[Mon May 28 19:19:07 2012] Detection parameters:
  Position = (210.0, 330.5) = 15 18 41.72 -61 53 19.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.5 +/- 19.4
  Background counts = 140.2
  Rate = 0.007 +/- 0.002

[Mon May 28 19:19:07 2012] Off-axis axis estimate = 6.82'
[Mon May 28 19:44:54 2012] Using EEF radius (= 9.84 ")to estimate initial spatial extent for simple fitting
[Mon May 28 19:44:54 2012] Initial guess for spatial extent in simple fitting = 9.84"
[Mon May 28 19:44:54 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.983
[Mon May 28 19:44:54 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.84"
[Mon May 28 20:11:55 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_src6.ximg exists
[Mon May 28 20:11:55 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon May 28 20:11:55 2012] Fit fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_src6 appears to have run properly
[Mon May 28 20:11:55 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon May 28 20:11:55 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon May 28 20:11:55 2012] Fit fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Mon May 28 20:12:02 2012] Spatial fit model total counts = 538.996000, observed total counts = 519.000000
[Mon May 28 20:12:02 2012] Offset between fit and detection position for source 7 = 4.289218 pixels
[Mon May 28 20:12:02 2012] 520.983400 total counts/ 448.797000 bgd. counts: snr = 3.407457
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 4.289218 pixels
  Position = (205.7, 329.7) = 15 18 44.32 -61 53 26.1
  Extent = 13.1 (3.6-19.7)", rotation angle = 0
  Source counts = 72.2 +/- 22.8
  Background counts = 448.8
  Rate = 0.01 +/- 0.004
[Mon May 28 20:12:02 2012] Vigneting correction estimate = 1.000000
[Mon May 28 20:12:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 20:12:02 2012] Assessing source extent using major axis lower bound
[Mon May 28 20:12:02 2012] Source does appear to be extended
[Mon May 28 20:12:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 20:12:02 2012] Source is confused with source 8
[Mon May 28 21:04:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 21:04:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 28 21:04:31 2012] Initial guess for spatial extent in simple fitting = 13.07"
[Mon May 28 21:04:31 2012] source mask rpix=3.0, npix_max = 49, mask sum = 48, frac = 0.978
[Mon May 28 21:04:31 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 13.07"
[Mon May 28 21:39:12 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_src6.ximg exists
[Mon May 28 21:39:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_src6.csv
[Mon May 28 21:39:12 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon May 28 21:39:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_src6.csv
[Mon May 28 21:39:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 21:39:12 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon May 28 21:39:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon May 28 21:39:12 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon May 28 21:39:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon May 28 21:39:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 21:39:16 2012] Warning, spatial fit 6 centroid is now closest to src. 6
[Mon May 28 21:39:16 2012] Vigneting correction estimate = 1.000000
[Mon May 28 21:39:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 21:39:16 2012] Assessing source extent using major axis lower bound
[Mon May 28 21:39:16 2012] Source does appear to be extended
[Mon May 28 21:39:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 21:48:57 2012] XMMSAS src. selection expression = ellipse(17850.660000, 28637.008400, 783.906023, 783.906023, 0.000000, X, Y)
[Mon May 28 21:48:57 2012] Writing source region out to fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src7_src.reg
[Mon May 28 21:48:57 2012] Extracting stamp from image fullrun_mos2_xmm0555690901_pi300-10000_cl_sm2.00.img.gz, (161, 285) - (251, 375)
[Mon May 28 21:48:57 2012] XMMSAS bgd. selection expression = annulus(17850.660000, 28637.008400, 1306.510038, 2613.020075, X, Y) && !ellipse(18725.723251, 28904.947601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18850.624000, 28112.920400, 1102.208032, 1102.208032, 0.000000, X, Y) && !ellipse(17966.821625, 28174.732239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19523.686996, 29155.348724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20873.242371, 29096.014130, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 21:48:57 2012] Writing fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src7.gif
[Mon May 28 21:50:33 2012] Mean detx,y = (-6073.35, -5880.61) 
[Mon May 28 21:50:34 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 21:50:54 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 21:50:54 2012] Setting source spectrum file to fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon May 28 21:50:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon May 28 21:58:45 2012] Not generating rmf since there are only 72 counts
[Mon May 28 21:58:45 2012] rmf not generated due to insufficient counts
[Mon May 28 22:01:03 2012] Updating aperture counts using extracted products
[Mon May 28 22:01:03 2012] Error reading totcts from fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon May 28 22:01:03 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:01:03 2012] Using photon index=1.80, rate=0.0125, arf fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src7.arf
[Mon May 28 22:01:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:01:03 2012] Updating source flux to 1.7e-13
[Mon May 28 22:01:28 2012] Flag c found in src. 7 procflags, skipping spectral fitting
[Mon May 28 22:01:28 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting