[Tue Jan 17 09:15:31 2012] Detection parameters:
  Position = (317.3, 67.5) = 3 32 26.87 -28 1 27.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150.0 +/- 24.9
  Background counts = 170.2
  Rate = 0.001 +/- 0.0002

[Tue Jan 17 09:15:31 2012] Off-axis axis estimate = 16.80'
[Tue Jan 17 09:20:34 2012] Using EEF radius (= 14.83 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 09:20:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 09:20:34 2012] Initial guess for spatial extent in simple fitting = 14.83"
[Tue Jan 17 09:20:34 2012] source mask rpix=3.4, npix_max = 61, mask sum = 56, frac = 0.916
[Tue Jan 17 09:20:34 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 14.83"
[Tue Jan 17 11:07:16 2012] fullrun_pn_xmm0555780301_pi300-10000_cl_pass0_src65.ximg exists
[Tue Jan 17 11:07:16 2012] fullrun_pn_xmm0555780301_pi300-10000_cl_pass0_src65_1.ximg exists
[Tue Jan 17 11:07:16 2012] Fit fullrun_pn_xmm0555780301_pi300-10000_cl_pass0_src65 appears to have run properly
[Tue Jan 17 11:07:17 2012] fullrun_pn_xmm0555780301_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Tue Jan 17 11:07:17 2012] fullrun_pn_xmm0555780301_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Tue Jan 17 11:07:17 2012] Fit fullrun_pn_xmm0555780301_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Tue Jan 17 12:50:02 2012] Spatial fit model total counts = 1738.830000, observed total counts = 1749.000000
[Tue Jan 17 12:50:02 2012] Offset between fit and detection position for source 69 = 8.293050 pixels
[Tue Jan 17 12:50:02 2012] 1916.855000 total counts/ 175.505000 bgd. counts: snr = 131.444168
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 8.293050 pixels
  Position = (309.4, 64.8) = 3 32 29.44 -28 1 39.8
  Extent = 29.6 (29.6-29.7)", rotation angle = 0
  Source counts = 1741.3 +/- 43.8
  Background counts = 175.5
  Rate = 0.02 +/- 0.0004
[Tue Jan 17 12:50:02 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 12:50:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 12:50:02 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 12:50:02 2012] Source does appear to be extended
[Tue Jan 17 12:50:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 12:50:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 12:50:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 12:50:40 2012] Initial guess for spatial extent in simple fitting = 29.65"
[Tue Jan 17 12:50:40 2012] source mask rpix=6.8, npix_max = 214, mask sum = 157, frac = 0.734
[Tue Jan 17 12:50:40 2012] Giving source the simple spatial ID 62 for pass 1, mean size = 29.65"
[Tue Jan 17 15:38:07 2012] fullrun_pn_xmm0555780301_pi300-10000_cl_pass1_src62.ximg exists
[Tue Jan 17 15:38:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555780301_pi300-10000_cl_pass1_src62.csv
[Tue Jan 17 15:38:07 2012] fullrun_pn_xmm0555780301_pi300-10000_cl_pass1_src62_1.ximg exists
[Tue Jan 17 15:38:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555780301_pi300-10000_cl_pass1_src62.csv
[Tue Jan 17 15:38:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555780301_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555780301_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 15:38:08 2012] fullrun_pn_xmm0555780301_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Tue Jan 17 15:38:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555780301_pi300-10000_cl_pass1_tfrozen_src62.csv
[Tue Jan 17 15:38:08 2012] fullrun_pn_xmm0555780301_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Tue Jan 17 15:38:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555780301_pi300-10000_cl_pass1_tfrozen_src62.csv
[Tue Jan 17 15:38:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555780301_pi300-10000_cl_pass1_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555780301_pi300-10000_cl_pass1_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 17:05:24 2012] Warning, spatial fit 62 centroid is now closest to src. 54
[Tue Jan 17 17:05:24 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 17:05:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 17:05:24 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 17:05:24 2012] Source does appear to be extended
[Tue Jan 17 17:05:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 17:05:49 2012] Counts = 1741.350000, rescaling region sizes by 2.000000
[Tue Jan 17 17:05:49 2012] XMMSAS src. selection expression = ellipse(26873.236000, 5585.574000, 3557.460102, 3557.460102, 0.000000, X, Y)
[Tue Jan 17 17:05:49 2012] Writing source region out to fullrun_pn_xmm0555780301_pi300-10000_pass1_cl_src69_src.reg
[Tue Jan 17 17:05:49 2012] Extracting stamp from image fullrun_pn_xmm0555780301_pi300-10000_cl_sm2.00.img.gz, (105, 0) - (514, 269)
[Tue Jan 17 17:05:50 2012] XMMSAS bgd. selection expression = annulus(26873.236000, 5585.574000, 11858.200341, 23716.400682, X, Y) && !ellipse(32445.629200, 22456.795000, 460.140013, 460.140013, 0.000000, X, Y) && !ellipse(37206.061310, 29982.961182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18255.769791, 9731.530075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40100.171000, 29161.106000, 398.602411, 398.602411, 0.000000, X, Y) && !ellipse(22042.103840, 29359.469400, 445.588813, 445.588813, 0.000000, X, Y) && !ellipse(15680.207980, 27861.442000, 385.856011, 243.768007, 310.702000, X, Y) && !ellipse(34360.002655, 27549.549835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37532.858246, 27533.972778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26685.451000, 25476.057600, 363.816810, 363.816810, 0.000000, X, Y) && !ellipse(23534.282654, 11109.640289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18839.186000, 22201.728000, 320.055209, 320.055209, 0.000000, X, Y) && !ellipse(13054.424026, 22016.171417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10097.598877, 20572.118240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24734.502415, 16903.048235, 416.572037, 341.066139, 0.000000, X, Y) && !ellipse(10327.954529, 14496.410263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38668.773600, 14003.917400, 2190.936063, 681.256820, 121.657000, X, Y) && !ellipse(18614.829532, 13122.792940, 378.640811, 378.640811, 0.000000, X, Y) && !ellipse(12873.283200, 12837.436000, 2254.432065, 1058.392030, 34.178699, X, Y) && !ellipse(15435.903200, 12538.260000, 559.835216, 559.835216, 0.000000, X, Y) && !ellipse(16246.451584, 12063.697189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38232.381400, 15820.702200, 1307.056038, 815.056023, 186.686173, X, Y) && !ellipse(28305.779175, 29872.939423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27645.104000, 30020.379000, 1336.792038, 1336.792038, 0.000000, X, Y) && !ellipse(18460.273996, 29492.083248, 574.126966, 321.827242, 334.022179, X, Y) && !ellipse(21952.834366, 28576.355865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31232.309800, 28339.566000, 374.328011, 374.328011, 0.000000, X, Y) && !ellipse(12153.576800, 27715.430000, 369.468011, 369.468011, 0.000000, X, Y) && !ellipse(31983.998352, 27729.621887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19066.963480, 27168.565400, 521.280815, 521.280815, 0.000000, X, Y) && !ellipse(25029.402000, 26613.394800, 448.872813, 448.872813, 0.000000, X, Y) && !ellipse(31844.894400, 26434.969800, 400.261612, 400.261612, 0.000000, X, Y) && !ellipse(26990.123600, 26725.624000, 1092.840031, 1092.840031, 0.000000, X, Y) && !ellipse(17872.556000, 25178.304000, 369.531211, 369.531211, 0.000000, X, Y) && !ellipse(25979.344269, 24610.493469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18415.042343, 24688.283173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24367.647010, 24282.952248, 553.567775, 500.335132, 103.006445, X, Y) && !ellipse(24037.368225, 11056.013344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26951.095908, 21484.545373, 372.904330, 233.423886, 122.913134, X, Y) && !ellipse(18192.362400, 21552.524600, 1756.000051, 804.440023, 121.514557, X, Y) && !ellipse(16131.643018, 21098.697600, 402.535212, 402.535212, 0.000000, X, Y) && !ellipse(23278.404205, 20493.607697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24448.901400, 11000.537000, 1305.736038, 1305.736038, 0.000000, X, Y) && !ellipse(13278.813400, 20657.351800, 1627.224047, 1627.224047, 0.000000, X, Y) && !ellipse(35710.552000, 20034.442600, 764.691222, 764.691222, 0.000000, X, Y) && !ellipse(13670.178421, 19735.549042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41488.402000, 19273.714000, 2146.946080, 2146.946080, 0.000000, X, Y) && !ellipse(35128.534600, 18663.351200, 698.337620, 698.337620, 0.000000, X, Y) && !ellipse(20700.108400, 17967.060800, 375.074411, 375.074411, 0.000000, X, Y) && !ellipse(21420.647600, 16117.069000, 957.400028, 957.400028, 0.000000, X, Y) && !ellipse(14356.803000, 15155.279600, 361.928010, 361.928010, 0.000000, X, Y)
[Tue Jan 17 17:05:50 2012] Writing fullrun_pn_xmm0555780301_pi300-10000_pass1_cl_src69.gif
[Tue Jan 17 18:31:16 2012] Mean detx,y = (-10828.32, -14610.60) 
[Tue Jan 17 18:31:35 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 18:37:57 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 18:37:57 2012] Setting source spectrum file to fullrun_pn_xmm0555780301_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Tue Jan 17 18:37:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555780301_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Tue Jan 17 22:33:59 2012] Updating aperture counts using extracted products
[Tue Jan 17 22:33:59 2012] Error reading totcts from fullrun_pn_xmm0555780301_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Tue Jan 17 22:34:01 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 22:34:01 2012] Using photon index=1.80, rate=0.017, arf fullrun_pn_xmm0555780301_pi300-10000_pass1_cl_src69.arf
[Tue Jan 17 22:34:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 22:34:01 2012] Updating source flux to 1.8e-13