[Fri Jul 27 14:22:30 2012] Detection parameters:
  Position = (479.7, 343.6) = 14 16 54.25 -60 53 0.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.1 +/- 22.2
  Background counts = 129.8
  Rate = 0.0009 +/- 0.0002

[Fri Jul 27 14:22:32 2012] Off-axis axis estimate = 13.54'
[Fri Jul 27 15:23:38 2012] Using EEF radius (= 13.20 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 15:23:38 2012] Initial guess for spatial extent in simple fitting = 13.20"
[Fri Jul 27 15:23:38 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.981
[Fri Jul 27 15:23:38 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 13.20"
[Fri Jul 27 17:15:14 2012] fullrun_mos1_xmm0555700101_pi300-10000_cl_pass0_src32.ximg exists
[Fri Jul 27 17:15:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555700101_pi300-10000_cl_pass0_src32.csv
[Fri Jul 27 17:15:14 2012] fullrun_mos1_xmm0555700101_pi300-10000_cl_pass0_src32_1.ximg exists
[Fri Jul 27 17:15:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555700101_pi300-10000_cl_pass0_src32.csv
[Fri Jul 27 17:15:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555700101_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555700101_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 17:15:14 2012] fullrun_mos1_xmm0555700101_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Fri Jul 27 17:15:14 2012] fullrun_mos1_xmm0555700101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Fri Jul 27 17:15:14 2012] Fit fullrun_mos1_xmm0555700101_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Fri Jul 27 18:30:58 2012] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.091125 pixels away
[Fri Jul 27 18:30:58 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 18:30:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 18:30:58 2012] Assessing source extent using major
[Fri Jul 27 18:30:58 2012] Source does appear to be extended
[Fri Jul 27 18:30:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 18:30:58 2012] Source is confused with source 3
[Fri Jul 27 18:48:57 2012] Using EEF radius (= 13.20 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 18:48:57 2012] Initial guess for spatial extent in simple fitting = 13.20"
[Fri Jul 27 18:48:57 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.981
[Fri Jul 27 18:48:57 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 13.20"
[Fri Jul 27 20:14:40 2012] fullrun_mos1_xmm0555700101_pi300-10000_cl_pass1_src30.ximg exists
[Fri Jul 27 20:14:40 2012] fullrun_mos1_xmm0555700101_pi300-10000_cl_pass1_src30_1.ximg exists
[Fri Jul 27 20:14:40 2012] Fit fullrun_mos1_xmm0555700101_pi300-10000_cl_pass1_src30 appears to have run properly
[Fri Jul 27 20:14:40 2012] fullrun_mos1_xmm0555700101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Fri Jul 27 20:14:40 2012] fullrun_mos1_xmm0555700101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Fri Jul 27 20:14:40 2012] Fit fullrun_mos1_xmm0555700101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Fri Jul 27 21:21:09 2012] Source 5 is offset by -0.897723 and 7.044791 pixels which is larger than
2 X fitted extent = 2.948179 x 2.948179, not incorporating fit results
[Fri Jul 27 21:21:09 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 21:21:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 21:21:09 2012] Assessing source extent using major
[Fri Jul 27 21:21:09 2012] Source does appear to be extended
[Fri Jul 27 21:21:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 00:49:39 2012] XMMSAS src. selection expression = ellipse(41685.825867, 29841.142792, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 28 00:49:39 2012] Writing source region out to fullrun_mos1_xmm0555700101_pi300-10000_pass1_cl_src5_src.reg
[Sat Jul 28 00:49:39 2012] Extracting stamp from image fullrun_mos1_xmm0555700101_pi300-10000_cl_sm2.00.img.gz, (442, 306) - (517, 381)
[Sat Jul 28 00:49:39 2012] XMMSAS bgd. selection expression = annulus(41685.825867, 29841.142792, 1087.500000, 2175.000000, X, Y) && !ellipse(42311.778229, 27773.379425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42708.044006, 28902.839508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42167.190643, 29772.162476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42374.662598, 28515.924744, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 28 00:49:39 2012] Writing fullrun_mos1_xmm0555700101_pi300-10000_pass1_cl_src5.gif
[Sat Jul 28 01:04:26 2012] Mean detx,y = (3652.70, -16804.65) 
[Sat Jul 28 01:04:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 01:04:39 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 01:04:39 2012] Setting source spectrum file to fullrun_mos1_xmm0555700101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jul 28 01:04:39 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0555700101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Jul 28 01:41:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 28 01:41:47 2012] rmf not generated due to insufficient counts
[Sat Jul 28 02:58:03 2012] Updating aperture counts using extracted products
[Sat Jul 28 02:58:03 2012] Error reading totcts from fullrun_mos1_xmm0555700101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jul 28 02:58:04 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 02:58:04 2012] Using photon index=1.80, rate=0.000938, arf fullrun_mos1_xmm0555700101_pi300-10000_pass1_cl_src5.arf
[Sat Jul 28 02:58:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 02:58:04 2012] Updating source flux to 3.4e-14
[Sat Jul 28 02:58:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting