[Thu Mar 15 11:09:53 2012] Detection parameters:
  Position = (367.6, 313.5) = 3 32 12.51 -27 43 13.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.2 +/- 20.6
  Background counts = 175.3
  Rate = 0.0009 +/- 0.0002

[Thu Mar 15 11:09:53 2012] Off-axis axis estimate = 5.13'
[Thu Mar 15 14:50:39 2012] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 14:50:39 2012] Initial guess for spatial extent in simple fitting = 8.99"
[Thu Mar 15 14:50:39 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.948
[Thu Mar 15 14:50:39 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 8.99"
[Thu Mar 15 16:10:01 2012] fullrun_mos2_xmm0555780101_pi300-10000_cl_pass0_src36.ximg exists
[Thu Mar 15 16:10:01 2012] fullrun_mos2_xmm0555780101_pi300-10000_cl_pass0_src36_1.ximg exists
[Thu Mar 15 16:10:01 2012] Fit fullrun_mos2_xmm0555780101_pi300-10000_cl_pass0_src36 appears to have run properly
[Thu Mar 15 16:10:01 2012] fullrun_mos2_xmm0555780101_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Thu Mar 15 16:10:01 2012] fullrun_mos2_xmm0555780101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Thu Mar 15 16:10:01 2012] Fit fullrun_mos2_xmm0555780101_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Thu Mar 15 16:10:36 2012] Spatial fit model total counts = 678.321000, observed total counts = 593.000000
[Thu Mar 15 16:10:36 2012] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar 15 16:10:36 2012] Warning, spatial fit 36 centroid is now closest to src. 27
[Thu Mar 15 16:10:36 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:10:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:10:36 2012] Assessing source extent using major
[Thu Mar 15 16:10:36 2012] Source does appear to be extended
[Thu Mar 15 16:10:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 18:50:33 2012] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 18:50:33 2012] Initial guess for spatial extent in simple fitting = 8.99"
[Thu Mar 15 18:50:33 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.948
[Thu Mar 15 18:50:33 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 8.99"
[Thu Mar 15 19:40:29 2012] fullrun_mos2_xmm0555780101_pi300-10000_cl_pass1_src33.ximg exists
[Thu Mar 15 19:40:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0555780101_pi300-10000_cl_pass1_src33.csv
[Thu Mar 15 19:40:29 2012] fullrun_mos2_xmm0555780101_pi300-10000_cl_pass1_src33_1.ximg exists
[Thu Mar 15 19:40:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0555780101_pi300-10000_cl_pass1_src33.csv
[Thu Mar 15 19:40:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555780101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555780101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 19:40:29 2012] fullrun_mos2_xmm0555780101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Thu Mar 15 19:40:29 2012] fullrun_mos2_xmm0555780101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Thu Mar 15 19:40:29 2012] Fit fullrun_mos2_xmm0555780101_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Thu Mar 15 19:40:52 2012] Source 29 is offset by 1.252108 and -5.552776 pixels which is larger than
2 X fitted extent = 2.042368 x 2.042368, not incorporating fit results
[Thu Mar 15 19:40:52 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 19:40:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 19:40:52 2012] Assessing source extent using major
[Thu Mar 15 19:40:52 2012] Source does appear to be extended
[Thu Mar 15 19:40:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 22:51:09 2012] XMMSAS src. selection expression = ellipse(31929.549011, 27229.682526, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar 15 22:51:09 2012] Writing source region out to fullrun_mos2_xmm0555780101_pi300-10000_pass1_cl_src29_src.reg
[Thu Mar 15 22:51:09 2012] Extracting stamp from image fullrun_mos2_xmm0555780101_pi300-10000_cl_sm2.00.img.gz, (330, 276) - (405, 351)
[Thu Mar 15 22:51:09 2012] XMMSAS bgd. selection expression = annulus(31929.549011, 27229.682526, 1087.500000, 2175.000000, X, Y) && !ellipse(32585.014679, 27240.501770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32404.937317, 25848.331848, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 15 22:51:09 2012] Writing fullrun_mos2_xmm0555780101_pi300-10000_pass1_cl_src29.gif
[Thu Mar 15 23:04:18 2012] Mean detx,y = (5858.60, -5704.13) 
[Thu Mar 15 23:04:20 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 15 23:04:35 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 15 23:04:35 2012] Setting source spectrum file to fullrun_mos2_xmm0555780101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Thu Mar 15 23:04:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0555780101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Thu Mar 15 23:44:22 2012] Not generating rmf since there are only 87 counts
[Thu Mar 15 23:44:22 2012] rmf not generated due to insufficient counts
[Thu Mar 15 23:48:34 2012] Updating aperture counts using extracted products
[Thu Mar 15 23:48:34 2012] Error reading totcts from fullrun_mos2_xmm0555780101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Thu Mar 15 23:48:35 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 23:48:35 2012] Using photon index=1.80, rate=0.000942, arf fullrun_mos2_xmm0555780101_pi300-10000_pass1_cl_src29.arf
[Thu Mar 15 23:48:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 23:48:35 2012] Updating source flux to 1.4e-14
[Thu Mar 15 23:50:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting