[Mon May 28 19:19:07 2012] Detection parameters:
  Position = (309.2, 213.1) = 15 17 40.60 -62 1 50.5
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 153.1 +/- 17.3
  Background counts = 433.2
  Rate = 0.01 +/- 0.002

[Mon May 28 19:19:07 2012] Off-axis axis estimate = 6.23'
[Mon May 28 19:44:54 2012] Using EEF radius (= 9.55 ")to estimate initial spatial extent for simple fitting
[Mon May 28 19:44:54 2012] Initial guess for spatial extent in simple fitting = 9.55"
[Mon May 28 19:44:54 2012] source mask rpix=2.2, npix_max = 29, mask sum = 24, frac = 0.827
[Mon May 28 19:44:54 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.55"
[Mon May 28 20:11:55 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_src3.ximg exists
[Mon May 28 20:11:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_src3.csv
[Mon May 28 20:11:55 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon May 28 20:11:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_src3.csv
[Mon May 28 20:11:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 20:11:55 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon May 28 20:11:55 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon May 28 20:11:55 2012] Fit fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon May 28 20:12:02 2012] Source 16 is offset by 8.979755 and 2.698812 pixels which is larger than
2 X fitted extent = 4.317585 x 4.317585, not incorporating fit results
[Mon May 28 20:12:02 2012] Vigneting correction estimate = 1.000000
[Mon May 28 20:12:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 20:12:02 2012] Assessing source extent using major
[Mon May 28 20:12:02 2012] Source does appear to be extended
[Mon May 28 20:12:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 21:04:31 2012] Using EEF radius (= 9.55 ")to estimate initial spatial extent for simple fitting
[Mon May 28 21:04:31 2012] Initial guess for spatial extent in simple fitting = 9.55"
[Mon May 28 21:04:31 2012] source mask rpix=2.2, npix_max = 29, mask sum = 24, frac = 0.827
[Mon May 28 21:04:31 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.55"
[Mon May 28 21:39:12 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_src3.ximg exists
[Mon May 28 21:39:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_src3.csv
[Mon May 28 21:39:12 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon May 28 21:39:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_src3.csv
[Mon May 28 21:39:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 21:39:12 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon May 28 21:39:12 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon May 28 21:39:12 2012] Fit fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon May 28 21:39:16 2012] Source 16 is offset by 8.979755 and 2.684858 pixels which is larger than
2 X fitted extent = 4.045812 x 4.045812, not incorporating fit results
[Mon May 28 21:39:16 2012] Vigneting correction estimate = 1.000000
[Mon May 28 21:39:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 21:39:16 2012] Assessing source extent using major
[Mon May 28 21:39:16 2012] Source does appear to be extended
[Mon May 28 21:39:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 21:48:57 2012] XMMSAS src. selection expression = ellipse(26852.134705, 18494.816681, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon May 28 21:48:57 2012] Writing source region out to fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src16_src.reg
[Mon May 28 21:48:57 2012] Extracting stamp from image fullrun_mos2_xmm0555690901_pi300-10000_cl_sm2.00.img.gz, (234, 138) - (384, 288)
[Mon May 28 21:48:57 2012] XMMSAS bgd. selection expression = annulus(26852.134705, 18494.816681, 2175.000000, 4350.000000, X, Y) && !ellipse(30611.329620, 23446.884399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30973.018951, 21004.221603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31879.744000, 20859.877200, 1537.840044, 1537.840044, 0.000000, X, Y)
[Mon May 28 21:48:57 2012] Writing fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src16.gif
[Mon May 28 21:49:21 2012] Mean detx,y = (633.78, 5668.56) 
[Mon May 28 21:49:22 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 21:49:56 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 21:49:56 2012] Setting source spectrum file to fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Mon May 28 21:49:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Mon May 28 21:58:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 28 21:58:13 2012] rmf not generated due to insufficient counts
[Mon May 28 22:01:03 2012] Updating aperture counts using extracted products
[Mon May 28 22:01:03 2012] Error reading totcts from fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Mon May 28 22:01:03 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:01:03 2012] Using photon index=1.80, rate=0.0134, arf fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src16.arf
[Mon May 28 22:01:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:01:03 2012] Updating source flux to 1.7e-13
[Mon May 28 22:01:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting