[Mon Jun 11 16:14:56 2012] Detection parameters:
  Position = (314.2, 248.9) = 9 24 49.49 13 18 57.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 288.8 +/- 23.4
  Background counts = 52.3
  Rate = 0.009 +/- 0.0007

[Mon Jun 11 16:14:56 2012] Off-axis axis estimate = 3.77'
[Mon Jun 11 16:17:14 2012] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 16:17:14 2012] Initial guess for spatial extent in simple fitting = 8.31"
[Mon Jun 11 16:17:14 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.860
[Mon Jun 11 16:17:14 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 8.31"
[Mon Jun 11 17:16:44 2012] fullrun_pn_xmm0555740101_pi300-10000_cl_pass0_src17.ximg exists
[Mon Jun 11 17:16:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555740101_pi300-10000_cl_pass0_src17.csv
[Mon Jun 11 17:16:44 2012] fullrun_pn_xmm0555740101_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Jun 11 17:16:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555740101_pi300-10000_cl_pass0_src17.csv
[Mon Jun 11 17:16:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555740101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555740101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 17:16:45 2012] fullrun_pn_xmm0555740101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Jun 11 17:16:45 2012] fullrun_pn_xmm0555740101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Jun 11 17:16:45 2012] Fit fullrun_pn_xmm0555740101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Mon Jun 11 18:07:49 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 11.445068 pixels away
[Mon Jun 11 18:07:49 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 18:07:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 18:07:49 2012] Assessing source extent using major
[Mon Jun 11 18:07:49 2012] Source does appear to be extended
[Mon Jun 11 18:07:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 18:08:05 2012] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 18:08:05 2012] Initial guess for spatial extent in simple fitting = 8.31"
[Mon Jun 11 18:08:05 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.860
[Mon Jun 11 18:08:05 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 8.31"
[Mon Jun 11 19:05:24 2012] fullrun_pn_xmm0555740101_pi300-10000_cl_pass1_src17.ximg exists
[Mon Jun 11 19:05:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555740101_pi300-10000_cl_pass1_src17.csv
[Mon Jun 11 19:05:24 2012] fullrun_pn_xmm0555740101_pi300-10000_cl_pass1_src17_1.ximg exists
[Mon Jun 11 19:05:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555740101_pi300-10000_cl_pass1_src17.csv
[Mon Jun 11 19:05:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555740101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555740101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 19:05:25 2012] fullrun_pn_xmm0555740101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Mon Jun 11 19:05:25 2012] fullrun_pn_xmm0555740101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Mon Jun 11 19:05:25 2012] Fit fullrun_pn_xmm0555740101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Mon Jun 11 19:53:41 2012] Spatial fit model total counts = 778.162000, observed total counts = 782.000000
[Mon Jun 11 19:53:41 2012] Offset between fit and detection position for source 17 = 0.049579 pixels
[Mon Jun 11 19:53:41 2012] 772.250000 total counts/ 584.500000 bgd. counts: snr = 7.765827
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.049579 pixels
  Position = (314.3, 248.9) = 9 24 49.48 13 18 57.4
  Extent = 5.1 (4.2-5.8)", rotation angle = 0
  Source counts = 187.8 +/- 27.8
  Background counts = 584.5
  Rate = 0.004 +/- 0.0006
[Mon Jun 11 19:53:41 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 19:53:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 19:53:41 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 19:53:41 2012] Source does appear to be extended
[Mon Jun 11 19:53:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 19:53:56 2012] XMMSAS src. selection expression = ellipse(27293.651800, 21604.050200, 306.274209, 306.274209, 0.000000, X, Y)
[Mon Jun 11 19:53:56 2012] Writing source region out to fullrun_pn_xmm0555740101_pi300-10000_pass1_cl_src17_src.reg
[Mon Jun 11 19:53:56 2012] Extracting stamp from image fullrun_pn_xmm0555740101_pi300-10000_cl_sm2.00.img.gz, (297, 231) - (332, 266)
[Mon Jun 11 19:53:56 2012] XMMSAS bgd. selection expression = annulus(27293.651800, 21604.050200, 510.457015, 1020.914029, X, Y) && !ellipse(27434.934875, 23308.605164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26650.400269, 22964.295654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26910.757751, 20805.521866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27355.069600, 19923.529800, 856.144025, 856.144025, 0.000000, X, Y)
[Mon Jun 11 19:53:56 2012] Writing fullrun_pn_xmm0555740101_pi300-10000_pass1_cl_src17.gif
[Mon Jun 11 20:03:10 2012] Mean detx,y = (-1024.46, -3056.78) 
[Mon Jun 11 20:03:12 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 11 20:03:20 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 11 20:03:20 2012] Setting source spectrum file to fullrun_pn_xmm0555740101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Jun 11 20:03:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555740101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon Jun 11 21:47:31 2012] Updating aperture counts using extracted products
[Mon Jun 11 21:47:31 2012] Error reading totcts from fullrun_pn_xmm0555740101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Jun 11 21:47:32 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 11 21:47:32 2012] Using photon index=1.80, rate=0.00423, arf fullrun_pn_xmm0555740101_pi300-10000_pass1_cl_src17.arf
[Mon Jun 11 21:47:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 11 21:47:32 2012] Updating source flux to 1.6e-14