[Tue Jan 17 10:29:01 2012] Detection parameters:
  Position = (206.3, 283.3) = 3 33 3.20 -27 45 20.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 182.9 +/- 19.8
  Background counts = 138.2
  Rate = 0.002 +/- 0.0002

[Tue Jan 17 10:29:02 2012] Off-axis axis estimate = 6.77'
[Tue Jan 17 11:34:02 2012] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 11:34:02 2012] Initial guess for spatial extent in simple fitting = 9.81"
[Tue Jan 17 11:34:02 2012] source mask rpix=2.3, npix_max = 30, mask sum = 22, frac = 0.724
[Tue Jan 17 11:34:02 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 9.81"
[Tue Jan 17 12:12:02 2012] fullrun_mos1_xmm0555780401_pi300-10000_cl_pass0_src10.ximg exists
[Tue Jan 17 12:12:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555780401_pi300-10000_cl_pass0_src10.csv
[Tue Jan 17 12:12:02 2012] fullrun_mos1_xmm0555780401_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Jan 17 12:12:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555780401_pi300-10000_cl_pass0_src10.csv
[Tue Jan 17 12:12:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555780401_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555780401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 12:12:02 2012] fullrun_mos1_xmm0555780401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Jan 17 12:12:02 2012] fullrun_mos1_xmm0555780401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Jan 17 12:12:02 2012] Fit fullrun_mos1_xmm0555780401_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Jan 17 13:18:42 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 13.047728 pixels away
[Tue Jan 17 13:18:42 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 13:18:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 13:18:42 2012] Assessing source extent using major
[Tue Jan 17 13:18:42 2012] Source does appear to be extended
[Tue Jan 17 13:18:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 14:22:20 2012] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 14:22:20 2012] Initial guess for spatial extent in simple fitting = 9.81"
[Tue Jan 17 14:22:20 2012] source mask rpix=2.3, npix_max = 30, mask sum = 22, frac = 0.724
[Tue Jan 17 14:22:20 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 9.81"
[Tue Jan 17 14:58:48 2012] fullrun_mos1_xmm0555780401_pi300-10000_cl_pass1_src10.ximg exists
[Tue Jan 17 14:58:48 2012] fullrun_mos1_xmm0555780401_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Jan 17 14:58:48 2012] Fit fullrun_mos1_xmm0555780401_pi300-10000_cl_pass1_src10 appears to have run properly
[Tue Jan 17 14:58:48 2012] fullrun_mos1_xmm0555780401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Jan 17 14:58:48 2012] fullrun_mos1_xmm0555780401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Jan 17 14:58:48 2012] Fit fullrun_mos1_xmm0555780401_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Jan 17 16:01:37 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 13.047728 pixels away
[Tue Jan 17 16:01:38 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 16:01:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 16:01:38 2012] Assessing source extent using major
[Tue Jan 17 16:01:38 2012] Source does appear to be extended
[Tue Jan 17 16:01:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 17:54:02 2012] XMMSAS src. selection expression = ellipse(17899.987900, 24600.053894, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 17 17:54:02 2012] Writing source region out to fullrun_mos1_xmm0555780401_pi300-10000_pass1_cl_src15_src.reg
[Tue Jan 17 17:54:02 2012] Extracting stamp from image fullrun_mos1_xmm0555780401_pi300-10000_cl_sm2.00.img.gz, (169, 246) - (244, 321)
[Tue Jan 17 17:54:02 2012] XMMSAS bgd. selection expression = annulus(17899.987900, 24600.053894, 1087.500000, 2175.000000, X, Y) && !ellipse(19054.175200, 26595.191000, 380.941611, 380.941611, 0.000000, X, Y)
[Tue Jan 17 17:54:02 2012] Writing fullrun_mos1_xmm0555780401_pi300-10000_pass1_cl_src15.gif
[Tue Jan 17 17:57:20 2012] Mean detx,y = (3545.40, 5055.17) 
[Tue Jan 17 17:57:21 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 17:57:40 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 17:57:40 2012] Setting source spectrum file to fullrun_mos1_xmm0555780401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Jan 17 17:57:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0555780401_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Tue Jan 17 18:20:35 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan 17 18:20:35 2012] rmf not generated due to insufficient counts
[Tue Jan 17 19:14:36 2012] Updating aperture counts using extracted products
[Tue Jan 17 19:14:36 2012] Error reading totcts from fullrun_mos1_xmm0555780401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Jan 17 19:14:36 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 19:14:36 2012] Using photon index=1.80, rate=0.00211, arf fullrun_mos1_xmm0555780401_pi300-10000_pass1_cl_src15.arf
[Tue Jan 17 19:14:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 19:14:36 2012] Updating source flux to 2.5e-14
[Tue Jan 17 19:14:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting