[Thu Mar 15 11:09:47 2012] Detection parameters:
  Position = (218.5, 277.7) = 3 33 1.37 -27 45 43.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.3 +/- 23.9
  Background counts = 225.9
  Rate = 0.001 +/- 0.0002

[Thu Mar 15 11:09:48 2012] Off-axis axis estimate = 5.99'
[Thu Mar 15 13:31:00 2012] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 13:31:00 2012] Initial guess for spatial extent in simple fitting = 9.42"
[Thu Mar 15 13:31:00 2012] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.844
[Thu Mar 15 13:31:00 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 9.42"
[Thu Mar 15 14:50:38 2012] fullrun_mos1_xmm0555780101_pi300-10000_cl_pass0_src25.ximg exists
[Thu Mar 15 14:50:38 2012] fullrun_mos1_xmm0555780101_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu Mar 15 14:50:38 2012] Fit fullrun_mos1_xmm0555780101_pi300-10000_cl_pass0_src25 appears to have run properly
[Thu Mar 15 14:50:39 2012] fullrun_mos1_xmm0555780101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu Mar 15 14:50:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555780101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu Mar 15 14:50:39 2012] fullrun_mos1_xmm0555780101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu Mar 15 14:50:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555780101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu Mar 15 14:50:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555780101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555780101_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 16:10:29 2012] Spatial fit model total counts = 952.406000, observed total counts = 847.000000
[Thu Mar 15 16:10:29 2012] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar 15 16:10:29 2012] Warning, spatial fit 25 centroid is now closest to src. 21
[Thu Mar 15 16:10:29 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 16:10:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 16:10:29 2012] Assessing source extent using major
[Thu Mar 15 16:10:29 2012] Source does appear to be extended
[Thu Mar 15 16:10:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 17:54:26 2012] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 17:54:26 2012] Initial guess for spatial extent in simple fitting = 9.42"
[Thu Mar 15 17:54:26 2012] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.844
[Thu Mar 15 17:54:26 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 9.42"
[Thu Mar 15 18:50:32 2012] fullrun_mos1_xmm0555780101_pi300-10000_cl_pass1_src25.ximg exists
[Thu Mar 15 18:50:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555780101_pi300-10000_cl_pass1_src25.csv
[Thu Mar 15 18:50:32 2012] fullrun_mos1_xmm0555780101_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu Mar 15 18:50:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555780101_pi300-10000_cl_pass1_src25.csv
[Thu Mar 15 18:50:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555780101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555780101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 18:50:33 2012] fullrun_mos1_xmm0555780101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu Mar 15 18:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555780101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Thu Mar 15 18:50:33 2012] fullrun_mos1_xmm0555780101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu Mar 15 18:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555780101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Thu Mar 15 18:50:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555780101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555780101_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 19:40:46 2012] Source 23 is offset by 5.816680 and -5.073676 pixels which is larger than
2 X fitted extent = 1.978736 x 1.978736, not incorporating fit results
[Thu Mar 15 19:40:46 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 19:40:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 19:40:46 2012] Assessing source extent using major
[Thu Mar 15 19:40:46 2012] Source does appear to be extended
[Thu Mar 15 19:40:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 21:51:13 2012] XMMSAS src. selection expression = ellipse(18958.301163, 24111.146179, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar 15 21:51:13 2012] Writing source region out to fullrun_mos1_xmm0555780101_pi300-10000_pass1_cl_src23_src.reg
[Thu Mar 15 21:51:13 2012] Extracting stamp from image fullrun_mos1_xmm0555780101_pi300-10000_cl_sm2.00.img.gz, (181, 240) - (256, 315)
[Thu Mar 15 21:51:13 2012] XMMSAS bgd. selection expression = annulus(18958.301163, 24111.146179, 1087.500000, 2175.000000, X, Y) && !ellipse(19648.591400, 26538.091600, 353.095210, 353.095210, 0.000000, X, Y) && !ellipse(18441.757400, 24555.974080, 398.093611, 398.093611, 0.000000, X, Y) && !ellipse(15357.291565, 21338.521652, 1740.000000, 1740.000000, 0.000000, X, Y)
[Thu Mar 15 21:51:13 2012] Writing fullrun_mos1_xmm0555780101_pi300-10000_pass1_cl_src23.gif
[Thu Mar 15 22:02:53 2012] Mean detx,y = (3440.51, 3926.52) 
[Thu Mar 15 22:02:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 15 22:03:06 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 15 22:03:06 2012] Setting source spectrum file to fullrun_mos1_xmm0555780101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Mar 15 22:03:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0555780101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Thu Mar 15 22:48:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Mar 15 22:48:18 2012] rmf not generated due to insufficient counts
[Thu Mar 15 23:48:32 2012] Updating aperture counts using extracted products
[Thu Mar 15 23:48:32 2012] Error reading totcts from fullrun_mos1_xmm0555780101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Mar 15 23:48:33 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 23:48:33 2012] Using photon index=1.80, rate=0.00128, arf fullrun_mos1_xmm0555780101_pi300-10000_pass1_cl_src23.arf
[Thu Mar 15 23:48:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 23:48:33 2012] Updating source flux to 1.4e-14
[Thu Mar 15 23:48:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting