[Mon May 28 19:19:07 2012] Detection parameters:
  Position = (241.8, 198.9) = 15 18 22.27 -62 2 56.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.7 +/- 19.7
  Background counts = 143.7
  Rate = 0.008 +/- 0.002

[Mon May 28 19:19:07 2012] Off-axis axis estimate = 8.30'
[Mon May 28 19:44:54 2012] Using EEF radius (= 10.58 ")to estimate initial spatial extent for simple fitting
[Mon May 28 19:44:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 28 19:44:54 2012] Initial guess for spatial extent in simple fitting = 10.58"
[Mon May 28 19:44:54 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.047
[Mon May 28 19:44:54 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.58"
[Mon May 28 20:11:55 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_src4.ximg exists
[Mon May 28 20:11:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_src4.csv
[Mon May 28 20:11:55 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon May 28 20:11:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_src4.csv
[Mon May 28 20:11:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 20:11:55 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon May 28 20:11:55 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon May 28 20:11:55 2012] Fit fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Mon May 28 20:12:02 2012] Source 15 is offset by 4.235722 and 8.579814 pixels which is larger than
2 X fitted extent = 1.216138 x 1.216138, not incorporating fit results
[Mon May 28 20:12:02 2012] Vigneting correction estimate = 1.000000
[Mon May 28 20:12:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 20:12:02 2012] Assessing source extent using major
[Mon May 28 20:12:02 2012] Source does appear to be extended
[Mon May 28 20:12:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 21:04:31 2012] Using EEF radius (= 10.58 ")to estimate initial spatial extent for simple fitting
[Mon May 28 21:04:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 28 21:04:31 2012] Initial guess for spatial extent in simple fitting = 10.58"
[Mon May 28 21:04:31 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.047
[Mon May 28 21:04:31 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 10.58"
[Mon May 28 21:39:12 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_src4.ximg exists
[Mon May 28 21:39:12 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon May 28 21:39:12 2012] Fit fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_src4 appears to have run properly
[Mon May 28 21:39:12 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon May 28 21:39:12 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon May 28 21:39:12 2012] Fit fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Mon May 28 21:39:16 2012] Source 15 is offset by 2.310113 and 2.391768 pixels which is larger than
2 X fitted extent = 1.216138 x 1.216138, not incorporating fit results
[Mon May 28 21:39:16 2012] Vigneting correction estimate = 1.000000
[Mon May 28 21:39:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 21:39:16 2012] Assessing source extent using major
[Mon May 28 21:39:16 2012] Source does appear to be extended
[Mon May 28 21:39:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 21:48:57 2012] XMMSAS src. selection expression = ellipse(20991.851822, 17252.529800, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 21:48:57 2012] Writing source region out to fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src15_src.reg
[Mon May 28 21:48:57 2012] Extracting stamp from image fullrun_mos2_xmm0555690901_pi300-10000_cl_sm2.00.img.gz, (204, 161) - (279, 236)
[Mon May 28 21:48:57 2012] XMMSAS bgd. selection expression = annulus(20991.851822, 17252.529800, 1087.500000, 2175.000000, X, Y) && !ellipse(20005.329600, 18043.854000, 787.240823, 787.240823, 0.000000, X, Y)
[Mon May 28 21:48:57 2012] Writing fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src15.gif
[Mon May 28 21:49:58 2012] Mean detx,y = (-5404.19, 5808.19) 
[Mon May 28 21:49:59 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 21:50:13 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 21:50:13 2012] Setting source spectrum file to fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Mon May 28 21:50:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Mon May 28 21:58:32 2012] Not generating rmf since there are only 87 counts
[Mon May 28 21:58:32 2012] rmf not generated due to insufficient counts
[Mon May 28 22:01:03 2012] Updating aperture counts using extracted products
[Mon May 28 22:01:03 2012] Error reading totcts from fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Mon May 28 22:01:03 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:01:03 2012] Using photon index=1.80, rate=0.00787, arf fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src15.arf
[Mon May 28 22:01:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:01:03 2012] Updating source flux to 1.2e-13
[Mon May 28 22:01:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting