[Tue Jan 17 10:29:02 2012] Detection parameters:
  Position = (166.0, 443.2) = 3 33 16.33 -27 33 43.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.3 +/- 19.0
  Background counts = 108.9
  Rate = 0.0007 +/- 0.0002

[Tue Jan 17 10:29:02 2012] Off-axis axis estimate = 14.22'
[Tue Jan 17 11:34:02 2012] Using EEF radius (= 13.54 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 11:34:02 2012] Initial guess for spatial extent in simple fitting = 13.54"
[Tue Jan 17 11:34:02 2012] source mask rpix=3.1, npix_max = 52, mask sum = 54, frac = 1.034
[Tue Jan 17 11:34:02 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 13.54"
[Tue Jan 17 12:12:02 2012] fullrun_mos1_xmm0555780401_pi300-10000_cl_pass0_src26.ximg exists
[Tue Jan 17 12:12:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555780401_pi300-10000_cl_pass0_src26.csv
[Tue Jan 17 12:12:02 2012] fullrun_mos1_xmm0555780401_pi300-10000_cl_pass0_src26_1.ximg exists
[Tue Jan 17 12:12:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555780401_pi300-10000_cl_pass0_src26.csv
[Tue Jan 17 12:12:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555780401_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555780401_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 12:12:03 2012] fullrun_mos1_xmm0555780401_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Tue Jan 17 12:12:03 2012] fullrun_mos1_xmm0555780401_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Tue Jan 17 12:12:03 2012] Fit fullrun_mos1_xmm0555780401_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Tue Jan 17 13:18:38 2012] Warning, spatial fit 11 centroid is now closest to src. 2
[Tue Jan 17 13:18:42 2012] Spatial fit model total counts = 626.679000, observed total counts = 671.000000
[Tue Jan 17 13:18:42 2012] Offset between fit and detection position for source 26 = 5.554285 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 5.554285 pixels
  Position = (169.0, 447.9) = 3 33 15.35 -27 33 25.6
  Extent = 20.4 (17.9-22.8)", rotation angle = 0
  Source counts = 389.6 +/- 19.7
  Background counts = 0.0
  Rate = 0.004 +/- 0.0002
 Deleting source due to low signal-to-noise ratio