[Thu Mar 15 11:09:48 2012] Detection parameters:
  Position = (258.1, 193.0) = 3 32 48.40 -27 51 53.3
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 173.9 +/- 18.8
  Background counts = 624.8
  Rate = 0.001 +/- 0.0001

[Thu Mar 15 11:09:48 2012] Off-axis axis estimate = 8.18'
[Thu Mar 15 13:31:00 2012] Using EEF radius (= 10.52 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 13:31:00 2012] Initial guess for spatial extent in simple fitting = 10.52"
[Thu Mar 15 13:31:00 2012] source mask rpix=2.4, npix_max = 34, mask sum = 24, frac = 0.705
[Thu Mar 15 13:31:00 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 10.52"
[Thu Mar 15 14:50:38 2012] fullrun_mos1_xmm0555780101_pi300-10000_cl_pass0_src23.ximg exists
[Thu Mar 15 14:50:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555780101_pi300-10000_cl_pass0_src23.csv
[Thu Mar 15 14:50:38 2012] fullrun_mos1_xmm0555780101_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu Mar 15 14:50:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555780101_pi300-10000_cl_pass0_src23.csv
[Thu Mar 15 14:50:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555780101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555780101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 14:50:39 2012] fullrun_mos1_xmm0555780101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu Mar 15 14:50:39 2012] fullrun_mos1_xmm0555780101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Mar 15 14:50:39 2012] Fit fullrun_mos1_xmm0555780101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Thu Mar 15 16:10:29 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 11.349908 pixels away
[Thu Mar 15 16:10:29 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:10:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:10:29 2012] Assessing source extent using major
[Thu Mar 15 16:10:29 2012] Source does appear to be extended
[Thu Mar 15 16:10:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 16:10:30 2012] Source is confused with source 36
[Thu Mar 15 17:54:26 2012] Using EEF radius (= 10.52 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 17:54:26 2012] Initial guess for spatial extent in simple fitting = 10.52"
[Thu Mar 15 17:54:26 2012] source mask rpix=2.4, npix_max = 34, mask sum = 24, frac = 0.705
[Thu Mar 15 17:54:26 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 10.52"
[Thu Mar 15 18:50:32 2012] fullrun_mos1_xmm0555780101_pi300-10000_cl_pass1_src23.ximg exists
[Thu Mar 15 18:50:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555780101_pi300-10000_cl_pass1_src23.csv
[Thu Mar 15 18:50:32 2012] fullrun_mos1_xmm0555780101_pi300-10000_cl_pass1_src23_1.ximg exists
[Thu Mar 15 18:50:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555780101_pi300-10000_cl_pass1_src23.csv
[Thu Mar 15 18:50:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555780101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555780101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 18:50:33 2012] fullrun_mos1_xmm0555780101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Thu Mar 15 18:50:33 2012] fullrun_mos1_xmm0555780101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Thu Mar 15 18:50:33 2012] Fit fullrun_mos1_xmm0555780101_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Thu Mar 15 19:40:46 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 28.147933 pixels away
[Thu Mar 15 19:40:46 2012] Source 35 is offset by -3.208105 and 4.749884 pixels which is larger than
2 X fitted extent = 1.882952 x 1.882952, not incorporating fit results
[Thu Mar 15 19:40:46 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 10.125953 pixels away
[Thu Mar 15 19:40:46 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 19:40:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 19:40:46 2012] Assessing source extent using major
[Thu Mar 15 19:40:46 2012] Source does appear to be extended
[Thu Mar 15 19:40:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 21:51:13 2012] XMMSAS src. selection expression = ellipse(22404.296875, 16746.021896, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Mar 15 21:51:13 2012] Writing source region out to fullrun_mos1_xmm0555780101_pi300-10000_pass1_cl_src35_src.reg
[Thu Mar 15 21:51:13 2012] Extracting stamp from image fullrun_mos1_xmm0555780101_pi300-10000_cl_sm2.00.img.gz, (183, 118) - (333, 268)
[Thu Mar 15 21:51:13 2012] XMMSAS bgd. selection expression = annulus(22404.296875, 16746.021896, 2175.000000, 4350.000000, X, Y) && !ellipse(17387.932312, 17131.562683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25261.018300, 16310.667800, 592.144017, 592.144017, 0.000000, X, Y) && !ellipse(22185.736191, 15613.365158, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(19175.215729, 12485.128662, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 15 21:51:13 2012] Writing fullrun_mos1_xmm0555780101_pi300-10000_pass1_cl_src35.gif
[Thu Mar 15 22:01:26 2012] Mean detx,y = (8351.27, -2557.29) 
[Thu Mar 15 22:01:28 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 15 22:02:18 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 15 22:02:18 2012] Setting source spectrum file to fullrun_mos1_xmm0555780101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Thu Mar 15 22:02:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0555780101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Thu Mar 15 22:47:57 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Mar 15 22:47:57 2012] rmf not generated due to insufficient counts
[Thu Mar 15 23:48:32 2012] Updating aperture counts using extracted products
[Thu Mar 15 23:48:32 2012] Error reading totcts from fullrun_mos1_xmm0555780101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Thu Mar 15 23:48:33 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 23:48:33 2012] Using photon index=1.80, rate=0.00131, arf fullrun_mos1_xmm0555780101_pi300-10000_pass1_cl_src35.arf
[Thu Mar 15 23:48:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 23:48:33 2012] Updating source flux to 2e-14
[Thu Mar 15 23:48:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting