[Tue Jan 17 10:29:03 2012] Detection parameters:
  Position = (317.8, 341.8) = 3 32 26.65 -27 41 7.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2314.5 +/- 60.4
  Background counts = 129.1
  Rate = 0.02 +/- 0.0006

[Tue Jan 17 10:29:06 2012] Off-axis axis estimate = 3.45'
[Tue Jan 17 12:12:03 2012] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 12:12:03 2012] Initial guess for spatial extent in simple fitting = 8.15"
[Tue Jan 17 12:12:03 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.109
[Tue Jan 17 12:12:03 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.15"
[Tue Jan 17 13:18:28 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jan 17 13:18:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_src1.csv
[Tue Jan 17 13:18:28 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jan 17 13:18:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_src1.csv
[Tue Jan 17 13:18:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 13:18:29 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jan 17 13:18:29 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jan 17 13:18:29 2012] Fit fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jan 17 13:18:49 2012] Warning, spatial fit 1 centroid is now closest to src. 16
[Tue Jan 17 13:18:49 2012] Spatial fit model total counts = 1031.590000, observed total counts = 1033.000000
[Tue Jan 17 13:18:49 2012] Offset between fit and detection position for source 2 = 1.673055 pixels
[Tue Jan 17 13:18:49 2012] Warning, changing simple spatial fit ID from 1 to 33
[Tue Jan 17 13:18:49 2012] 1057.257000 total counts/ 868.395000 bgd. counts: snr = 6.408936
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.673055 pixels
  Position = (317.5, 340.2) = 3 32 26.77 -27 41 14.6
  Extent = 7.3 (5.8-8.5)", rotation angle = 0
  Source counts = 188.9 +/- 32.5
  Background counts = 868.4
  Rate = 0.002 +/- 0.0003
[Tue Jan 17 13:18:49 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 13:18:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 13:18:49 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 13:18:49 2012] Source does appear to be extended
[Tue Jan 17 13:18:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 14:58:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 14:58:49 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Tue Jan 17 14:58:49 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.045
[Tue Jan 17 14:58:49 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.34"
[Tue Jan 17 16:01:24 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jan 17 16:01:24 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jan 17 16:01:24 2012] Fit fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Jan 17 16:01:25 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan 17 16:01:25 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan 17 16:01:25 2012] Fit fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jan 17 16:01:44 2012] Warning, spatial fit 1 centroid is now closest to src. 19
[Tue Jan 17 16:01:44 2012] Spatial fit model total counts = 1031.320000, observed total counts = 1033.000000
[Tue Jan 17 16:01:44 2012] Offset between fit and detection position for source 2 = 0.000515 pixels
[Tue Jan 17 16:01:44 2012] Warning, changing simple spatial fit ID from 1 to 32
[Tue Jan 17 16:01:44 2012] 1057.027000 total counts/ 868.220000 bgd. counts: snr = 6.407715
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000515 pixels
  Position = (317.5, 340.2) = 3 32 26.77 -27 41 14.6
  Extent = 7.3 (5.8-8.5)", rotation angle = 0
  Source counts = 188.8 +/- 32.5
  Background counts = 868.2
  Rate = 0.002 +/- 0.0003
[Tue Jan 17 16:01:44 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 16:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 16:01:44 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 16:01:44 2012] Source does appear to be extended
[Tue Jan 17 16:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 18:27:47 2012] XMMSAS src. selection expression = ellipse(27574.344200, 29547.472000, 440.182213, 440.182213, 0.000000, X, Y)
[Tue Jan 17 18:27:47 2012] Writing source region out to fullrun_mos2_xmm0555780401_pi300-10000_pass1_cl_src2_src.reg
[Tue Jan 17 18:27:47 2012] Extracting stamp from image fullrun_mos2_xmm0555780401_pi300-10000_cl_sm2.00.img.gz, (292, 315) - (343, 365)
[Tue Jan 17 18:27:47 2012] XMMSAS bgd. selection expression = annulus(27574.344200, 29547.472000, 733.637021, 1467.274042, X, Y) && !ellipse(27732.207886, 30192.735046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27422.421722, 28874.433350, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 17 18:27:47 2012] Writing fullrun_mos2_xmm0555780401_pi300-10000_pass1_cl_src2.gif
[Tue Jan 17 18:27:54 2012] Mean detx,y = (868.56, -5707.79) 
[Tue Jan 17 18:27:55 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 18:28:05 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 18:28:05 2012] Setting source spectrum file to fullrun_mos2_xmm0555780401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jan 17 18:28:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0555780401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jan 17 19:14:37 2012] Updating aperture counts using extracted products
[Tue Jan 17 19:14:37 2012] Error reading totcts from fullrun_mos2_xmm0555780401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jan 17 19:14:37 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 19:14:37 2012] Using photon index=1.80, rate=0.00188, arf fullrun_mos2_xmm0555780401_pi300-10000_pass1_cl_src2.arf
[Tue Jan 17 19:14:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 19:14:37 2012] Updating source flux to 2.5e-14
[Tue Jan 17 19:17:00 2012] Reading fit data from xmm0555780401/analysis//spectral/fullrun_mos2_xmm0555780401_pi300-10000_pass1_cl_src2_pl.csv
[Tue Jan 17 19:17:00 2012] Spectral fit parameter nH value = 7.44786e+12
[Tue Jan 17 19:17:00 2012] Spectral fit parameter PhoIndex value = 1.98834
[Tue Jan 17 19:17:00 2012] Failed to get F(0.3-8.0) from xmm0555780401/analysis//spectral/fullrun_mos2_xmm0555780401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Jan 17 19:17:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 19:17:00 2012] Using Nh = 7.4e+12, photon index=1.99, rate=0.00188, arf fullrun_mos2_xmm0555780401_pi300-10000_pass1_cl_src2.arf
[Tue Jan 17 19:17:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 19:17:00 2012] Updating source flux to 2.3e-14