[Mon May 28 19:18:48 2012] Detection parameters:
  Position = (482.5, 291.1) = 15 15 53.82 -61 56 9.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.1 +/- 19.6
  Background counts = 94.2
  Rate = 0.006 +/- 0.001

[Mon May 28 19:18:48 2012] Off-axis axis estimate = 13.35'
[Mon May 28 19:23:35 2012] Using EEF radius (= 13.10 ")to estimate initial spatial extent for simple fitting
[Mon May 28 19:23:35 2012] Initial guess for spatial extent in simple fitting = 13.10"
[Mon May 28 19:23:35 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.993
[Mon May 28 19:23:35 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.10"
[Mon May 28 19:44:54 2012] fullrun_mos1_xmm0555690901_pi300-10000_cl_pass0_src5.ximg exists
[Mon May 28 19:44:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555690901_pi300-10000_cl_pass0_src5.csv
[Mon May 28 19:44:54 2012] fullrun_mos1_xmm0555690901_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon May 28 19:44:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555690901_pi300-10000_cl_pass0_src5.csv
[Mon May 28 19:44:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555690901_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555690901_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 19:44:54 2012] fullrun_mos1_xmm0555690901_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon May 28 19:44:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555690901_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon May 28 19:44:54 2012] fullrun_mos1_xmm0555690901_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon May 28 19:44:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555690901_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon May 28 19:44:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555690901_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555690901_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 20:11:59 2012] Source 7 is offset by 4.470519 and -0.749617 pixels which is larger than
2 X fitted extent = 1.506276 x 1.506276, not incorporating fit results
[Mon May 28 20:11:59 2012] Vigneting correction estimate = 1.000000
[Mon May 28 20:11:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 20:11:59 2012] Assessing source extent using major
[Mon May 28 20:11:59 2012] Source does appear to be extended
[Mon May 28 20:11:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 20:11:59 2012] Source is confused with source 2
[Mon May 28 20:14:27 2012] Using EEF radius (= 13.10 ")to estimate initial spatial extent for simple fitting
[Mon May 28 20:14:27 2012] Initial guess for spatial extent in simple fitting = 13.10"
[Mon May 28 20:14:27 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.993
[Mon May 28 20:14:27 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 13.10"
[Mon May 28 21:04:31 2012] fullrun_mos1_xmm0555690901_pi300-10000_cl_pass1_src5.ximg exists
[Mon May 28 21:04:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555690901_pi300-10000_cl_pass1_src5.csv
[Mon May 28 21:04:31 2012] fullrun_mos1_xmm0555690901_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon May 28 21:04:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0555690901_pi300-10000_cl_pass1_src5.csv
[Mon May 28 21:04:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0555690901_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0555690901_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 21:04:31 2012] fullrun_mos1_xmm0555690901_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon May 28 21:04:31 2012] fullrun_mos1_xmm0555690901_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon May 28 21:04:31 2012] Fit fullrun_mos1_xmm0555690901_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon May 28 21:39:14 2012] Warning, spatial fit 5 centroid is now closest to src. 2
[Mon May 28 21:39:14 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 23.294735 pixels away
[Mon May 28 21:39:14 2012] Vigneting correction estimate = 1.000000
[Mon May 28 21:39:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 21:39:14 2012] Assessing source extent using major
[Mon May 28 21:39:14 2012] Source does appear to be extended
[Mon May 28 21:39:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 21:42:33 2012] XMMSAS src. selection expression = ellipse(41925.235168, 25276.895203, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 21:42:33 2012] Writing source region out to fullrun_mos1_xmm0555690901_pi300-10000_pass1_cl_src7_src.reg
[Mon May 28 21:42:33 2012] Extracting stamp from image fullrun_mos1_xmm0555690901_pi300-10000_cl_sm2.00.img.gz, (445, 254) - (520, 329)
[Mon May 28 21:42:33 2012] XMMSAS bgd. selection expression = annulus(41925.235168, 25276.895203, 1087.500000, 2175.000000, X, Y) && !ellipse(42160.614136, 24670.396240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42450.139771, 23427.967316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41667.569885, 23759.126465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42379.839905, 22855.535034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40228.734200, 25347.462000, 1982.904057, 1982.904057, 0.000000, X, Y)
[Mon May 28 21:42:33 2012] Writing fullrun_mos1_xmm0555690901_pi300-10000_pass1_cl_src7.gif
[Mon May 28 21:43:35 2012] Mean detx,y = (2649.65, -16833.06) 
[Mon May 28 21:43:36 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 21:43:42 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 21:43:42 2012] Setting source spectrum file to fullrun_mos1_xmm0555690901_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon May 28 21:43:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0555690901_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon May 28 21:45:13 2012] Not generating rmf since there are only 98 counts
[Mon May 28 21:45:13 2012] rmf not generated due to insufficient counts
[Mon May 28 22:01:03 2012] Updating aperture counts using extracted products
[Mon May 28 22:01:03 2012] Error reading totcts from fullrun_mos1_xmm0555690901_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon May 28 22:01:03 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 22:01:03 2012] Using photon index=1.80, rate=0.00578, arf fullrun_mos1_xmm0555690901_pi300-10000_pass1_cl_src7.arf
[Mon May 28 22:01:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 22:01:03 2012] Updating source flux to 2e-13
[Mon May 28 22:01:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 28 22:01:28 2012] xmm0555690901/analysis//spectral/fullrun_mos1_xmm0555690901_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete