[Tue Jan 17 10:29:05 2012] Detection parameters:
  Position = (219.1, 195.7) = 3 32 59.05 -27 51 42.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.5 +/- 18.7
  Background counts = 115.4
  Rate = 0.001 +/- 0.0003

[Tue Jan 17 10:29:06 2012] Off-axis axis estimate = 9.41'
[Tue Jan 17 12:12:03 2012] Using EEF radius (= 11.14 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 12:12:03 2012] Initial guess for spatial extent in simple fitting = 11.14"
[Tue Jan 17 12:12:03 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.961
[Tue Jan 17 12:12:03 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 11.14"
[Tue Jan 17 13:18:28 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_src23.ximg exists
[Tue Jan 17 13:18:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_src23.csv
[Tue Jan 17 13:18:28 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_src23_1.ximg exists
[Tue Jan 17 13:18:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_src23.csv
[Tue Jan 17 13:18:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 13:18:29 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Tue Jan 17 13:18:29 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Tue Jan 17 13:18:29 2012] Fit fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Tue Jan 17 13:18:49 2012] Spatial fit model total counts = 838.998000, observed total counts = 839.000000
[Tue Jan 17 13:18:49 2012] Offset between fit and detection position for source 36 = 4.957568 pixels
[Tue Jan 17 13:18:49 2012] 863.266000 total counts/ 523.545000 bgd. counts: snr = 14.847228
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 4.957568 pixels
  Position = (217.0, 191.2) = 3 32 59.74 -27 52 2.6
  Extent = 22.3 (7.0-44.5)", rotation angle = 0
  Source counts = 339.7 +/- 29.4
  Background counts = 523.5
  Rate = 0.003 +/- 0.0003
[Tue Jan 17 13:18:49 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 13:18:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 13:18:49 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 13:18:49 2012] Source does appear to be extended
[Tue Jan 17 13:18:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 14:58:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 14:58:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 14:58:49 2012] Initial guess for spatial extent in simple fitting = 22.27"
[Tue Jan 17 14:58:49 2012] source mask rpix=5.1, npix_max = 126, mask sum = 131, frac = 1.037
[Tue Jan 17 14:58:49 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 22.27"
[Tue Jan 17 16:01:25 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_src23.ximg exists
[Tue Jan 17 16:01:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_src23.csv
[Tue Jan 17 16:01:25 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_src23_1.ximg exists
[Tue Jan 17 16:01:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_src23.csv
[Tue Jan 17 16:01:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 16:01:25 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Tue Jan 17 16:01:25 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Tue Jan 17 16:01:25 2012] Fit fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Tue Jan 17 16:01:44 2012] Spatial fit model total counts = 2874.500000, observed total counts = 2867.000000
[Tue Jan 17 16:01:44 2012] Offset between fit and detection position for source 36 = 3.989419 pixels
[Tue Jan 17 16:01:44 2012] 2858.110500 total counts/ 2774.450000 bgd. counts: snr = 1.588298
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 3.989419 pixels
  Position = (219.0, 194.6) = 3 32 59.06 -27 51 47.7
  Extent = 10.3 (5.6-35.5)", rotation angle = 0
  Source counts = 83.7 +/- 53.5
  Background counts = 2774.4
  Rate = 0.0008 +/- 0.0005
  Deleting source due to low Poisson probability