[Fri Jul 27 14:22:31 2012] Detection parameters:
  Position = (269.2, 262.2) = 14 18 59.76 -60 58 55.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.2 +/- 26.6
  Background counts = 308.0
  Rate = 0.001 +/- 0.0002

[Fri Jul 27 14:22:32 2012] Off-axis axis estimate = 3.38'
[Fri Jul 27 15:23:38 2012] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 15:23:38 2012] Initial guess for spatial extent in simple fitting = 8.12"
[Fri Jul 27 15:23:38 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.117
[Fri Jul 27 15:23:38 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 8.12"
[Fri Jul 27 17:15:13 2012] fullrun_mos1_xmm0555700101_pi300-10000_cl_pass0_src29.ximg exists
[Fri Jul 27 17:15:13 2012] fullrun_mos1_xmm0555700101_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri Jul 27 17:15:13 2012] Fit fullrun_mos1_xmm0555700101_pi300-10000_cl_pass0_src29 appears to have run properly
[Fri Jul 27 17:15:14 2012] fullrun_mos1_xmm0555700101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri Jul 27 17:15:14 2012] fullrun_mos1_xmm0555700101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri Jul 27 17:15:14 2012] Fit fullrun_mos1_xmm0555700101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Fri Jul 27 18:30:58 2012] Spatial fit model total counts = 1400.170000, observed total counts = 1404.000000
[Fri Jul 27 18:30:58 2012] Offset between fit and detection position for source 26 = 0.390862 pixels
[Fri Jul 27 18:30:58 2012] 1413.698000 total counts/ 1304.450000 bgd. counts: snr = 3.024822
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.390862 pixels
  Position = (269.3, 262.6) = 14 18 59.72 -60 58 53.3
  Extent = 7.1 (4.8-9.9)", rotation angle = 0
  Source counts = 109.2 +/- 37.6
  Background counts = 1304.5
  Rate = 0.001 +/- 0.0004
[Fri Jul 27 18:30:58 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 18:30:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 18:30:58 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 18:30:58 2012] Source does appear to be extended
[Fri Jul 27 18:30:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 18:48:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 27 18:48:57 2012] Initial guess for spatial extent in simple fitting = 7.07"
[Fri Jul 27 18:48:57 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.106
[Fri Jul 27 18:48:57 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 7.07"
[Fri Jul 27 20:14:40 2012] fullrun_mos1_xmm0555700101_pi300-10000_cl_pass1_src27.ximg exists
[Fri Jul 27 20:14:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555700101_pi300-10000_cl_pass1_src27.csv
[Fri Jul 27 20:14:40 2012] fullrun_mos1_xmm0555700101_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri Jul 27 20:14:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555700101_pi300-10000_cl_pass1_src27.csv
[Fri Jul 27 20:14:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555700101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555700101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 20:14:40 2012] fullrun_mos1_xmm0555700101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri Jul 27 20:14:40 2012] fullrun_mos1_xmm0555700101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Jul 27 20:14:40 2012] Fit fullrun_mos1_xmm0555700101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Fri Jul 27 21:21:09 2012] Spatial fit model total counts = 1404.000000, observed total counts = 1404.000000
[Fri Jul 27 21:21:09 2012] Offset between fit and detection position for source 26 = 0.021846 pixels
[Fri Jul 27 21:21:09 2012] 1418.183000 total counts/ 1308.190000 bgd. counts: snr = 3.041093
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.021846 pixels
  Position = (269.3, 262.6) = 14 18 59.72 -60 58 53.4
  Extent = 7.0 (4.8-9.8)", rotation angle = 0
  Source counts = 110.0 +/- 37.7
  Background counts = 1308.2
  Rate = 0.001 +/- 0.0004
[Fri Jul 27 21:21:09 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 21:21:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 21:21:09 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 21:21:09 2012] Source does appear to be extended
[Fri Jul 27 21:21:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 00:49:39 2012] XMMSAS src. selection expression = ellipse(23379.608200, 22793.665600, 421.504812, 421.504812, 0.000000, X, Y)
[Sat Jul 28 00:49:39 2012] Writing source region out to fullrun_mos1_xmm0555700101_pi300-10000_pass1_cl_src26_src.reg
[Sat Jul 28 00:49:39 2012] Extracting stamp from image fullrun_mos1_xmm0555700101_pi300-10000_cl_sm2.00.img.gz, (245, 238) - (294, 287)
[Sat Jul 28 00:49:39 2012] XMMSAS bgd. selection expression = annulus(23379.608200, 22793.665600, 702.508020, 1405.016040, X, Y) && !ellipse(22088.360000, 23632.580000, 322.988009, 322.988009, 0.000000, X, Y)
[Sat Jul 28 00:49:39 2012] Writing fullrun_mos1_xmm0555700101_pi300-10000_pass1_cl_src26.gif
[Sat Jul 28 01:03:31 2012] Mean detx,y = (-111.97, 2437.05) 
[Sat Jul 28 01:03:33 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 01:03:40 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 01:03:40 2012] Setting source spectrum file to fullrun_mos1_xmm0555700101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat Jul 28 01:03:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0555700101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sat Jul 28 02:58:03 2012] Updating aperture counts using extracted products
[Sat Jul 28 02:58:03 2012] Error reading totcts from fullrun_mos1_xmm0555700101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat Jul 28 02:58:04 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 02:58:04 2012] Using photon index=1.80, rate=0.00105, arf fullrun_mos1_xmm0555700101_pi300-10000_pass1_cl_src26.arf
[Sat Jul 28 02:58:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 02:58:04 2012] Updating source flux to 1.2e-14