[Fri Jul 27 14:22:32 2012] Detection parameters: Position = (218.5, 205.4) = 14 19 30.17 -61 3 1.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 195.9 +/- 24.7 Background counts = 231.9 Rate = 0.002 +/- 0.0003 [Fri Jul 27 14:22:32 2012] Off-axis axis estimate = 8.89' [Fri Jul 27 15:23:38 2012] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting [Fri Jul 27 15:23:38 2012] Initial guess for spatial extent in simple fitting = 10.88" [Fri Jul 27 15:23:38 2012] source mask rpix=2.5, npix_max = 36, mask sum = 35, frac = 0.972 [Fri Jul 27 15:23:38 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.88" [Fri Jul 27 17:15:13 2012] fullrun_mos1_xmm0555700101_pi300-10000_cl_pass0_src9.ximg exists [Fri Jul 27 17:15:13 2012] fullrun_mos1_xmm0555700101_pi300-10000_cl_pass0_src9_1.ximg exists [Fri Jul 27 17:15:13 2012] Fit fullrun_mos1_xmm0555700101_pi300-10000_cl_pass0_src9 appears to have run properly [Fri Jul 27 17:15:14 2012] fullrun_mos1_xmm0555700101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists [Fri Jul 27 17:15:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555700101_pi300-10000_cl_pass0_tfrozen_src9.csv [Fri Jul 27 17:15:14 2012] fullrun_mos1_xmm0555700101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists [Fri Jul 27 17:15:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555700101_pi300-10000_cl_pass0_tfrozen_src9.csv [Fri Jul 27 17:15:14 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0555700101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0555700101_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jul 27 18:30:58 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 14.672351 pixels away [Fri Jul 27 18:30:58 2012] Spatial fit model total counts = 937.247000, observed total counts = 941.000000 [Fri Jul 27 18:30:58 2012] Offset between fit and detection position for source 31 = 1.193870 pixels [Fri Jul 27 18:30:58 2012] Warning, changing simple spatial fit ID from 9 to 10 [Fri Jul 27 18:30:58 2012] 951.820830 total counts/ 949.343000 bgd. counts: snr = 0.080419 Spatial fit parameters: Offset between fit and detection position for source 31 = 1.193870 pixels Position = (218.1, 206.5) = 14 19 30.40 -61 2 56.8 Extent = 2.8 (2.8-2.8)", rotation angle = 0 Source counts = 2.5 +/- 30.9 Background counts = 949.3 Rate = 2e-05 +/- 0.0003 Deleting source due to low Poisson probability