[Mon Jun 11 16:14:56 2012] Detection parameters:
  Position = (292.3, 275.1) = 9 24 56.02 13 20 51.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1063.5 +/- 40.4
  Background counts = 52.1
  Rate = 0.03 +/- 0.001

[Mon Jun 11 16:14:56 2012] Off-axis axis estimate = 1.75'
[Mon Jun 11 16:17:14 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 16:17:14 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Mon Jun 11 16:17:14 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.053
[Mon Jun 11 16:17:14 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.30"
[Mon Jun 11 17:16:44 2012] fullrun_pn_xmm0555740101_pi300-10000_cl_pass0_src5.ximg exists
[Mon Jun 11 17:16:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555740101_pi300-10000_cl_pass0_src5.csv
[Mon Jun 11 17:16:44 2012] fullrun_pn_xmm0555740101_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Jun 11 17:16:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555740101_pi300-10000_cl_pass0_src5.csv
[Mon Jun 11 17:16:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555740101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555740101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 17:16:44 2012] fullrun_pn_xmm0555740101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Jun 11 17:16:44 2012] fullrun_pn_xmm0555740101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Jun 11 17:16:44 2012] Fit fullrun_pn_xmm0555740101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Jun 11 18:07:49 2012] Spatial fit model total counts = 1430.140000, observed total counts = 1412.000000
[Mon Jun 11 18:07:49 2012] Offset between fit and detection position for source 5 = 0.045065 pixels
[Mon Jun 11 18:07:49 2012] 1434.501000 total counts/ 709.729000 bgd. counts: snr = 27.205401
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.045065 pixels
  Position = (292.3, 275.1) = 9 24 56.02 13 20 51.6
  Extent = 5.5 (5.1-5.9)", rotation angle = 0
  Source counts = 724.8 +/- 37.9
  Background counts = 709.7
  Rate = 0.02 +/- 0.0009
[Mon Jun 11 18:07:49 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 18:07:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 18:07:49 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 18:07:49 2012] Source does appear to be extended
[Mon Jun 11 18:07:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 18:08:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 11 18:08:05 2012] Initial guess for spatial extent in simple fitting = 5.47"
[Mon Jun 11 18:08:05 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.971
[Mon Jun 11 18:08:05 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 5.47"
[Mon Jun 11 19:05:24 2012] fullrun_pn_xmm0555740101_pi300-10000_cl_pass1_src5.ximg exists
[Mon Jun 11 19:05:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555740101_pi300-10000_cl_pass1_src5.csv
[Mon Jun 11 19:05:24 2012] fullrun_pn_xmm0555740101_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Jun 11 19:05:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555740101_pi300-10000_cl_pass1_src5.csv
[Mon Jun 11 19:05:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555740101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555740101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 19:05:24 2012] fullrun_pn_xmm0555740101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Jun 11 19:05:24 2012] fullrun_pn_xmm0555740101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Jun 11 19:05:24 2012] Fit fullrun_pn_xmm0555740101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Jun 11 19:53:41 2012] Spatial fit model total counts = 1430.830000, observed total counts = 1412.000000
[Mon Jun 11 19:53:41 2012] Offset between fit and detection position for source 5 = 0.000576 pixels
[Mon Jun 11 19:53:41 2012] 1435.200000 total counts/ 710.047000 bgd. counts: snr = 27.213606
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.000576 pixels
  Position = (292.3, 275.1) = 9 24 56.02 13 20 51.6
  Extent = 5.5 (5.1-5.9)", rotation angle = 0
  Source counts = 725.2 +/- 37.9
  Background counts = 710.0
  Rate = 0.02 +/- 0.0009
[Mon Jun 11 19:53:41 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 19:53:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 19:53:41 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 19:53:41 2012] Source does appear to be extended
[Mon Jun 11 19:53:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 19:53:56 2012] XMMSAS src. selection expression = ellipse(25384.323400, 23887.840000, 328.221609, 328.221609, 0.000000, X, Y)
[Mon Jun 11 19:53:56 2012] Writing source region out to fullrun_pn_xmm0555740101_pi300-10000_pass1_cl_src5_src.reg
[Mon Jun 11 19:53:56 2012] Extracting stamp from image fullrun_pn_xmm0555740101_pi300-10000_cl_sm2.00.img.gz, (273, 256) - (311, 294)
[Mon Jun 11 19:53:56 2012] XMMSAS bgd. selection expression = annulus(25384.323400, 23887.840000, 547.036016, 1094.072031, X, Y) && !ellipse(26650.400269, 22964.295654, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 11 19:53:56 2012] Writing fullrun_pn_xmm0555740101_pi300-10000_pass1_cl_src5.gif
[Mon Jun 11 19:57:00 2012] Mean detx,y = (79.19, -286.72) 
[Mon Jun 11 19:57:02 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 11 19:57:11 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 11 19:57:12 2012] Setting source spectrum file to fullrun_pn_xmm0555740101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jun 11 19:57:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555740101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Jun 11 21:47:31 2012] Updating aperture counts using extracted products
[Mon Jun 11 21:47:31 2012] Error reading totcts from fullrun_pn_xmm0555740101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jun 11 21:47:32 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 11 21:47:32 2012] Using photon index=1.80, rate=0.0163, arf fullrun_pn_xmm0555740101_pi300-10000_pass1_cl_src5.arf
[Mon Jun 11 21:47:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 11 21:47:32 2012] Updating source flux to 4.8e-14
[Mon Jun 11 21:49:45 2012] Reading fit data from xmm0555740101/analysis//spectral/fullrun_pn_xmm0555740101_pi300-10000_pass1_cl_src5_pl.csv
[Mon Jun 11 21:49:45 2012] Spectral fit parameter nH value = 7.97528e+21
[Mon Jun 11 21:49:45 2012] Spectral fit parameter PhoIndex value = 7.7702
[Mon Jun 11 21:49:45 2012] Failed to get F(0.3-8.0) from xmm0555740101/analysis//spectral/fullrun_pn_xmm0555740101_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Mon Jun 11 21:49:45 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 11 21:49:45 2012] Using Nh = 8e+21, photon index=7.77, rate=0.0163, arf fullrun_pn_xmm0555740101_pi300-10000_pass1_cl_src5.arf
[Mon Jun 11 21:49:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 11 21:49:45 2012] Updating source flux to 2.7e-14