[Mon Jun 11 16:15:10 2012] Detection parameters:
  Position = (480.2, 309.0) = 9 24 0.00 13 23 18.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 568.0 +/- 29.0
  Background counts = 14.7
  Rate = 0.01 +/- 0.0006

[Mon Jun 11 16:15:10 2012] Off-axis axis estimate = 13.20'
[Mon Jun 11 17:16:46 2012] Using EEF radius (= 13.03 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 17:16:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 11 17:16:46 2012] Initial guess for spatial extent in simple fitting = 13.03"
[Mon Jun 11 17:16:46 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.003
[Mon Jun 11 17:16:46 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.03"
[Mon Jun 11 17:31:31 2012] fullrun_mos1_xmm0555740101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 11 17:31:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555740101_pi300-10000_cl_pass0_src1.csv
[Mon Jun 11 17:31:31 2012] fullrun_mos1_xmm0555740101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 11 17:31:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555740101_pi300-10000_cl_pass0_src1.csv
[Mon Jun 11 17:31:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555740101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555740101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 17:31:31 2012] fullrun_mos1_xmm0555740101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 11 17:31:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555740101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 11 17:31:31 2012] fullrun_mos1_xmm0555740101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 11 17:31:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555740101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 11 17:31:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555740101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555740101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 18:07:51 2012] Spatial fit model total counts = 954.152000, observed total counts = 828.000000
[Mon Jun 11 18:07:51 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 11 18:07:51 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 18:07:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 18:07:51 2012] Assessing source extent using major
[Mon Jun 11 18:07:51 2012] Source does appear to be extended
[Mon Jun 11 18:07:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 19:05:25 2012] Using EEF radius (= 13.03 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 19:05:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 11 19:05:25 2012] Initial guess for spatial extent in simple fitting = 13.03"
[Mon Jun 11 19:05:25 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.003
[Mon Jun 11 19:05:25 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.03"
[Mon Jun 11 19:20:58 2012] fullrun_mos1_xmm0555740101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 11 19:20:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555740101_pi300-10000_cl_pass1_src1.csv
[Mon Jun 11 19:20:58 2012] fullrun_mos1_xmm0555740101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 11 19:20:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555740101_pi300-10000_cl_pass1_src1.csv
[Mon Jun 11 19:20:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555740101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555740101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 19:20:58 2012] fullrun_mos1_xmm0555740101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 11 19:20:58 2012] fullrun_mos1_xmm0555740101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 11 19:20:58 2012] Fit fullrun_mos1_xmm0555740101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jun 11 19:53:43 2012] Spatial fit model total counts = 903.126000, observed total counts = 828.000000
[Mon Jun 11 19:53:43 2012] Offset between fit and detection position for source 5 = 0.411454 pixels
[Mon Jun 11 19:53:43 2012] 906.510000 total counts/ 510.081000 bgd. counts: snr = 17.552777
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.411454 pixels
  Position = (479.8, 309.0) = 9 24 0.12 13 23 18.5
  Extent = 7.0 (6.4-7.8)", rotation angle = 0
  Source counts = 396.4 +/- 30.1
  Background counts = 510.1
  Rate = 0.009 +/- 0.0007
[Mon Jun 11 19:53:43 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 19:53:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 19:53:43 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 19:53:43 2012] Source does appear to be extended
[Mon Jun 11 19:53:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 20:55:15 2012] XMMSAS src. selection expression = ellipse(41697.276340, 26832.961600, 417.438012, 417.438012, 0.000000, X, Y)
[Mon Jun 11 20:55:15 2012] Writing source region out to fullrun_mos1_xmm0555740101_pi300-10000_pass1_cl_src5_src.reg
[Mon Jun 11 20:55:15 2012] Extracting stamp from image fullrun_mos1_xmm0555740101_pi300-10000_cl_sm2.00.img.gz, (456, 285) - (504, 333)
[Mon Jun 11 20:55:15 2012] XMMSAS bgd. selection expression = annulus(41697.276340, 26832.961600, 695.730020, 1391.460040, X, Y)
[Mon Jun 11 20:55:15 2012] Writing fullrun_mos1_xmm0555740101_pi300-10000_pass1_cl_src5.gif
[Mon Jun 11 20:55:17 2012] Mean detx,y = (2573.12, -16659.56) 
[Mon Jun 11 20:55:18 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 11 20:55:24 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 11 20:55:24 2012] Setting source spectrum file to fullrun_mos1_xmm0555740101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jun 11 20:55:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0555740101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Jun 11 21:47:32 2012] Updating aperture counts using extracted products
[Mon Jun 11 21:47:32 2012] Error reading totcts from fullrun_mos1_xmm0555740101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jun 11 21:47:32 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 11 21:47:32 2012] Using photon index=1.80, rate=0.00862, arf fullrun_mos1_xmm0555740101_pi300-10000_pass1_cl_src5.arf
[Mon Jun 11 21:47:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 11 21:47:32 2012] Updating source flux to 3.4e-13
[Mon Jun 11 21:47:34 2012] Flag p found in src. 5 procflags, skipping spectral fitting
[Mon Jun 11 21:48:07 2012] Reading fit data from xmm0555740101/analysis//spectral/fullrun_mos1_xmm0555740101_pi300-10000_pass1_cl_src5_pl.csv
[Mon Jun 11 21:48:07 2012] Spectral fit parameter nH value = 8.7257e+21
[Mon Jun 11 21:48:07 2012] Spectral fit parameter PhoIndex value = 7.80516
[Mon Jun 11 21:48:07 2012] Failed to get F(0.3-8.0) from xmm0555740101/analysis//spectral/fullrun_mos1_xmm0555740101_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Mon Jun 11 21:48:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 11 21:48:07 2012] Using Nh = 8.7e+21, photon index=7.81, rate=0.00862, arf fullrun_mos1_xmm0555740101_pi300-10000_pass1_cl_src5.arf
[Mon Jun 11 21:48:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 11 21:48:07 2012] Updating source flux to 1.9e-13