[Thu Mar 15 11:09:39 2012] Detection parameters:
  Position = (371.4, 391.9) = 3 32 11.27 -27 37 28.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1402.8 +/- 51.2
  Background counts = 290.2
  Rate = 0.01 +/- 0.0004

[Thu Mar 15 11:09:43 2012] Off-axis axis estimate = 8.60'
[Thu Mar 15 11:20:40 2012] Using EEF radius (= 10.73 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 11:20:40 2012] Initial guess for spatial extent in simple fitting = 10.73"
[Thu Mar 15 11:20:40 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.023
[Thu Mar 15 11:20:40 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.73"
[Thu Mar 15 13:30:58 2012] fullrun_pn_xmm0555780101_pi300-10000_cl_pass0_src5.ximg exists
[Thu Mar 15 13:30:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555780101_pi300-10000_cl_pass0_src5.csv
[Thu Mar 15 13:30:58 2012] fullrun_pn_xmm0555780101_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Mar 15 13:30:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555780101_pi300-10000_cl_pass0_src5.csv
[Thu Mar 15 13:30:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555780101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555780101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 13:30:59 2012] fullrun_pn_xmm0555780101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Mar 15 13:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555780101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu Mar 15 13:30:59 2012] fullrun_pn_xmm0555780101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Mar 15 13:30:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555780101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu Mar 15 13:30:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555780101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555780101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 16:10:20 2012] Warning, spatial fit 5 centroid is now closest to src. 4
[Thu Mar 15 16:10:21 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:10:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:10:21 2012] Assessing source extent using major
[Thu Mar 15 16:10:21 2012] Source does appear to be extended
[Thu Mar 15 16:10:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 16:10:54 2012] Using EEF radius (= 10.73 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 16:10:54 2012] Initial guess for spatial extent in simple fitting = 10.73"
[Thu Mar 15 16:10:54 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.023
[Thu Mar 15 16:10:54 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.73"
[Thu Mar 15 17:54:25 2012] fullrun_pn_xmm0555780101_pi300-10000_cl_pass1_src5.ximg exists
[Thu Mar 15 17:54:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555780101_pi300-10000_cl_pass1_src5.csv
[Thu Mar 15 17:54:25 2012] fullrun_pn_xmm0555780101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Mar 15 17:54:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555780101_pi300-10000_cl_pass1_src5.csv
[Thu Mar 15 17:54:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555780101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555780101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 17:54:25 2012] fullrun_pn_xmm0555780101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Mar 15 17:54:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555780101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu Mar 15 17:54:25 2012] fullrun_pn_xmm0555780101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Mar 15 17:54:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555780101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu Mar 15 17:54:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555780101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555780101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 19:40:40 2012] Warning, spatial fit 5 centroid is now closest to src. 4
[Thu Mar 15 19:40:40 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 19:40:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 19:40:40 2012] Assessing source extent using major
[Thu Mar 15 19:40:40 2012] Source does appear to be extended
[Thu Mar 15 19:40:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 19:41:06 2012] Counts = 1402.814575, rescaling region sizes by 2.000000
[Thu Mar 15 19:41:06 2012] XMMSAS src. selection expression = ellipse(32265.258881, 34043.520508, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Mar 15 19:41:06 2012] Writing source region out to fullrun_pn_xmm0555780101_pi300-10000_pass1_cl_src6_src.reg
[Thu Mar 15 19:41:06 2012] Extracting stamp from image fullrun_pn_xmm0555780101_pi300-10000_cl_sm2.00.img.gz, (296, 317) - (446, 467)
[Thu Mar 15 19:41:06 2012] XMMSAS bgd. selection expression = annulus(32265.258881, 34043.520508, 4350.000000, 8700.000000, X, Y) && !ellipse(28147.658540, 29649.795800, 419.386412, 419.386412, 0.000000, X, Y) && !ellipse(33223.482849, 34059.487854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34280.516388, 34058.516113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31047.102234, 31542.474945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25198.339780, 31249.597200, 455.935213, 455.935213, 0.000000, X, Y) && !ellipse(28304.903015, 30217.875519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37753.318604, 29450.309204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40721.949341, 28678.991333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27307.017172, 24703.834607, 1166.384034, 428.115124, 90.000000, X, Y) && !ellipse(27704.224000, 36149.188000, 516.544815, 516.544815, 0.000000, X, Y) && !ellipse(24046.251953, 33034.389008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26191.585200, 31904.155600, 429.110412, 429.110412, 0.000000, X, Y) && !ellipse(30775.722800, 27296.137800, 449.836514, 449.836514, 0.000000, X, Y) && !ellipse(32554.140200, 27165.362800, 491.046414, 213.545606, 240.912000, X, Y) && !ellipse(38121.744000, 26936.260000, 422.250412, 422.250412, 0.000000, X, Y) && !ellipse(32417.376060, 25870.326600, 410.418412, 410.418412, 0.000000, X, Y) && !ellipse(31766.245800, 27738.324200, 426.699212, 426.699212, 0.000000, X, Y) && !ellipse(34904.997864, 26732.368988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25553.209000, 26032.712400, 416.425962, 416.425962, 0.000000, X, Y) && !ellipse(28257.571808, 36932.848175, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 15 19:41:06 2012] Writing fullrun_pn_xmm0555780101_pi300-10000_pass1_cl_src6.gif
[Thu Mar 15 19:48:33 2012] Mean detx,y = (-2893.47, 11626.35) 
[Thu Mar 15 19:48:41 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 15 19:51:11 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 15 19:51:12 2012] Setting source spectrum file to fullrun_pn_xmm0555780101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Mar 15 19:51:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555780101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Mar 15 20:59:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Mar 15 20:59:45 2012] rmf not generated due to insufficient counts
[Thu Mar 15 23:48:29 2012] Updating aperture counts using extracted products
[Thu Mar 15 23:48:29 2012] Error reading totcts from fullrun_pn_xmm0555780101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Mar 15 23:48:31 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 23:48:31 2012] Using photon index=1.80, rate=0.0109, arf fullrun_pn_xmm0555780101_pi300-10000_pass1_cl_src6.arf
[Thu Mar 15 23:48:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 23:48:31 2012] Updating source flux to 5.4e-14
[Thu Mar 15 23:50:51 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting