[Mon May 28 19:19:07 2012] Detection parameters:
  Position = (232.2, 210.7) = 15 18 28.21 -62 2 1.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.7 +/- 20.0
  Background counts = 145.7
  Rate = 0.007 +/- 0.002

[Mon May 28 19:19:07 2012] Off-axis axis estimate = 7.97'
[Mon May 28 19:44:54 2012] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Mon May 28 19:44:54 2012] Initial guess for spatial extent in simple fitting = 10.41"
[Mon May 28 19:44:54 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.075
[Mon May 28 19:44:54 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.41"
[Mon May 28 20:11:55 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_src9.ximg exists
[Mon May 28 20:11:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_src9.csv
[Mon May 28 20:11:55 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon May 28 20:11:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_src9.csv
[Mon May 28 20:11:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 20:11:55 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon May 28 20:11:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_tfrozen_src9.csv
[Mon May 28 20:11:55 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon May 28 20:11:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_tfrozen_src9.csv
[Mon May 28 20:11:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0555690901_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 20:12:02 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 12.924241 pixels away
[Mon May 28 20:12:02 2012] Vigneting correction estimate = 1.000000
[Mon May 28 20:12:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 20:12:02 2012] Assessing source extent using major
[Mon May 28 20:12:02 2012] Source does appear to be extended
[Mon May 28 20:12:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 21:04:31 2012] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Mon May 28 21:04:31 2012] Initial guess for spatial extent in simple fitting = 10.41"
[Mon May 28 21:04:31 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.075
[Mon May 28 21:04:31 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 10.41"
[Mon May 28 21:39:12 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_src9.ximg exists
[Mon May 28 21:39:12 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon May 28 21:39:12 2012] Fit fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_src9 appears to have run properly
[Mon May 28 21:39:12 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon May 28 21:39:12 2012] fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon May 28 21:39:12 2012] Fit fullrun_mos2_xmm0555690901_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon May 28 21:39:16 2012] Spatial fit model total counts = 508.312000, observed total counts = 467.000000
[Mon May 28 21:39:16 2012] Offset between fit and detection position for source 14 = 3.206260 pixels
[Mon May 28 21:39:16 2012] 516.135000 total counts/ 476.703000 bgd. counts: snr = 1.806030
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 3.206260 pixels
  Position = (230.5, 208.0) = 15 18 29.28 -62 2 16.1
  Extent = 9.8 (3.0-20.8)", rotation angle = 0
  Source counts = 39.4 +/- 22.7
  Background counts = 476.7
  Rate = 0.007 +/- 0.004
[Mon May 28 21:39:16 2012] Vigneting correction estimate = 1.000000
[Mon May 28 21:39:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 21:39:16 2012] Assessing source extent using major axis lower bound
[Mon May 28 21:39:16 2012] Source does appear to be extended
[Mon May 28 21:39:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 21:48:57 2012] XMMSAS src. selection expression = ellipse(20005.329600, 18043.854000, 590.430617, 590.430617, 0.000000, X, Y)
[Mon May 28 21:48:57 2012] Writing source region out to fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src14_src.reg
[Mon May 28 21:48:57 2012] Extracting stamp from image fullrun_mos2_xmm0555690901_pi300-10000_cl_sm2.00.img.gz, (197, 174) - (264, 242)
[Mon May 28 21:48:57 2012] XMMSAS bgd. selection expression = annulus(20005.329600, 18043.854000, 984.051028, 1968.102057, X, Y) && !ellipse(20991.851822, 17252.529800, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 21:48:57 2012] Writing fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src14.gif
[Mon May 28 21:51:46 2012] Mean detx,y = (-6155.75, 4885.26) 
[Mon May 28 21:51:47 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 21:52:05 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 21:52:06 2012] Setting source spectrum file to fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon May 28 21:52:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Mon May 28 21:59:05 2012] Not generating rmf since there are only 39 counts
[Mon May 28 21:59:05 2012] rmf not generated due to insufficient counts
[Mon May 28 22:01:03 2012] Updating aperture counts using extracted products
[Mon May 28 22:01:03 2012] Error reading totcts from fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon May 28 22:01:03 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:01:03 2012] Using photon index=1.80, rate=0.00685, arf fullrun_mos2_xmm0555690901_pi300-10000_pass1_cl_src14.arf
[Mon May 28 22:01:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:01:03 2012] Updating source flux to 1.1e-13
[Mon May 28 22:01:28 2012] Source 14 has fewer than 100.000000 counts, skipping spectral fitting