[Thu Mar 15 11:09:49 2012] Detection parameters:
  Position = (324.4, 341.2) = 3 32 26.65 -27 41 8.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2860.7 +/- 67.4
  Background counts = 186.7
  Rate = 0.03 +/- 0.0006

[Thu Mar 15 11:09:53 2012] Off-axis axis estimate = 3.63'
[Thu Mar 15 14:50:39 2012] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 14:50:39 2012] Initial guess for spatial extent in simple fitting = 8.24"
[Thu Mar 15 14:50:39 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.090
[Thu Mar 15 14:50:39 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.24"
[Thu Mar 15 16:10:00 2012] fullrun_mos2_xmm0555780101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Mar 15 16:10:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555780101_pi300-10000_cl_pass0_src1.csv
[Thu Mar 15 16:10:00 2012] fullrun_mos2_xmm0555780101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Mar 15 16:10:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555780101_pi300-10000_cl_pass0_src1.csv
[Thu Mar 15 16:10:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555780101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555780101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 16:10:01 2012] fullrun_mos2_xmm0555780101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Mar 15 16:10:01 2012] fullrun_mos2_xmm0555780101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Mar 15 16:10:01 2012] Fit fullrun_mos2_xmm0555780101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Mar 15 16:10:36 2012] Spatial fit model total counts = 3041.580000, observed total counts = 2932.000000
[Thu Mar 15 16:10:36 2012] Offset between fit and detection position for source 3 = 0.163669 pixels
[Thu Mar 15 16:10:36 2012] 3079.400000 total counts/ 1504.590000 bgd. counts: snr = 40.599350
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.163669 pixels
  Position = (324.3, 341.3) = 3 32 26.70 -27 41 8.4
  Extent = 4.6 (4.4-4.8)", rotation angle = 0
  Source counts = 1574.8 +/- 55.5
  Background counts = 1504.6
  Rate = 0.01 +/- 0.0005
[Thu Mar 15 16:10:36 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:10:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:10:36 2012] Assessing source extent using major axis lower bound
[Thu Mar 15 16:10:36 2012] Source does appear to be extended
[Thu Mar 15 16:10:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 18:50:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 15 18:50:33 2012] Initial guess for spatial extent in simple fitting = 4.64"
[Thu Mar 15 18:50:33 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.917
[Thu Mar 15 18:50:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.64"
[Thu Mar 15 19:40:29 2012] fullrun_mos2_xmm0555780101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Mar 15 19:40:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555780101_pi300-10000_cl_pass1_src1.csv
[Thu Mar 15 19:40:29 2012] fullrun_mos2_xmm0555780101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Mar 15 19:40:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555780101_pi300-10000_cl_pass1_src1.csv
[Thu Mar 15 19:40:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555780101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555780101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 19:40:29 2012] fullrun_mos2_xmm0555780101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Mar 15 19:40:29 2012] fullrun_mos2_xmm0555780101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Mar 15 19:40:29 2012] Fit fullrun_mos2_xmm0555780101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Mar 15 19:40:52 2012] Spatial fit model total counts = 3041.570000, observed total counts = 2932.000000
[Thu Mar 15 19:40:52 2012] Offset between fit and detection position for source 3 = 0.000000 pixels
[Thu Mar 15 19:40:52 2012] 3079.400000 total counts/ 1504.590000 bgd. counts: snr = 40.599350
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000000 pixels
  Position = (324.3, 341.3) = 3 32 26.70 -27 41 8.4
  Extent = 4.6 (4.4-4.8)", rotation angle = 0
  Source counts = 1574.8 +/- 55.5
  Background counts = 1504.6
  Rate = 0.01 +/- 0.0005
[Thu Mar 15 19:40:52 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 19:40:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 19:40:52 2012] Assessing source extent using major axis lower bound
[Thu Mar 15 19:40:52 2012] Source does appear to be extended
[Thu Mar 15 19:40:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 22:51:08 2012] Counts = 1574.810000, rescaling region sizes by 2.000000
[Thu Mar 15 22:51:08 2012] XMMSAS src. selection expression = ellipse(28163.089800, 29643.284400, 556.598416, 556.598416, 0.000000, X, Y)
[Thu Mar 15 22:51:08 2012] Writing source region out to fullrun_mos2_xmm0555780101_pi300-10000_pass1_cl_src3_src.reg
[Thu Mar 15 22:51:08 2012] Extracting stamp from image fullrun_mos2_xmm0555780101_pi300-10000_cl_sm2.00.img.gz, (292, 309) - (356, 373)
[Thu Mar 15 22:51:08 2012] XMMSAS bgd. selection expression = annulus(28163.089800, 29643.284400, 1855.328053, 3710.656107, X, Y) && !ellipse(25216.460800, 31240.677800, 423.907212, 322.304809, 22.561600, X, Y) && !ellipse(32260.015198, 34038.895447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31015.903680, 31546.392200, 390.578411, 390.578411, 0.000000, X, Y) && !ellipse(23991.784027, 33089.345459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32585.014679, 27240.501770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32404.937317, 25848.331848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26135.529022, 31946.379242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31929.549011, 27229.682526, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 15 22:51:08 2012] Writing fullrun_mos2_xmm0555780101_pi300-10000_pass1_cl_src3.gif
[Thu Mar 15 22:51:16 2012] Mean detx,y = (1380.94, -5983.08) 
[Thu Mar 15 22:51:18 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 15 22:51:41 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 15 22:51:41 2012] Setting source spectrum file to fullrun_mos2_xmm0555780101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Mar 15 22:51:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0555780101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Mar 15 23:48:33 2012] Updating aperture counts using extracted products
[Thu Mar 15 23:48:33 2012] Error reading totcts from fullrun_mos2_xmm0555780101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Mar 15 23:48:34 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 23:48:34 2012] Using photon index=1.80, rate=0.0135, arf fullrun_mos2_xmm0555780101_pi300-10000_pass1_cl_src3.arf
[Thu Mar 15 23:48:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 23:48:34 2012] Updating source flux to 1.7e-13
[Thu Mar 15 23:50:51 2012] Reading fit data from xmm0555780101/analysis//spectral/fullrun_mos2_xmm0555780101_pi300-10000_pass1_cl_src3_pl.csv
[Thu Mar 15 23:50:51 2012] Spectral fit parameter nH value = 4.16878e+19
[Thu Mar 15 23:50:51 2012] Spectral fit parameter PhoIndex value = 1.98427
[Thu Mar 15 23:50:51 2012] Failed to get F(0.3-8.0) from xmm0555780101/analysis//spectral/fullrun_mos2_xmm0555780101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Thu Mar 15 23:50:51 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 23:50:51 2012] Using Nh = 4.2e+19, photon index=1.98, rate=0.0135, arf fullrun_mos2_xmm0555780101_pi300-10000_pass1_cl_src3.arf
[Thu Mar 15 23:50:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 23:50:51 2012] Updating source flux to 1.6e-13