[Tue Jan 17 09:15:30 2012] Detection parameters:
  Position = (308.9, 302.2) = 3 32 29.64 -27 44 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.9 +/- 21.8
  Background counts = 197.9
  Rate = 0.001 +/- 0.0002

[Tue Jan 17 09:15:31 2012] Off-axis axis estimate = 0.80'
[Tue Jan 17 09:20:34 2012] Using EEF radius (= 6.83 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 09:20:34 2012] Initial guess for spatial extent in simple fitting = 6.83"
[Tue Jan 17 09:20:34 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.933
[Tue Jan 17 09:20:34 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 6.83"
[Tue Jan 17 11:07:16 2012] fullrun_pn_xmm0555780301_pi300-10000_cl_pass0_src45.ximg exists
[Tue Jan 17 11:07:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555780301_pi300-10000_cl_pass0_src45.csv
[Tue Jan 17 11:07:16 2012] fullrun_pn_xmm0555780301_pi300-10000_cl_pass0_src45_1.ximg exists
[Tue Jan 17 11:07:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555780301_pi300-10000_cl_pass0_src45.csv
[Tue Jan 17 11:07:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555780301_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555780301_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 11:07:17 2012] fullrun_pn_xmm0555780301_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Tue Jan 17 11:07:17 2012] fullrun_pn_xmm0555780301_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Tue Jan 17 11:07:17 2012] Fit fullrun_pn_xmm0555780301_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Tue Jan 17 12:50:02 2012] Source 49 is offset by 1.392153 and 5.491139 pixels which is larger than
2 X fitted extent = 3.015950 x 3.015950, not incorporating fit results
[Tue Jan 17 12:50:02 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 12:50:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 12:50:02 2012] Assessing source extent using major
[Tue Jan 17 12:50:02 2012] Source does appear to be extended
[Tue Jan 17 12:50:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 12:50:40 2012] Using EEF radius (= 6.83 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 12:50:40 2012] Initial guess for spatial extent in simple fitting = 6.83"
[Tue Jan 17 12:50:40 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.933
[Tue Jan 17 12:50:40 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 6.83"
[Tue Jan 17 15:38:07 2012] fullrun_pn_xmm0555780301_pi300-10000_cl_pass1_src43.ximg exists
[Tue Jan 17 15:38:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555780301_pi300-10000_cl_pass1_src43.csv
[Tue Jan 17 15:38:07 2012] fullrun_pn_xmm0555780301_pi300-10000_cl_pass1_src43_1.ximg exists
[Tue Jan 17 15:38:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555780301_pi300-10000_cl_pass1_src43.csv
[Tue Jan 17 15:38:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555780301_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555780301_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 15:38:08 2012] fullrun_pn_xmm0555780301_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Tue Jan 17 15:38:08 2012] fullrun_pn_xmm0555780301_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Tue Jan 17 15:38:08 2012] Fit fullrun_pn_xmm0555780301_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Tue Jan 17 17:05:24 2012] Spatial fit model total counts = 1484.310000, observed total counts = 1483.000000
[Tue Jan 17 17:05:24 2012] Offset between fit and detection position for source 49 = 5.865866 pixels
[Tue Jan 17 17:05:24 2012] 1411.496000 total counts/ 1011.500000 bgd. counts: snr = 12.576874
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 5.865866 pixels
  Position = (310.8, 307.7) = 3 32 29.01 -27 44 2.8
  Extent = 13.7 (13.6-27.3)", rotation angle = 0
  Source counts = 400.0 +/- 37.6
  Background counts = 1011.5
  Rate = 0.004 +/- 0.0004
[Tue Jan 17 17:05:24 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 17:05:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 17:05:24 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 17:05:24 2012] Source does appear to be extended
[Tue Jan 17 17:05:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 17:05:49 2012] XMMSAS src. selection expression = ellipse(26990.123600, 26725.624000, 819.630024, 819.630024, 0.000000, X, Y)
[Tue Jan 17 17:05:49 2012] Writing source region out to fullrun_pn_xmm0555780301_pi300-10000_pass1_cl_src49_src.reg
[Tue Jan 17 17:05:49 2012] Extracting stamp from image fullrun_pn_xmm0555780301_pi300-10000_cl_sm2.00.img.gz, (264, 261) - (358, 355)
[Tue Jan 17 17:05:49 2012] XMMSAS bgd. selection expression = annulus(26990.123600, 26725.624000, 1366.050039, 2732.100079, X, Y) && !ellipse(26685.451000, 25476.057600, 363.816810, 363.816810, 0.000000, X, Y) && !ellipse(28305.779175, 29872.939423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27645.104000, 30020.379000, 1336.792038, 1336.792038, 0.000000, X, Y) && !ellipse(25029.402000, 26613.394800, 448.872813, 448.872813, 0.000000, X, Y) && !ellipse(25979.344269, 24610.493469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24367.647010, 24282.952248, 553.567775, 500.335132, 103.006445, X, Y)
[Tue Jan 17 17:05:49 2012] Writing fullrun_pn_xmm0555780301_pi300-10000_pass1_cl_src49.gif
[Tue Jan 17 18:02:58 2012] Mean detx,y = (-1529.68, 2678.44) 
[Tue Jan 17 18:03:05 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 18:03:25 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 18:03:25 2012] Setting source spectrum file to fullrun_pn_xmm0555780301_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Tue Jan 17 18:03:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555780301_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Tue Jan 17 22:33:58 2012] Updating aperture counts using extracted products
[Tue Jan 17 22:33:58 2012] Error reading totcts from fullrun_pn_xmm0555780301_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Tue Jan 17 22:34:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 22:34:00 2012] Using photon index=1.80, rate=0.00391, arf fullrun_pn_xmm0555780301_pi300-10000_pass1_cl_src49.arf
[Tue Jan 17 22:34:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 22:34:01 2012] Updating source flux to 1.1e-14
[Tue Jan 17 22:37:38 2012] Flag b found in src. 49 procflags, skipping spectral fitting