[Tue Jan 17 10:29:04 2012] Detection parameters:
  Position = (108.0, 362.0) = 3 33 35.36 -27 39 37.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.4 +/- 20.8
  Background counts = 103.1
  Rate = 0.001 +/- 0.0002

[Tue Jan 17 10:29:06 2012] Off-axis axis estimate = 14.55'
[Tue Jan 17 12:12:03 2012] Using EEF radius (= 13.71 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 12:12:03 2012] Initial guess for spatial extent in simple fitting = 13.71"
[Tue Jan 17 12:12:03 2012] source mask rpix=3.2, npix_max = 53, mask sum = 64, frac = 1.201
[Tue Jan 17 12:12:03 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 13.71"
[Tue Jan 17 13:18:28 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_src28.ximg exists
[Tue Jan 17 13:18:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_src28.csv
[Tue Jan 17 13:18:28 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_src28_1.ximg exists
[Tue Jan 17 13:18:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_src28.csv
[Tue Jan 17 13:18:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 13:18:29 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Tue Jan 17 13:18:29 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Tue Jan 17 13:18:29 2012] Fit fullrun_mos2_xmm0555780401_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Tue Jan 17 13:18:49 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 17.825154 pixels away
[Tue Jan 17 13:18:49 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 13:18:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 13:18:49 2012] Assessing source extent using major
[Tue Jan 17 13:18:49 2012] Source does appear to be extended
[Tue Jan 17 13:18:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 14:58:49 2012] Using EEF radius (= 13.71 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 14:58:49 2012] Initial guess for spatial extent in simple fitting = 13.71"
[Tue Jan 17 14:58:49 2012] source mask rpix=3.2, npix_max = 53, mask sum = 64, frac = 1.201
[Tue Jan 17 14:58:49 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 13.71"
[Tue Jan 17 16:01:25 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_src28.ximg exists
[Tue Jan 17 16:01:25 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue Jan 17 16:01:25 2012] Fit fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_src28 appears to have run properly
[Tue Jan 17 16:01:25 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue Jan 17 16:01:25 2012] fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue Jan 17 16:01:25 2012] Fit fullrun_mos2_xmm0555780401_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Tue Jan 17 16:01:44 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 17.825154 pixels away
[Tue Jan 17 16:01:44 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 16:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 16:01:44 2012] Assessing source extent using major
[Tue Jan 17 16:01:44 2012] Source does appear to be extended
[Tue Jan 17 16:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 18:27:47 2012] XMMSAS src. selection expression = ellipse(9348.598518, 31442.786560, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 17 18:27:47 2012] Writing source region out to fullrun_mos2_xmm0555780401_pi300-10000_pass1_cl_src15_src.reg
[Tue Jan 17 18:27:47 2012] Extracting stamp from image fullrun_mos2_xmm0555780401_pi300-10000_cl_sm2.00.img.gz, (71, 324) - (146, 399)
[Tue Jan 17 18:27:47 2012] XMMSAS bgd. selection expression = annulus(9348.598518, 31442.786560, 1087.500000, 2175.000000, X, Y) && !ellipse(9512.729774, 28400.730988, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 17 18:27:47 2012] Writing fullrun_mos2_xmm0555780401_pi300-10000_pass1_cl_src15.gif
[Tue Jan 17 18:36:05 2012] Mean detx,y = (-15994.55, 1445.06) 
[Tue Jan 17 18:36:07 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 18:36:23 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 18:36:24 2012] Setting source spectrum file to fullrun_mos2_xmm0555780401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Jan 17 18:36:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0555780401_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Tue Jan 17 19:03:52 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan 17 19:03:52 2012] rmf not generated due to insufficient counts
[Tue Jan 17 19:14:37 2012] Updating aperture counts using extracted products
[Tue Jan 17 19:14:37 2012] Error reading totcts from fullrun_mos2_xmm0555780401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Jan 17 19:14:38 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 19:14:38 2012] Using photon index=1.80, rate=0.00126, arf fullrun_mos2_xmm0555780401_pi300-10000_pass1_cl_src15.arf
[Tue Jan 17 19:14:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 19:14:38 2012] Updating source flux to 3.2e-14
[Tue Jan 17 19:15:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting