[Sun Jul 22 00:48:23 2012] Detection parameters:
  Position = (318.0, 313.0) = 20 28 12.14 41 48 36.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1793.9 +/- 50.8
  Background counts = 11.0
  Rate = 0.4 +/- 0.01

[Sun Jul 22 00:48:23 2012] Off-axis axis estimate = 1.77'
[Sun Jul 22 00:49:45 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 00:49:45 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Sun Jul 22 00:49:45 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Sun Jul 22 00:49:45 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.31"
[Sun Jul 22 01:12:17 2012] fullrun_pn_xmm0555690501_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jul 22 01:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555690501_pi300-10000_cl_pass0_src3.csv
[Sun Jul 22 01:12:17 2012] fullrun_pn_xmm0555690501_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jul 22 01:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555690501_pi300-10000_cl_pass0_src3.csv
[Sun Jul 22 01:12:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555690501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555690501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 01:12:18 2012] fullrun_pn_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jul 22 01:12:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jul 22 01:12:18 2012] fullrun_pn_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jul 22 01:12:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jul 22 01:12:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555690501_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 02:10:08 2012] Warning, spatial fit 3 centroid is now closest to src. 8
[Sun Jul 22 02:10:08 2012] Spatial fit model total counts = 518.614000, observed total counts = 446.000000
[Sun Jul 22 02:10:08 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 22 02:10:08 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 02:10:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 02:10:08 2012] Assessing source extent using major
[Sun Jul 22 02:10:08 2012] Source does appear to be extended
[Sun Jul 22 02:10:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 02:10:20 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 02:10:20 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Sun Jul 22 02:10:20 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Sun Jul 22 02:10:20 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.31"
[Sun Jul 22 02:33:27 2012] fullrun_pn_xmm0555690501_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jul 22 02:33:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555690501_pi300-10000_cl_pass1_src3.csv
[Sun Jul 22 02:33:27 2012] fullrun_pn_xmm0555690501_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jul 22 02:33:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0555690501_pi300-10000_cl_pass1_src3.csv
[Sun Jul 22 02:33:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0555690501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0555690501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 02:33:27 2012] fullrun_pn_xmm0555690501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jul 22 02:33:27 2012] fullrun_pn_xmm0555690501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jul 22 02:33:27 2012] Fit fullrun_pn_xmm0555690501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Jul 22 04:42:50 2012] Spatial fit model total counts = 1824.830000, observed total counts = 1790.000000
[Sun Jul 22 04:42:50 2012] Offset between fit and detection position for source 3 = 0.232561 pixels
[Sun Jul 22 04:42:50 2012] 1831.485000 total counts/ 570.115000 bgd. counts: snr = 52.827647
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.232561 pixels
  Position = (317.8, 313.1) = 20 28 12.23 41 48 36.7
  Extent = 5.9 (5.6-6.2)", rotation angle = 0
  Source counts = 1261.4 +/- 42.8
  Background counts = 570.1
  Rate = 0.2 +/- 0.008
[Sun Jul 22 04:42:50 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 04:42:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 04:42:50 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 04:42:50 2012] Source does appear to be extended
[Sun Jul 22 04:42:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 04:43:03 2012] Counts = 1261.370000, rescaling region sizes by 2.000000
[Sun Jul 22 04:43:03 2012] XMMSAS src. selection expression = ellipse(27599.274340, 27187.048200, 708.296420, 708.296420, 0.000000, X, Y)
[Sun Jul 22 04:43:03 2012] Writing source region out to fullrun_pn_xmm0555690501_pi300-10000_pass1_cl_src3_src.reg
[Sun Jul 22 04:43:03 2012] Extracting stamp from image fullrun_pn_xmm0555690501_pi300-10000_cl_sm2.00.img.gz, (277, 272) - (358, 354)
[Sun Jul 22 04:43:03 2012] XMMSAS bgd. selection expression = annulus(27599.274340, 27187.048200, 2360.988068, 4721.976136, X, Y) && !ellipse(28512.656403, 27085.750732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24988.444855, 25377.603119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27808.359860, 24517.720600, 400.436012, 400.436012, 0.000000, X, Y)
[Sun Jul 22 04:43:03 2012] Writing fullrun_pn_xmm0555690501_pi300-10000_pass1_cl_src3.gif
[Sun Jul 22 04:43:44 2012] Mean detx,y = (130.52, -268.11) 
[Sun Jul 22 04:43:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 04:44:48 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 04:44:49 2012] Setting source spectrum file to fullrun_pn_xmm0555690501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jul 22 04:44:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0555690501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jul 22 05:20:26 2012] Updating aperture counts using extracted products
[Sun Jul 22 05:20:26 2012] Error reading totcts from fullrun_pn_xmm0555690501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jul 22 05:20:26 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 22 05:20:26 2012] Using photon index=1.80, rate=0.246, arf fullrun_pn_xmm0555690501_pi300-10000_pass1_cl_src3.arf
[Sun Jul 22 05:20:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 22 05:20:26 2012] Updating source flux to 5.8e-13
[Sun Jul 22 05:21:33 2012] Flag p found in src. 3 procflags, skipping spectral fitting
[Sun Jul 22 05:22:23 2012] Reading fit data from xmm0555690501/analysis//spectral/fullrun_pn_xmm0555690501_pi300-10000_pass1_cl_src3_pl.csv
[Sun Jul 22 05:22:23 2012] Spectral fit parameter nH value = 4.15856e+21
[Sun Jul 22 05:22:23 2012] Spectral fit parameter PhoIndex value = 9.99866
[Sun Jul 22 05:22:23 2012] Failed to get F(0.3-8.0) from xmm0555690501/analysis//spectral/fullrun_pn_xmm0555690501_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sun Jul 22 05:22:23 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 22 05:22:23 2012] Using Nh = 4.2e+21, photon index=10.00, rate=0.246, arf fullrun_pn_xmm0555690501_pi300-10000_pass1_cl_src3.arf
[Sun Jul 22 05:22:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 22 05:22:23 2012] Updating source flux to 2.6e-13