[Mon May 28 19:19:07 2012] Detection parameters:
  Position = (213.4, 323.7) = 15 18 39.59 -61 53 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.1 +/- 20.4
  Background counts = 147.6
  Rate = 0.007 +/- 0.002

[Mon May 28 19:19:07 2012] Off-axis axis estimate = 6.43'
[Mon May 28 19:44:54 2012] Using EEF radius (= 9.64 ")to estimate initial spatial extent for simple fitting
[Mon May 28 19:44:54 2012] Initial guess for spatial extent in simple fitting = 9.64"
[Mon May 28 19:44:54 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.847
[Mon May 28 19:44:54 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 9.64"
[Mon May 28 20:11:55 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_src8.ximg exists
[Mon May 28 20:11:55 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_src8_1.ximg exists
[Mon May 28 20:11:55 2012] Fit fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_src8 appears to have run properly
[Mon May 28 20:11:55 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Mon May 28 20:11:55 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Mon May 28 20:11:55 2012] Fit fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Mon May 28 20:12:02 2012] Spatial fit model total counts = 509.238000, observed total counts = 444.000000
[Mon May 28 20:12:02 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 28 20:12:02 2012] Spatial fit model total counts = 558.998000, observed total counts = 559.000000
[Mon May 28 20:12:02 2012] Offset between fit and detection position for source 9 = 3.792650 pixels
[Mon May 28 20:12:02 2012] 487.453200 total counts/ 412.547000 bgd. counts: snr = 3.687916
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 3.792650 pixels
  Position = (217.2, 323.7) = 15 18 37.25 -61 53 52.5
  Extent = 13.8 (2.9-19.3)", rotation angle = 0
  Source counts = 74.9 +/- 22.1
  Background counts = 412.5
  Rate = 0.01 +/- 0.004
[Mon May 28 20:12:02 2012] Vigneting correction estimate = 1.000000
[Mon May 28 20:12:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 20:12:02 2012] Assessing source extent using major axis lower bound
[Mon May 28 20:12:02 2012] Source does appear to be extended
[Mon May 28 20:12:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 20:12:02 2012] Source is confused with source 6
[Mon May 28 21:04:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 21:04:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 28 21:04:31 2012] Initial guess for spatial extent in simple fitting = 13.78"
[Mon May 28 21:04:31 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.911
[Mon May 28 21:04:31 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 13.78"
[Mon May 28 21:39:12 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_src8.ximg exists
[Mon May 28 21:39:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_src8.csv
[Mon May 28 21:39:12 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_src8_1.ximg exists
[Mon May 28 21:39:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_src8.csv
[Mon May 28 21:39:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 21:39:12 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Mon May 28 21:39:12 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Mon May 28 21:39:12 2012] Fit fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Mon May 28 21:39:16 2012] Warning, spatial fit 8 centroid is now closest to src. 6
[Mon May 28 21:39:16 2012] Source 9 is offset by 1.153885 and 7.771913 pixels which is larger than
2 X fitted extent = 1.134680 x 1.134680, not incorporating fit results
[Mon May 28 21:39:16 2012] Vigneting correction estimate = 1.000000
[Mon May 28 21:39:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 21:39:16 2012] Assessing source extent using major axis lower bound
[Mon May 28 21:39:16 2012] Source does appear to be extended
[Mon May 28 21:39:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 21:48:57 2012] XMMSAS src. selection expression = ellipse(18850.624000, 28112.920400, 826.656024, 826.656024, 0.000000, X, Y)
[Mon May 28 21:48:57 2012] Writing source region out to fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src9_src.reg
[Mon May 28 21:48:57 2012] Extracting stamp from image fullrun_mos2_xmm0555690901_pi300-10000_cl_sm2.00.img.gz, (170, 276) - (265, 371)
[Mon May 28 21:48:57 2012] XMMSAS bgd. selection expression = annulus(18850.624000, 28112.920400, 1377.760040, 2755.520079, X, Y) && !ellipse(18725.723251, 28904.947601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17850.660000, 28637.008400, 1045.208030, 1045.208030, 0.000000, X, Y) && !ellipse(17966.821625, 28174.732239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19523.686996, 29155.348724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20873.242371, 29096.014130, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 21:48:57 2012] Writing fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src9.gif
[Mon May 28 21:51:22 2012] Mean detx,y = (-5278.25, -5237.94) 
[Mon May 28 21:51:24 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 21:51:43 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 21:51:43 2012] Setting source spectrum file to fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon May 28 21:51:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Mon May 28 21:59:01 2012] Not generating rmf since there are only 74 counts
[Mon May 28 21:59:01 2012] rmf not generated due to insufficient counts
[Mon May 28 22:01:03 2012] Updating aperture counts using extracted products
[Mon May 28 22:01:03 2012] Error reading totcts from fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon May 28 22:01:03 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:01:03 2012] Using photon index=1.80, rate=0.013, arf fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src9.arf
[Mon May 28 22:01:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:01:03 2012] Updating source flux to 1.6e-13
[Mon May 28 22:01:28 2012] Flag b found in src. 9 procflags, skipping spectral fitting
[Mon May 28 22:01:28 2012] Flag p found in src. 9 procflags, skipping spectral fitting
[Mon May 28 22:01:28 2012] Flag c found in src. 9 procflags, skipping spectral fitting
[Mon May 28 22:01:28 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting