial guess for spatial extent in simple fitting = 20.62"
[Tue Jan 17 14:58:49 2012] source mask rpix=4.7, npix_max = 109, mask sum = 106, frac = 0.965
[Tue Jan 17 14:58:49 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 20.62"
[Tue Jan 17 16:01:25 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_src34.ximg exists
[Tue Jan 17 16:01:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_src34.csv
[Tue Jan 17 16:01:25 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_src34_1.ximg exists
[Tue Jan 17 16:01:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_src34.csv
[Tue Jan 17 16:01:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 16:01:25 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Tue Jan 17 16:01:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_tfrozen_src34.csv
[Tue Jan 17 16:01:25 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Tue Jan 17 16:01:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_tfrozen_src34.csv
[Tue Jan 17 16:01:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 16:01:44 2012] Warning, spatial fit 34 centroid is now closest to src. 17
[Tue Jan 17 16:01:44 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 16:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 16:01:44 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 16:01:44 2012] Source does appear to be extended
[Tue Jan 17 16:01:44 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.99
[Tue Jan 17 18:27:47 2012] XMMSAS src. selection expression = ellipse(17302.360000, 13422.012000, 1581.450046, 893.172026, 314.428000, X, Y)
[Tue Jan 17 18:27:47 2012] Writing source region out to fullrun_mos2_xmm0555780401_pi300-10000_pass1_cl_src38_src.reg
[Tue Jan 17 18:27:47 2012] Extracting stamp from image fullrun_mos2_xmm0555780401_pi300-10000_cl_sm2.00.img.gz, (109, 64) - (290, 246)
[Tue Jan 17 18:27:48 2012] XMMSAS bgd. selection expression = annulus(17302.360000, 13422.012000, 2635.750076, 5271.500152, X, Y) && !ellipse(15911.433350, 10646.605171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16768.766205, 17249.157913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19353.123932, 18717.596207, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(16268.164413, 11398.705276, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 17 18:27:48 2012] Writing fullrun_mos2_xmm0555780401_pi300-10000_pass1_cl_src38.gif
[Tue Jan 17 18:38:05 2012] Mean detx,y = (-519.64, 13429.98) 
[Tue Jan 17 18:38:06 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 18:38:44 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 18:38:44 2012] Setting source spectrum file to fullrun_mos2_xmm0555780401_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Tue Jan 17 18:38:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0555780401_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Tue Jan 17 19:14:37 2012] Updating aperture counts using extracted products
[Tue Jan 17 19:14:37 2012] Error reading totcts from fullrun_mos2_xmm0555780401_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Tue Jan 17 19:14:38 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 19:14:38 2012] Using photon index=1.80, rate=0.00234, arf fullrun_mos2_xmm0555780401_pi300-10000_pass1_cl_src38.arf
[Tue Jan 17 19:14:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 19:14:38 2012] Updating source flux to 5.6e-14